>\ amigurumi_magic_world
wonin/ Londres
Halloween Bunni
TERNMATERIALS:
Worsted weight yarn:
Franken-usa - black, green, grey
Candy-usa - white, orange, yellow
10mm safety eyes
3.5mm crochet hook
Stuffing
Yarnneedle
Scissors
Stitch marker
ABBREVIATIONS:
sc- single crochet
inc -increase
dec - decrease
blo - back loop onlyFRANKEN-USA: HEAD
START WITH BLACK
R1-sc 6 ina magic ring (6)
R2-incx6 (12)
R3 - (sc, inc) x 6 (18)
R4- (sc 2, inc) x 6 (24)
R5 - (sc 3, inc) x 6 (30)
R6 - (sc 4, inc)x 6 (36)
R7 - USE BLACK AND GREEN
YARN. scall around: (sc with
black, sc 3 with green) x 9 (36)
USE ONLY GREEN YARN
AFTERR7.
R8 -R12- sc all around
R13 - (sc 4, dec) x 6 (30)
R14 - (sc 3, dec) x 6 (24)
R15 - (se 2, dec) x6 (18)
Add eyes between R11 and
R12, 6 st’s apart. Add stuffing.
R16 - (sc, dec) x 6 (12)
Do not cut yarn. Move onto
the body.
BODY
R17 - (se, ine) x 6 (18)
R18- (sc2, inc) x 6 (24)
R19-sc all around (24)
SWITCH TO GREY
R20 to R22 -scall around (24)
R23 - (sc 2, dec) x6 (18)
Add stuffing.
R24 - (sc, dec) x 6 (12)
R25 -decx 6 (6)
Add more stuffing if needed.
Cut a tail and close the hole.
Do not over stuff the body. You
want the bottom kind of flat so
it will sit on it's own. If the
bottom is too rounded, you
can flatten it by running the
tail through the bottom center
and pull up through the head.EARS: GREEN (MAKE 2)
R1-sc8inamagic ring (8)
R2 to R6-sc all around (8)
R7 - (sc 2, dec) x 2 (6)
Leave a long tail for sewing.
Do not stuff
ARMS: GREEN (MAKE 2)
R1-sc6ina magic ring (6)
R2 to R3-sc all around (6)
Leave a long tail for sewing.
Do not stuff
FEET: GREY (MAKE 2)
R1- sc 6ina magic ring (6)
R2- (inc, sc, inc) x 2(10)
R3- sc all around (10)
R4- (dec, sc, dec) x 2 (6)
Leave a long tail for sewing.
Lightly stuff
TAIL: GREEN
R1-sc 8 ina magic ring (58)
R2-scall around (8)
R3 - (sc 2, dec) x 2 (6)
Leave along tail for sewing.
Lightly stuff. Close the hole
BOLTS: GREY (MAKE2)
R1-sc 4ina magic ring (4)
R2-sc all around blo (4)
Leave along tail for sewing.
Do not stuffASSEMBLY
Sew ears on top of the head
Sew arms on the side, right below R17.
Sew feet a few rows below the arms.
Sew tail on back of the bunny.
Sew bolts on sides of the head.
Use black yarn to make the scar,
Add pink cheeks if desired.
CANDY-USA
To make Candy-usa, follow the same pattern as Franken-usa.
Use white yarn for R1 to R7
Switch to orange for R8 to R18.
Switch to yellow for R19 to R25.
Use white for ears, orange for arms, and yellow for feet and tail.