Professional Documents
Culture Documents
Cap 59C Factories and Industrial Undertakings (Blasting by Abrasives) Special Regulations
Cap 59C Factories and Industrial Undertakings (Blasting by Abrasives) Special Regulations
版本日期
Version date
28.4.2023
經核證文本
Verified Copy
( 法例發布條例》( 第 614 章 ) 第 5 條 )
《
(Legislation Publication Ordinance (Cap. 614), section 5)
此文本所載條文,如並非正在實施,會有附註作說明。 Any provision included in this copy that is not in force is marked
accordingly.
E-1 E-2
第 59C 章 Cap. 59C
本為 1969 年第 35 號法律公告 —— 1978 年第 158 號法律公告,1981 Originally L.N. 35 of 1969 — L.N. 158 of 1978, L.N. 315 of 1981, R. Ed.
年第 315 號法律公告,1981 年編正版,1984 年第 238 號法律公告, 1981, L.N. 238 of 1984, L.N. 15 of 1994, L.N. (C) 123 of 1995 (Chinese
1994 年第 15 號法律公告,1995 年第 (C)123 號法律公告 ( 中文真確本 ), authentic version), L.N. 307 of 1998, E.R. 1 of 2021, 5 of 2023
2021 年第 1 號編輯修訂紀錄,2023 年第 5 號
T-1 T-2
第 59C 章 Cap. 59C
條次 頁次 Regulation Page
1. 引稱 1 1. Citation 2
2. 釋義 1 2. Interpretation 2
3. 在噴砂工序中使用砂粒或游離硅石作為磨 1 3. Restriction on use of sand or free silica as an 2
料的限制 abrasive in a blasting process
1 2
第 59C 章 第1條 Regulation 1 Cap. 59C
1. 引稱 1. Citation
本規例可引稱為《工廠及工業經營 ( 噴砂打磨 ) 特別規例》。 These regulations may be cited as the Factories and Industrial
Undertakings (Blasting by Abrasives) Special Regulations.
2. 釋義 2. Interpretation
在本規例中,噴砂工序 (blasting process) 指使用噴射砂粒、金 In these regulations blasting process (噴砂工序) means the
屬砂或粗砂或其他物料作為磨料,並以噴出壓縮空氣或水蒸 cleaning, smoothing, roughening or removing of part of the surface
汽或水或利用輪推動磨料的噴射,從而清潔、磨滑、磨粗或除 of any substance or thing including granite, stone or brick by
去任何物質或物件 ( 包括花崗巖、石塊或磚塊 ) 的部分表面的 the use as an abrasive of a jet of sand, metal shot or grit or other
工序。 material propelled by a blast of compressed air or steam or water
or by a wheel.
3 4
第 59C 章 第3條 Regulation 3 Cap. 59C