OE .
a unite
U-nite Fasteners Technology AB
Hogttorp, $-451 95 Uddevalls, Sweden
Tel +46 (0)822-65 33 90 + Fax +46 (0)522-873 51
Product certificate Org.nr $56286 ~ 9858
E-mail: info@unise
Item www unitefasteners.com
AAI3K (20 Pan 4,8), drilling screw for steel sheet
(Farmer screw)
Material
SAE 1022 (Swedish standard $$2132 / German W.-nr: 1.1133)
Dimension
4,8x35mm, reduced drill point #1 - drill capacity in steel sheets 2x1,25mm
Carbonitriding and tempering, in-carbonization dept: 0,10 — 0,20mm
Surface hardness: 500 — 600 HV1, Core hardness: 280 - 400 HV1
Surface treatment
Zinc plated, Cr3+ min. 201m, measured at top/side of head part.
Corrosivety class C2, after painting C3 (EN-ISO 12944-2)
Design values (According to EN 1993-1-3)
Characteristic value, shear resistance Fy,r.: 5 200N/screw (Swedish National choice)
The design values for tensile resistance Fx. and shear resistance Fy, are determined
according to the formula
1,25Fy,rk
Fyra = 1,25Fyra = = ————
M2,
Higher values can be used after testing in accordance with Annex D of EN 1990.
“ERE EEE
Cut washer
Material: EPDM-black
Dimension: 9,5x4,5x3,5 mm
EPDM temperature interval: -40°C to +80°C
‘EEEEEEELEA PEERED
Powder paint — polyester >404m
We hereby certify that the product is in compliance with the criteria’s stated in this
document.
2016-02-26
nite Fasteners, Technology AB
Rune Albertsson
INGAR | LINDAB-KONGERNEN / ALINDAB COMPANY
TA