Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Fuel Analysis Specification Report Report date

ASIAN-ALLIANCE OFFSHORE PTE LTD 04-Jan-2023

ANAHITA (9737917)
Offshore Soyo Block 17, 11-Dec-2022

Specification
Based on this sample the specification is met

Sample Number FUJ22F013338


592.477 MT
Bunker Port Offshore Soyo Block 17 calculated weight
Bunker Date 11-Dec-2022
Supplier TOTAL ENERGIES
Loaded From BORINGIA SWAN
Quantity per C.Eng. Not Stated

Product Type MGO


Fuel Usage Not Stated
Sampling Point Not Stated
Sampling Method Not Stated
Seal Data 7598727 (VPS, Intact)
Marpol Seal 7598028

Source Of Data B.D.N.


Density @ 15°C 847.5 kg/m³
Viscosity @ 40°C 3.6 mm²/s
Sulfur 0.107 % m/m
Volume @ 15°C 699.997 m³
Quantity 593.247 MT

Sent From Luanda


Date Sent 27-Dec-2022
Arrived at Lab 31-Dec-2022

Indicates specification is met. Page 1 of 3


FUJ22F013338
ANAHITA (9737917)

Test Results
Unit Test Results DMA Spec Test Method
Density @ 15°C kg/m³ 847.5 890.0 ISO 12185
Viscosity @ 40°C mm²/s 3.314 2.000\6.000 ISO 3104
Micro Carbon Residue % m/m < 0.10 0.30 ISO 10370
10%
Sulfur % m/m 0.16 1.50 ISO 8754
Ash % m/m < 0.01 0.01 LP 1001
Pour Point °C -3 -6\0 ISO 3016
Flash Point °C 69.0 60.0 ISO 2719-A
Visual Appearance - Pass Bright&Clear LP 1902
Calculated Cetane Index¹ - 51 40 ISO 4264
Acid Number mg KOH/g < 0.1 0.5 LP 2003
FAME content % V/V < 0.1 0.1 EN 14078
Water % V/V < 0.01 ASTM D6304-C
Vanadium mg/kg <1 IP 501
Sodium mg/kg <1 IP 501
Aluminium mg/kg <1 IP 501
Silicon mg/kg <1 IP 501
Iron mg/kg <1 IP 501
Nickel mg/kg <1 IP 501
Calcium mg/kg <1 IP 501
Magnesium mg/kg <1 LP 1101
Zinc mg/kg <1 IP 501
Phosphorus mg/kg <1 IP 501
Potassium mg/kg <1 LP 1101
Net Specific Energy¹ MJ/kg 42.74 ISO 8217
Aluminium + Silicon mg/kg <2
Temp.@ 10% recovery °C 210 ISO 3405
Temp.@ 50% recovery °C 288 ISO 3405
Temp.@ 90% recovery °C 353 ISO 3405
FTIR Screening - Pass LP 2403
¹ Calculated value

Specification Results compared with ISO 8217:2012 specification DMA, table 1 and
annex A. Based on this sample and the tested parameters the
Comparison
specification is met.

Quantity
Calculated Weight 592.477 MT 592.477 MT
calculated weight
Calculated Mass 593.247 MT
The calculated quantities are based on BDN Volume and tested
density. A weight factor of 1.1 kg/m³ (ASTM D1250-80 Table 56) has
been applied to calculate the weight.

Page 2 of 3 FUJ22F013338
ANAHITA (9737917)

Best Regards,
On behalf of Veritas Petroleum Services BV
Jubinraj K.P
Technical Support Engineer
Best wishes for the Holiday Season and a prosperous New Year
For assistance or further information on this report please contact your nearest VPS office or contact us
directly at Tel : +65 67792475, Email : Singapore@vpsveritas.com

Reference to part(s) of this report which may lead to misinterpretation is prohibited.

Page 3 of 3 FUJ22F013338

You might also like