Professional Documents
Culture Documents
Pressure Regulator
Pressure Regulator
Pressure Regulator
Built upon the knowledge you have about Simulink, and the information given on this
sheet, construct a simulation program for the pressure regulator.
You need to provide a short report showing the simulation results. When showing your
results, you MUST show that the fluctuation in the load, will not affect the pressure on
the vessel. You need to also show that you can adjust the pressure setting by changing f.
Any question do not hesitate to ask TAs.
You will also need to run your program for TAs after you complete your programming.
(1) f − Kx − Bx − Pc A =
Mx P1 =
600 × 6895 ( Pa ) 10−3
Ra =
(2)=qc Ra ( P2 − Pc=) =
f 60000 N Rw 2
= q1 0 = x ≤ 0 or P1 ≤ P =
K 4000 N /m M 0.4 Kg
(3)
q1 = Rwx P1 − P2 x > 0 & P1 > P2 B = 20000 Ns / m
(4) qc + Ax =0 A = 0.0314 m 2
β dP β
(5) (q1 − qc − qL ) =2 = 60000
VL dt VL
q L (m 3 / sec)