BEE GU Assignment Question Bank

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Gandhinagar Institute of Technology

DOC NO: 4026

Assignment/Question Bank

Program (UG/PG): UG

Name of Department: Electrical Engineering

Academic Year: 2022-23

Semester: 1st

Subject Code: 10030101

Subject Name: Basic of Electrical and Electronics


Engineering

Name of the Institute: Gandhinagar Institute of


Technology

Electrical Department 10030101 BEE


Gandhinagar Institute of Technology

Question Bank

Assignment No: __________ Date: __________

1. Explain Current and Voltage divider rule.


2. State and Explain Kirchhoff’s Voltage Law (KVL) & Kirchhoff’s Current Law (KCL) with
suitable diagrams & equations.
3. Explain Ohm’s law and limitation of it.
4. Determine mesh currents I1, I2 and I3 for fig.3. All the resistances are in Ω.

5. Analyze Series and parallel circuit having resistors only as elements and state the results.
6. Explain Superposition with example.
7. Explain Thevenin Theorem.
8. Define Norton Theorems.
9. Explain time-domain analysis of first-order RL circuits.
10. Explain time-domain analysis of first-order RC circuits.
11. Explain Electrical circuit elements (R, L and C).
12. Explain voltage and current sources.
13. Explain classification of circuit elements.
14. Determine the Average and R.M.S. value of sinusoidal wave form.
15. Three currents are represented by i1=25coswt, i2 = 20 sin (wt-π/2), i3 = 15 sin (wt-π/6). Find
the value of resultant current and phase angle. Write the equation of resultant current.
16. Define the following for AC circuits :
[1] Form factor
[2] Amplitude factor
[3] Power factor
[4] RMS Value
[5] Average Value
17. Explain how ac sinusoidal EMF is generated?
18. Differentiate between insulator, conductor, and semiconductor.
19. Write a short note: V-I characteristic of P-N junction diode.
20. Draw and Explain bridge rectifier. Explain advantage and disadvantage of bridge rectifier over
full wave rectifier.
21. Explain Diode approximations in detail.
22. Explain LED diode and photo diode.

Electrical Department 10030101 BEE


Gandhinagar Institute of Technology

23. What is zener breakdown? What is avalanche breakdown? Compare both the type of
breakdown.
24. Explain V-I characteristic of Zener diode.
25. Give comparison between CE, CB and CC configuration of transistor.
26. What are the characteristics of an ideal op-amp? Draw its equivalent circuit of Op-amp and
explain voltage transfer curve.
27. Explain CE configuration in detail.
28. A Series RLC circuit consists of resistance of 500 Ω, inductance of 50mHand a capacitance Of
20pF.Find
[1] The resonant frequency
[2] The Q factor of the circuit of resonance
[3] The half power frequency
29. Draw the Phasor diagram in R-L circuit. Draw impedance triangle and power triangle.
30. Explain series R-L-C circuit with the phasor diagram for XL>XC; XL<XC & XL=XC.
31. Establish relation between line voltage & phase voltage and current relation in 3-phase star
connection. Draw phasor diagram.
32. Prove the equation for measurement of Electrical power in 3-phase circuit by two wattmeter
method for balanced load with phasor diagram.
33. Establish relation between line voltage & phase voltage and current relation in 3-phase delta
connection. Draw phasor diagram.
34. Draw and explain the construction of the transformer.
35. Write the difference between 1-phase and 3-phase transformer.
36. What is an autotransformer? Explain.
37. Explain ideal transformer with its phasor diagram.
38. Explain the working principle of 3-phase induction motor
39. Explain the specifications of Battery and List out the materials required for residential wiring.
40. Why fuse is always connected in series with phase wire? Draw well labeled circuit diagram for
residential wiring which includes energy meter, main switch, distribution board, switch board
and load.
41. What are the different methods of earthing? Elaborate pipe earthing method with the help of
diagram.
42. Enlist various types of lamps and various types of wiring methods.
43. State types of Fuse and explain any one and classify various types of lighting scheme and
explain any two.
44. Explain in brief the following.
[1] A-h & W-h capacity of a battery
[2] ELCB & MCB
45. What is Grounding & Earthing? Analyze concept of protection with a device-MCB used at our
residence.

Electrical Department 10030101 BEE

You might also like