Professional Documents
Culture Documents
PM 717
PM 717
5 Monitor
PM2.5 Monitor
PM-717
Sample
It is necessary to keep the humidity of air sample lower, to Air
minimize mass variation of PM by moisture absorption or
deliquescence. PM-717 applies a unique system that
controls the humidity by mixing the dry air with sample. PM2.5
This system prevent to loss the excessive evaporation from Cyclone
the volatile matters in PM without heating the sample. Dry Air
PTFE tape filter that has few effected by moisture and gas
components.
230
Inlet with cyclone,
Linearity ±5% of equivalence film’s value Temp./RH sensor
Span drift with ±10% of mass concentration Desktop type (weight : approx. 15kg)
standard air sample
Zero drift with clean air ±2μg/m3(24h value)
875
LCD display Measuring data, Output range, Alarm, Performance
and Control information
Analog output for DC 0∼1V: Rack case type (weight : approx. 40kg)
telemeter(Optional) 24h value(Daily): 0 - 200 µg/m3,
1h value (as provisional): 0 - 200 / 500 / 1000 µg/m3
3 ranges auto/manual switching
*Starting range is selectable.
*Fixed range is also available.
Contact signals: Output range, Adjustment,
Power off, Failure report etc.
640 780
Power requirement AC 100 V, 50/60 Hz, approx. 450 VA
Flow Diagram
1000
Sample air
PM2.5
Temp/RH Pressure Cyclone
sensor for sensor for
outdoor outdoor Beta source / Dry air
85
Sampling head
T,H P Air mixer
Conditioned air 540 690
T,H Temp/RH
sensor
Valve for sampling Product Code
head movement
PM-717-
F PTFE tape
filter
Flow Flow sensor Detector
controller for for sample P T1 Desktop type
sample Pressure Pump A1 Rack case type
Dryer
sensor
S1 Outdoor case type