Professional Documents
Culture Documents
Mir 001
Mir 001
Mir 001
PRODUCT BENEFITS
PRODUCT FEATURES
BEST IN CLASS
HIGH
1737* On smooth masonry surface by brushing
MEDIUM
*Currently available in 1737 1 COAT
LOW shades as per the Colourworld
Fandeck 185 - 225
sq.ft/ltr**
AVAILABLE PACKS FINISH
2 COATS
MATT LOW SHEEN HIGH SHEEN HIGH GLOSS 95 - 110
sq.ft/ltr**
SILKY SMOOTH
1 ltr 4 ltr 10 ltr 20 ltr
Also available in 50 ml,100 ml, 200 ml and 500 ml Refer to sheen levels in technical details **Actual coverage may vary from the quoted coverage due
Shelf life: 3 years from date of manufacture (1 year in case to factors such as method and condition of application and
of Gold (M003) & Silver (M002) shades), in original tightly surface roughness and porosity.
closed containers away from direct sunlight and excessive
heat.
HOW TO APPLY
PRE PAINTING STEPS PAINT APPLICATION PROCESS
APPLICATION CODE THINNER DILUTION % APPLICATION RECOATING
VISCOSITY 1 PERIOD
PLASTER New masonry surfaces STEP 1
must be allowed to cure completely. SANDING SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN
It is recommended to allow 28 days
STEP 2
as the curing time for new masonry YELLOW METAL PRIMER 1087
surfaces. (ALUMINIUM/GI) / *
BRUSH 4 - 10 BRUSH 30 - 40
METAL PRIMER (FERROUS METAL) / 0005 MTO SPRAY 12 - 15 SPRAY 20 - 25 6 - 8 HRS
CLEANING Surface should be DECOPRIME ST (MASONORY) / 0359
free from any loose paint, dust or WOOD PRIMER (WOOD) 0007
grease. Growths of fungus, algae STEP 3
or moss should be removed by KNIFING PASTE FILLER (METAL 0016 WATER 6 - 8 HRS
/ WOOD) BASED ON BASED ON
wire brushing and water. In case of OR
REQUIREMENT REQUIREMENT
WALL PUTTY (MASONORY) 1354 MTO 4 - 6 HRS
areas having excessive dampness
PUTTY KNIFE
use Asian Paints DampBlock to
STEP 4
limit further dampness. When SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN
SANDING
the underlying surface exhibits
STEP 5
chalkiness, in spite of thorough YELLOW METAL PRIMER 1087
surface cleaning, use Asian Paints (ALUMINIUM/GI) / BRUSH 4 - 10 BRUSH 30 - 40
METAL PRIMER (FERROUS METAL) / 0005 MTO *
SPRAY 12 - 15 SPRAY 20 - 25 6 - 8 HRS
SmartCare Exterior Sealer. 0359
DECOPRIME ST (MASONORY) /
FILLING FOR CRACKS For filling WOOD PRIMER (WOOD) 0007
masonry upto 3mm use Asian Paints STEP 6
SmartCare Crack Seal. SAND THE SURFACE WITH SAND PAPER 320 AND WIPE CLEAN
SANDING
FILLING FOR HOLES & DENTS STEP 7
In case of dents and holes use FIRST COAT APCOLITE 0001 BRUSH 8 - 10 BRUSH 55 - 60
* 6 - 8 HRS
PREMIUM GLOSS ENAMEL MTO SPRAY 15 - 20 SPRAY 22 - 25
Asian Paints Acrylic Wall Putty or 0026
BRUSH / ROLLER / SPRAY
white cement and fine sand in the
ratio 1:3 STEP 8
SECOND COAT APCOLITE 0001 BRUSH 8 - 10 BRUSH 55 - 60
Apcolite Premium Gloss Enamel PREMIUM GLOSS ENAMEL 0026
MTO *
SPRAY 15 - 20 SPRAY 22 - 25 6 - 8 HRS
should not be applied on surfaces BRUSH / ROLLER / SPRAY
/ substrates that are subjected to
continuous seepage or dampness. 1. As measured through a Ford cup.
2. Recoat period is quoted for 25°C and 50% Relative Humidity, these may vary under different conditions.
*
Mineral Turpentine Oil
3. Ensure that the metal substrates are free from oil, grease and rust before paint application.
Finishes for Wood / Wall / Metal Surfaces
*These shades are for reference only. Please refer to the Colour Spectra or Colour Palette for correct shade reference
ADDITIONAL INFORMATION
Version No. VN01/01/2014. Please note that this datasheet supersedes all previous versions
For Feedback/complaints, write to Marketing Manager Services, Asian Paints Limited, 6A, Shantinagar, Santacruz(E), Mumbai 400 0 55, India