1CB8-B1AW012MQ0-Engine Oil Leak

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

12/9/21, 6:24 PM 1CB8-B1AW012MQ0-Engine oil leak

Technical Service Bulletin (TSB) - VF7KFRHC8CS506525


B1AW012MQ0 : Version 2 of 04/03/2015 Cancel and replace the document of 02/09/2014
FOR : DS 5 AND DW10CTED4 FAP TURBO DIESEL UNTIL RPO 13549

CUSTOMER
ENGINE OIL LEAK
SYMPTOM :
CONDITIONS IN
WHICH FAULT ON USING THE VEHICLE
APPEARS :

1. ORIGIN
Engine oil sump seal.

2. Service Action
Reworking of the engine oil sump seal.

2.1. Consumables
Sealing paste index "E10" (Grey silicone).

2.2. Tooling

Tool Reference Description


[0199-J] Oil sump seal cutting chisel

Figure : E5AB0QZT

2.3. Check

https://service.citroen.com/docapvAC/affiche.do?ref=B1AW012MQ0&refaff=B1AW012MQ0&typeDoc=3&idFct=FCT0512 1/2
12/9/21, 6:24 PM 1CB8-B1AW012MQ0-Engine oil leak

Figure : B1AW009D

Place the vehicle on a 2-post lift.


Remove the under-engine protector (According to equipment).
Check for the presence of oil at the engine oil sump (1) (Gearbox end ) :
If there is an oil leak at engine oil sump (1) (Gearbox end ) : Apply this information
If there is no oil leak at engine oil sump (1) (Gearbox end ) : This information does not apply

2.4. Repair

ESSENTIAL : Observe the safety and cleanliness recommendations : For all repairs

CAUTION : To avoid damaging the engine oil sump (1) and make its removal easier ; Detach the engine oil sump (1) ; Using the tool
[0199-J]

CAUTION : Observe the location of the different bolts on refitting the engine oil sump (1)

DS 5 AND DW10CTED4 FAP TURBO DIESEL


Repair the sealing of the engine oil sump (1).

2.5. Repair time


DS 5 UNTIL RPO 13549 AND DW10CTED4 FAP TURBO DIESEL
Invoicing time : 4,00H.
Operation code : 9R39 RP00.
Cause code : 0110.

3. PRODUCTION SOLUTION
From RPO number 13550 : Modification of the manufacturing process.

N.B. : No longer complete a quality report (CRI) to report an incident that occurs on a vehicle manufactured before the production
solution ; On the other hand, send a quality report (CRI) for all cases of recurring problems after application of this information or fo
all incidents occurring on a vehicle manufactured after the production solution

https://service.citroen.com/docapvAC/affiche.do?ref=B1AW012MQ0&refaff=B1AW012MQ0&typeDoc=3&idFct=FCT0512 2/2

You might also like