Professional Documents
Culture Documents
Project Report Details
Project Report Details
Project Report Details
Font INTRODUCTION
16
Our project is design and fabrication of auto charging grinding machine. It is used
to grind the machining surfaces to super Finish and accuracy. The principle parts of this
attachment are main body, motor with pulley, bearings, rope pulley and alternator etc.
After Paragraph keep
So this project “Solar Powered Auto Charging Grinding Machine” is very much
spacing 10 points
useful, since it is provided with good quality of powerlayout—go
(path---page sources andto simple operating
spacing option—select
mechanism. Hence “Each And Every Drop Of Fuel Saves Our Economy And Meet The
after option—enter 10pt)
Needs” is the saturation point that is to be attained as soon as possible[1].
In order to achieve this saturation point we have to save and seek for some other
source of power. This power, the alternate power must be much more convenient in
availability and usage. The next important reason for the search of effective, unadulterated
power are to save the surrounding environments including men, machine and material of
both the existing and the next fourth generation from pollution, the cause for many harmful
happenings and to reach the saturation point[2].
The most talented power against the natural resource is supposed to be the electric
and solar energies that best suit the automobiles. The unadulterated zero emission
electrical and solar power, is the only easily attainable alternate source. Hence we can also
incorporate the solar power in the field of automobile, the concept of many Multi National
Companies (MNC) and to get relieved from the incorrigible air pollution [3].
sub section font 16
1.1 Classification of Solar Powered Machines
1.1.1 Sub Classification Sub section font 14
NOTE:
1. ALL FONTS ARE IN TIMES NEW ROMAN
2. SPACING 1.5
3.
Chapter-2
Font 10
bold
LITERATURE SURVEY
Author Y et al., [2] suggested that lately the focus has been on high-speed grinding and
machining. The theory is that a grinding wheel, which is literally millions of tiny cutting
tools, will remove more material the faster it is rotated. We have all read about research
initiatives using special wheels. But the higher the wheel speeds, the higher the
temperatures in the grinding zone.
Chapter-3
OBJECTIVES
The main objective is to make a machine that is compact and rigid in size by using
non-conventional resources. To design and fabricate a hybrid system that can be on any
place of small power application.
Chapter-4
METHODOLOGY (How the Project is carried out)
Cells may be connected in parallel to achieve the desired voltage. The optimum
operating voltage of a photo voltaic cell is generally about 0.45 volts at normal
temperaures, and the current in full sunlight may be taken 0.270 amperes / sq. mm.If the
exposed area of the cell is 40 square cm (6.2sq.in) or 40*10^-4 sq. m, the current and
REFERENCES
[1] Name of Author, “ Title of Research paper”,Publication,year,ISSBN, P.NO.___
to___ DOI:
[2]