Professional Documents
Culture Documents
Exit Exam Mode1 ECE Computer
Exit Exam Mode1 ECE Computer
a.
value of assigned to C
b.
Value of i assigned to C and the i incremented by 1
c.
i to be incremented by 1 and the value of i assigned to C
d.
i to incremented by 1
Your answer is correct.
b/c precedence assigns i to c then increment
Basic Elements, Syntax and Semantics of a high-level programming, CLO3
The correct answer is:
Value of i assigned to C and the i incremented by 1
Question 2
Which of the following statements about object-oriented programming is true?
a.
It is a programming paradigm that emphasizes the use of objects and classes
b.
It is a type of programming that focuses on machine code
c.
It is a programming language that is only used for database development
d.
It is a programming language that is used for web development
Your answer is correct.
Object Oriented Programming Principles
The correct answer is: It is a programming paradigm that emphasizes the use of objects and
classes
Question 3
Which of the following is not an advantage of using a shared L2 cache over dedicated
caches?
a.
A faster access to the L2 cache by each core.
b.
Reduce miss rates.
c.
No replication of data shared by multiple cores.
d.
Dynamic amount of shared cache to each core.
Question 4
For voltage divider biased n-channel JFET shown in fig 3. below, operates at ID = 2.5 mA
and VDS = 8V. The parameters of JFET are IDSS = 10 mA and VGS (off) = – 5 V. Find the
value of RS.
a.
10kΩ
b.
7kΩ
c.
5kΩ
d.
6kΩ
Question 5
Let memory locations with the A002H and A003H logical addresses contain 00H and 02H
respectively. After executing the following fragment of code all the choice will become true
except _____
b.
CX=0000H
c.
[0B000H]=02H
d.
ZF=1
Your answer is incorrect.
Microcontrollers and Interfacing
The correct answer is:
ZF=1
Question 6
Find the Laplace transform of e^(-at) u(t) and its ROC
a.
1/s, Re{s}>a
b.
1/(s−a), Re{s}>-a
c.
1/s, Re{s}>a
d.
1/(s+a), Re{s}>-a
Your answer is correct.
Substitute to Laplace equation
Signals And Systems Analysis
Laplace transform
CLO1
The correct answer is:
1/(s+a), Re{s}>-a
Question 7
The Fourier series coefficient of time domain signal x (t) is X[k] = jδ[k-1] – jδ[k+1] + δ[k+3] +
δ[k-3], the fundamental frequency of the signal is ω=2π. The frequency domain of the
signal is:
a.
b.
2(cos3πt – sinπt)
c.
d.
x(t)=∑^∞_k=−∞X[k]^(ej2πkt)
= je^(j2πt) – je^(-j2πt) + e^(j6πt) + e^(-j6πt)
= 2(cos 6πt – sin 2πt).
Signals and Systems Analysis ,
b.
c.
4 ∟75°A
d.
Question 9
Which one of the following should not happen as one goes down the memory hierarchy?
a.
b.
c.
Increasing capacity
d.
a.
b.
All.
c.
d.
Embedded systems
The correct answer is: Hard-real time system.
Question 11
Which of the following loops executes at least once, regardless of whether the condition is
true or false?
a.
while loop
b.
do-while loop
c.
for loop
d.
if-else loop
Feedback
Your answer is incorrect.Basic Elements, Syntax and Semantics of a high-level
programming, CLO3
do-while loop
Question 12
What is the output states of flip flops shown in fig 1 below,
a.
Q = 0 always
b.
Q toggles
c.
Q is undefined
d.
Q = 1 always
Feedback
Your answer is incorrect.
Q toggles
Question 13
Calculate the current through 48Ω resistor in the circuit shown in Fig.1d. .Assume the diodes
is silicon and forward resistance of each diode is 1 Ω..
a.
208.3mA
b.
200mA
c.
172mA
d.
179mA
Feedback
Your answer is correct.
Applied Electronics I
Semiconductor diodes and their applications
CLO2
The correct answer is:
172mA
Question 14
Which TCP/IP protocol is recommended for use in applications that need immediate and
fundamentally dependable delivery operations?
a.
b.
c.
d.
a.
Superposition theorem
b.
Millman's theorem
c.
d.
Thevenin's theorem
Feedback
Your answer is correct.
Since the frequencies of the two sources are different only superposition theorem can be
used.
Superposition theorem
Question 16
What is an inline function?
a.
b.
c.
d.
a.
b.
c.
d.
Applied Electronics I
BIT transistor and its application
CLO2
The correct answer is:
a.
F3 ,ACk3 and F7
b.
F1 ,ACk3 and F3
c.
F1 ,ACk2 and F7
d.
F1 ,ACk2 and F7
Feedback
Your answer is incorrect.
Because there is time out, Frame 3 will be retransmitted again.
F1 ,ACk3 and F3
Question 19
A PC-relative mode branch instruction is 3 bytes long. The address of the instruction, in
decimal, is 256028. What is the branch target address (effective address) if the signed
displacement in the instruction is -31?
a.
256031
b.
256000
256000
256000
c.
256025
d.
256024
Feedback
Your answer is correct.
256000
256000
256000
Question 20
For the hexadecimal main memory address 111111, what is the Line value for a direct-
mapped cache, in hexadecimal format?
a.
444
b.
222
c.
111
d.
333
Feedback
Your answer is incorrect.
444
Question 21
In network communication, the _______________ address is used to deliver a frame to the
correct computer on the network.
a.
Web
b.
Port
c.
MAC
d.
IP
Feedback
Your answer is incorrect.
Frame is a layer-2 data unit and MAC address is used to identify frames in data link layer.
Data Communication and Computer Networks
Data Link Layer
-Addressing
CLO1
a.
5A
b.
2.5A
c.
0A
d.
10A
Feedback
Your answer is incorrect.
Circuit Theorems & Methods of Analysis, CLO2
The correct answer is:
0A
Question 23
Which of the following is the correct syntax for instantiating an object from a class in Java?
a.
new Object ClassName();
b.
new ClassName();
c.
ClassName.instantiate();
d.
ClassName.new();
Feedback
Your answer is correct.
Object Oriented Programming Principles , chapter two/instantiating object
a.
CAN.
b.
SPI.
c.
RS232.
d.
I2C.
Feedback
Your answer is incorrect.
Embedded systems
The correct answer is: RS232.
Question 25
Suppose an ISP owns the block of addresses of the form 131.210.16.0/21. Suppose it wants
to create four subnets from this block, with each block having the same number of IP
addresses. How many users the ISP ca serve on each of the four networks.
a.
510
b.
500
c.
515
d.
512
Feedback
Your answer is correct.
The original block of addresses 131.210.16.0/21 has 2^(32-21) = 2^11 = 2048 IP addresses.
Since we are creating 4 subnets, each subnet will have 2048/4 = 512 IP addresses.
However, 2 IP addresses from each subnet are reserved for the network address and the
broadcast address, so the number of host addresses that can be supported per subnet is
512 - 2 = 510.
Data Communication and Computer Networks
Network Layer
-IP addressing
-Subnetting
a.
A Comma (,)
b.
A Semicolon (;)
c.
A Slash (/)
d.
A Full stop(.)
Feedback
Your answer is correct.
cpp line statement ends with ;
Basic Elements, Syntax and Semantics of a high-level programming, CLO1
The correct answer is:
A Semicolon (;)
Question 27
The logic realized by the circuit shown in figure4 below:
figure 4
a.
F=AʘC
b.
F=A⊕C
c.
F=B⊕C
d.
F=A⊕B
Feedback
Your answer is incorrect.
Digital Logic Design Combinational logic/Multiplexors & Demultiplexer
The correct answer is:
F=A⊕C
Question 28
Which elements of electrical engineering cannot be analyzed using Ohm’s law?
a.
Capacitors
b.
Resistance
c.
Transistors
d.
Inductors
Feedback
Your answer is correct.
Ohm’s law cannot be used for unilateral networks as such networks only allow current flow in
one direction. Transistor forms a unilateral network. Thus, Ohm’s law cannot be used on
Transistors.
Basic laws (Ohms Law), CLO2
The correct answer is:
Transistors
Question 29
When a pop() operation is called on an empty queue, what is the condition called?
a.
Syntax Error
b.
Overflow
c.
Garbage Value
d.
Underflow
Feedback
Your answer is incorrect.
Data Structures and Algorithms, Chapter 3 List, Stackes and Queues
The correct answer is:
Underflow
Question 30
In the figure, Server B is attempting to contact Host A. Which statement correctly identify the
addressing that Server B will generate in the process?
Question 31
Determine the number of cycles in an AC signal make in 2 seconds if its frequency is 100
Hz?
a. 200
b. 100
c. 150
d. 50
Feedback
Your answer is correct.
In electrical engineering, the frequency represents the ratio of the number of cycles to the
total time. Since frequency is given as 100 Hz and the time is 2 sec thus a total of 200 cycles
will be made.
Basic concepts of Electricity (circuit variables and parameters),
a.
Cut-off region
b.
Active region
c.
Saturation region
d.
A and C
Feedback
Your answer is incorrect.
If the transistor is designed to operate in active region , the input signal to be amplified and
output will have linear relationship.
Applied Electronics I
BJT working principle and application
CLO2
The correct answer is: Active region
Question 33
From the given circuit calculate the node voltage V.
a. 4 V b. 3 V c. 2.5 V d. 2 V
Feedback
Your answer is incorrect.
4V
Question 34
a.
b.
c.
d.
a.
12230H
b.
22230H
c.
35360H
d.
25360H
Feedback
Your answer is incorrect.
25360H
Question 36
For circuit shown in fig 2d. Find VQ and ID .The diode is Silicon and assume its forward
resistance is zero.
a. 3.1V and11.55mA
Feedback
Your answer is incorrect.
since the parallel resistance are the same, hence the total current is divided equally . In
each resistor
Applied Electronics I
Semiconductor diodes and their applications.
CLO2
The correct answer is:
a. 2048
b. 10
c. 1000
d. 1024
Feedback
Your answer is incorrect.
If it takes 120ms to send the picture using a 100Mbps link, the picture size is given by
0.12 sec × 100 Mbps = 12 Mb
There are a total of 1200 × 1000 = 1,200,000 pixles in the picture. Thus each pixel has
12Mb / 1,200,000 = 10 bits/pixel
Therefore each pixel can represent 210 = 1024 colors
1024
Question 38
Given DS:[0500H]=1, DS:[0501H]=7, DS:[0502H]=3, DS:[0503H]=18, ES:[0500H]=1,
ES:[0501H]=0, DS:[0502H]=3, DS:[0503H]=4, SI=0500H and DI=0500H.
What are the contents of ES: [0501H] and DS: [0501H] after the execution of the following
code?
Mov CX,04H
CLD
REP MOVSB
a.
b.
d.
Feedback
Your answer is incorrect.
Feedback
Your answer is correct.
If the initial energy stored in the capacitor is zero, the equivalent circuit of the capacitor
reduces to an capacitor with impedance of 1/sc ohms.
Network transform representation and analysis-Analysis of 1st & 2nd order circuits, CLO1
The correct answer is
Question 40
What will be the output of the following C++ code?#include <iostream>
using namespace std;
int main() {
int i = 3;
int l = i / -2;
int k = i % -2;
cout << l << k ;
return 0;
a.
`-1 -1`
b.
`1 - 1`
c.
d.
`-1 1`
Feedback
Your answer is incorrect.
`-1 1`
Question 41
What does positive power in an electrical element indicate?
a.
Element is absorbing power
b.
Element may absorb or supply power
c.
Element is supplying power
d.
Element is neither absorbing nor supplying power
Feedback
Your answer is correct.
Power in an electrical element is the product of voltage and current. Positive power will be
established when both voltage and current are positive or both are negative. Positive power
will indicate that the element is absorbing power.
Circuit variables and parameters, CLO1
The correct answer is:
Element is absorbing power
Question 42
For the two-port network shown on the figure 1 below. Calculate the output impedance〖
𝑧〗_22?
a.
10 Ω
b.
30 Ω
c.
50 Ω
d.
20 Ω
Feedback
Your answer is incorrect.
Two port networks - Two port (Z,Y,h,ABCD) parameters, CLO1
The correct answer is:
30 Ω
Question 43
In p-n junction semiconductor materials ,the area in which where there is no charge carriers
is called
a.
Depletion region
b.
enhancement region
c.
space charge region
d.
A and C
Feedback
Your answer is correct.
Applied Electronics I
Basics of Semiconductor material theory
CLO1
Question 44
In the circuit shown in fig 5 , the transistor is designed as power amplifier. Determine which
class of amplifier is ?
a.
Class AB
b.
Class D
c.
Class A
d.
Class C
Feedback
Your answer is correct.
Applied Electronics I
Power amplifiers
CLO3
The correct answer is:
Class A
Question 45
From the given choices select the polynomial that satisfies the Hurwitz condition?
Feedback
Your answer is correct.
Question 46
A router connects three links (networks). How many of each of the following layers can the
router be involved with?
a.
1-Physical Layer, 1-Data Link Layer, 3-Network Layers
b.
3-Physical Layers, 3-Data Link Layers, 3-Network Layers
c.
2-Physical Layers, 2-Data Link Layers, 1-Network Layers
d.
3-Physical Layers, 3-Data Link Layers, 1-Network Layer
Feedback
Your answer is incorrect.
Router is a network layer device. Thus the three links connected to the router belong to the
same network layer. Each of them have their respective data link and physical layers.
Data Communication and Computer Networks
Network Models
-Protocol layers
CLO1
Question 47
Which of the following is a linear data structure?
a. AVL trees
b. Array
c. Graphs
d. Binary trees
Feedback
Your answer is incorrect.
Data Structures and Algorithms, ADT, Linked Lists
Question 48
The collection of different instructions that the processor can understand belongs to which
issue?
a. Computer Architecture
b. Computer Function
c. Instruction Format
d. Computer Organization
Feedback
Your answer is correct.
Computer Architecture and Organization, Chapter 1, architectural attributes.
The correct answer is:
Computer Architecture
Question 49
The elements of a linked list are stored
a. In a structure
b. In an array
c. Anywhere the compiler has space for them
d. In contiguous memory location
The elements of a linked list are stored in a contiguous memory location. Element in the list
is spread across the memory and are linked by the pointers in the Node.
Feedback
Your answer is correct.
Data Structures and Algorithms, Chapter 3 List, Stackes and Queues
The correct answer is:
In contiguous memory location
Question 50
Which of the following is correct about the power consumed by R1 and R2 connected in
series if the value of R1 is greater than R2?
a.
The relationship between the power consumed cannot be established
b.
R2 will consume more power
c.
R1 will consume more power
d.
R1 and R2 will consume the same power
Feedback
Your answer is correct.
The power can be expressed as P = V*I = I2*R . When two resistors are connected in series
the current flowing through the resistors is the same and thus, power consumed by the
larger resistor will be more.
Basic concepts of Electricity (Power and energy), CLO1
The correct answer is:
R1 will consume more power
Question 51
How can encapsulation be implemented in Java?
d. By using the private access modifier on class members and providing getter and
setter methods to access them.
By using the private access modifier on class members and providing getter and setter
methods to access them.
Feedback
Your answer is correct.
By using the private access modifier on class members and providing getter and setter
methods to access them.
Question 52
Why is Object-Oriented Programming (OOP) used?
Feedback
Your answer is correct.
a.
b.
c.
d.
Compilation Process and running programs: Compiling, Debugging and Linking, CLO1
The correct answer is:
a.
b.
c.
To allow a class to define multiple methods with the same name but different parameters.
d.
Chapter 5 polymorphism
The correct answer is:
a. 1001
b. 1110
c. 1101
d. 0000
Feedback
Your answer is incorrect.
1101
Question 56
A network function is given by (𝑠)=(2𝑠^4+16𝑠^2+18)/(𝑠^3+4𝑠). In order to design a network
for the given function it satisfies the test for
a.
b.
LC impedance function
c.
RC impedance function
d.
RL impedance function
Feedback
Your answer is incorrect.
LC impedance function
Question 57
Which of the following statements is true about the difference between an abstract class and
an interface in Java
Feedback
Your answer is incorrect.
Feedback
Your answer is correct.
KCL or Kirchhoff’s current law helps in finding the currents flowing in the circuit. KCL states
that the current entering a junction is equal to the current leaving a junction.
a. Y = I2
b. Y = I3
c. Y = I1
d. Y = I0
Feedback
Your answer is incorrect.
Y = I1
Question 60
The Nyquist band width of x (t) = 3 cos50πt + 10 sin300πt – cos100t is
a. 200 Hz
b. 300 Hz
c. 100Hz
d. 50 Hz
Feedback
Your answer is correct.
We know that Nyquist frequency is twice the maximum frequency, i.e. fs = 2 fm.
The maximum frequency present in the signal is ωm = 300 π or fm = 150 Hz. Therefore the
Nyquist frequency fs = 2 fm = 300 Hz.
Signals and Systems Analysis
Sampling and Quantization
CLo1
The correct answer is:
300 Hz
Question 61
When an intrinsic Silicon semiconductor is doped with a very small amount of Boron, which
charge carrier will be majority charge carrier ?
a.
Doping
b.
Holes
c.
Electrons
d.
B and C
Feedback
Your answer is correct.
Applied Electronics I
Basics of semiconductors
Clo1
The correct answer is:
Holes
Question 62
Identify the data structure which allows deletions at both ends of the list but insertion at only
one end.
a.
Priority queues
b.
Input restricted dequeue
c.
Output restricted dequeue
d.
Stack
Feedback
Your answer is incorrect.
Data Structures and Algorithms, Chapter 3 List, Stackes and Queues
The correct answer is:
Input restricted dequeue
Question 63
Which of the following is an example of physical device which adds the signals?
a. Subtractor
b. Audio mixer
c. Radio
d. Frequency divider
Feedback
Your answer is incorrect.
Audio mixer is a device which combines music and voice signals. It is given by
Y (t) = x1 (t) + x2 (t).
Signals and Systems Analysis , Signal applications
The correct answer is:
Audio mixer
Question 64
Given V1 = 20 sin (ω t + 60 o) and V2 = 60 cos (ω t - 10 o). Determine the phase angle
between the two sinusoids.
a. 20°
b. 40°
c. 30°
d. 10°
Feedback
Your answer is incorrect.
Steady State Single Phase AC Circuit Analysis, CLO2
The correct answer is:
20°
Question 65
We want to transmit characters in the word “GO” to an I/O device 1 character at a time.
Assume each memory word is 16 bits in length containing two characters and assume we do
the masking operation before the right shift operation. What should be the masking bits to
send character G?
a. 0000000011111111
b. 0000000000000000
c. 1111111100000000
d. 1111111111111111
Feedback
Your answer is incorrect.
Computer Architecture and Organization, Data Operations
The correct answer is:
1111111100000000
Question 66
The first processor that includes real-mode in the Intel microprocessor family was_______
a.
8085
b.
8086
c.
8088
d.
80286
Feedback
Your answer is incorrect.
Microcontrollers and Interfacing
The correct answer is:
80286
Question 67
Which one of the following systems is causal?
a.
y(n)=x(n+2)
b.
y(t)=x(t)+x(t-3)+x(t^2)
c.
y(t)=x(t-1)+x(t-2)
d.
y(t)=x(t-1)+x(t-2)
Feedback
Your answer is incorrect.
A causal system is one in which the output depends on the present or past values of the
input, not future. If it depends on future values then it is non-causal. For y(t)=x(t)+x(t-
3)+x(t^2), y(n)=x(n+2), and y(n)=x(2n^2), the output depends on future values i.e., x (t^2), x
(n + 2) and x (2n^2) respectively. Whereas in y(t)=x(t-1)+x(t-2), the output y(t) depends on
past values only i.e., x(t – 1) and x(t – 2).
Signal and Systems Analysis
LTI systems
CLo1
The correct answer is:
y(t)=x(t-1)+x(t-2)
Question 68
In speech processing system if a transistor based audio amplifier is used, which design
parameter doesn't affects performance of the amplifier ?
a.
signal type
b.
power gain
c.
frequency response
d.
B and C
Feedback
Your answer is incorrect.
The performance of amplifier depends on its frequency response, and its gain. If the
amplifier is forced to work beyond specified designed parameter the output signal will be
distorted and performance will decline. This can be tested using electronic design software
Applied Electronics I
multistage and power amplifiers
CLO4
The correct answer is:
signal type
Question 69
For the given admittance network function Y(s) choose the correct Cauer I realization.
(𝑆)=(3(𝑠+𝑧)(𝑠+4))/(𝑠(𝑠+3))
Feedback
Your answer is incorrect.
Synthesis of dp functions (one port networks)-Foster and Cauer Synthesis, CLO1
The correct answer is:
Question 70
A binary tree in which all its levels except the last, have maximum numbers of nodes, and all
the nodes in the last level have only one child it will be its left child. Name the tree.
a.
Threaded tree
b.
Full binary tree
c.
M-way search tree
d.
Complete binary tree
Complete binary tree is a tree in which all its levels except the last, have maximum numbers
of nodes, and all the nodes in the last level have only one child it will be its left child. Name
the tree.
Feedback
Your answer is correct.
Data Structures and Algorithms, Chapter 4: Trees
The correct answer is:
Complete binary tree
What is the ROC of the system function H(z) if the discrete time LTI system is BIBO stable?
a.
Doesn’t exist
b.
Entire z-plane, except at z=0
c.
Entire z-plane, except at z=∞
d.
Contain unit circle
Feedback
Your answer is incorrect.
A discrete time LTI is BIBO stable, if and only if its impulse response h(n) is absolutely
summable. Hence, we see that if the system is stable, then H(z) converges for z=e^(jω).
That is, for a stable discrete time LTI system, ROC of H(z) must contain the unit circle |z|=1.
Signal and Systems Analysis
Z-transform analysis
CLO1
The correct answer is:
Contain unit circle
Question 72
What is the time complexity of the following code? void fun(int n) {
int i, j, k, count=0;
for(i = n/2; i <= n; i++)
for(j = 1; j+n/2 <= n; j++)
for(k = 1; k <= n; k*2)
count++;
}
a. O(1)
b. O(n2log n)
c. O(log n)
d. O(n2)
Feedback
Your answer is incorrect.
The correct answer is:
O(n2log n)
Question 73
The type of systems which are characterized by input and the output quantized at certain
levels are called as
a. analog
b. Digital
c. continuous
d. discrete
Feedback
Your answer is incorrect.
Discrete systems have their input and output values restricted to enter some
quantized/discretized levels.
Signal and systems Analysis Classification of systems
The correct answer is:
discrete
Question 74
If (110)x = (132)4, then what is x?
a.
9
b.
5
c.
8
d.
4
Feedback
Your answer is correct.
Digital Logic Design
Number systems
CLO1
The correct answer is:
5
Question 75
The earliest deadline first scheduler is used in a given real-time operating system. Which one of
the following is true about the scheduler?
a.
It assigns priorities to tasks upon their arrival.
b.
It allows a higher priority task to preempt a lower priority one.
c.
c) If there are tasks with execution time of 1sec,2sec and 4sec, and period 8sec, 5sec and
10sec, they are schedulable under the earliest deadline first policy.
d.
All.
Feedback
Your answer is correct.
Embedded systems
The correct answer is: All.
Question 76
In BCD addition, when a 4-bit sum is invalid, we add _______ as a correction value.
a. 0110
b. 1111
c. 0000
d. 1001
Feedback
Your answer is incorrect.
Digital Logic design
Binary Codes
The correct answer is:
0110
Question 77
What is the value of X at the end of the following list?
a. X = (A x B + C x D) / (D – E x F)
b. X = (A + B × C + D) / (D – E × F)
c. X = (A x C + B x D) / (E – D x F)
d. X = (A + B × C) / (D – E × F)
Feedback
Your answer is correct.
Computer Architecture and Organization, Number of Addresses
The correct answer is:
X = (A x B + C x D) / (D – E x F)
Question 78
What will be the output of the following C++ code?#include <iostream>
using namespace std;
int main() {
int n ;
for (n = 5; n < 0; n--)
{
cout << n;
if (n == 3)
break;
}
a. 5432
b. 54
c. 53
d. 543
Feedback
Your answer is correct.
break out off loop at after n = 3 printed
for loop , break and continue statement, CLO5
The correct answer is:
543
Question 79
Constructing the impedance realization of the following network function term yields
(2𝐾_𝑖 𝑠)/(𝑠^2+𝜔_𝑖^2 )
Feedback
Your answer is correct.
(2𝐾_𝑖 𝑠)/(𝑠^2+𝜔_𝑖^2 )
is a parallel tank circuit with a capacitor of 1/(2𝐾_𝑖 )f in parallel with an inductance of
(2𝐾_𝑖)/(𝜔_𝑖^2 )h.
Synthesis of dp functions (one port networks) - LC Network Synthesis, CLO1
The correct answer is:
Question 80
Given the truth table below. Which one of the following is not the Boolean expression for Y?
a.
A + B'
b.
A + A'B'
c.
AB' + AB + A'B'
d.
A' + B
Feedback
Your answer is incorrect.
Digital Logic Design
Boolean Algebra
The correct answer is:
A' + B
Question 81
Assume the processor is executing an instruction at some address when it received an
interrupt signal from an I/O module. Which of the following need not be saved before the
processor starts to handle the interrupting routine?
a.
Cache memory contents
b.
Program Counter
c.
CPU registers
d.
PSW
Feedback
Your answer is incorrect.
Computer Architecture and Organization, Interrupt Processing
The correct answer is:
Cache memory contents
Question 82
What is the simplified SOP equation for the following K-Map?
a. A'C + AC'
b. BC' + A'B'C + AB'C
c. A'B + AB'
d. BC' + B'C
Feedback
Your answer is incorrect.
Digital Logic Design
K-Map simplification
The correct answer is:
BC' + B'C
Question 83
Which of the following is not the type of queue?
a.
Single ended queue
b.
Priority queue
c.
Circular queue
d.
Ordinary queue
Feedback
Your answer is incorrect.
Data Structures and Algorithms, ADT, Queue
Question 84
Let the memory locations with physical addresses 20500H, 20502H, 30500H and 30502H
hold values 16H,15H, 08H and 07H respectively. Also, DS=2000H and CS=3000H. Then,
what is the contents of AX, CF, ZF and AF after the execution of the following code
fragment?
MOV AX, 0
MOV AL,[0500H]
MOV BL,[0502H]
ADD AL,BL
DAA
a.
The default gateway address is incorrect on the station.
b.
The IP address is incorrect on interface E0 of the router.
c.
The router is malfunctioning.
d.
The IP address on the station is incorrect.
Feedback
Your answer is incorrect.
The IP address of the station and the gateway are not in the same network. Since the
address of the gateway is correct on the station, it is most likely the IP station is incorrect.
Data Communication and Computer Networks
Network Layer
-IP addressing
CLO2
The correct answer is:
The default gateway address is incorrect on the station.
Question 86
Which of the following is the correct syntax to define an array?
a. n2/2
b. n(n+1)/2
c. n
d. n(n-1)/2
Feedback
Your answer is incorrect.
Data Structures and Algorithms, Chapter 9: Graph algorithms
The correct answer is: n(n-1)/2
Question 88
Which one of the following is not true about the Harvard-architecture?
Question 89
Which of the following is an advantage of encapsulation in Java?
Feedback
Your answer is incorrect.
Synthesis of dp functions (one port networks), CLO1
The correct answer is:
Question 91
Which of the following is the broadcast address for a Class B network ID using the default
subnet mask?
a. 172.255.255.255
b. 255.255.255.255
c. 172.16.255.255
d. 172.16.10.255
Feedback
Your answer is incorrect.
The default subnet mask for a Class B network is 255.255.0.0. The network ID for a Class B
network takes up the first two octets (16 bits) and the remaining two octets (16 bits) are used
for host addressing.
The broadcast address is the address at which all hosts on the network can receive a
message simultaneously. To calculate the broadcast address, we set all host bits to 1s. For
a Class B network, the host bits are in the last two octets (16 bits).
Therefore, the broadcast address for a Class B network with a default subnet mask would be
172.16.255.255.
Data Communication and Computer Networks
Network Layer
-Subnetting
CLO2
a.
By creating multiple objects of the same class.
b.
By using the final keyword on a method.
c.
By using the static keyword on a method.
d.
By overriding a method in a subclass.
Feedback
Your answer is incorrect.
Object Oriented Programming Principles, Chapter 5 polymorphism
The correct answer is:
By overriding a method in a subclass.
Question 93
Find the Z-transform of an u(n);a>0.
a. z/(z+a)
b. 1/(1−az)
c. z/(z−a)
d. 1/(1+az)
Feedback
Your answer is incorrect.
Substitute to z-transform equation
Signal and Systems Analysis
Z-transform analysis
CLo1
The correct answer is:
z/(z−a)
Question 94
Using USART module
Question 95
Interfaces between the computer and peripherals belongs to which of the following?
a. Computer Functions
b. Computer Organization
c. Computer Programming
d. Computer Architecture
Feedback
Your answer is incorrect.
Question 96
Which one of the following is not the function of the Bus Interface unit(BIU) of Intel-8086?
Feedback
Your answer is incorrect.
Microcontrollers and Interfacing
The correct answer is:
Determining the type of operation in a given instruction
Question 97
Which one of the following Intel IC is a coprocessor?
a. 8087
b. 8085
c. 80286
d. 8088
Feedback
Your answer is incorrect.
Microcontrollers and Interfacing
The correct answer is:
8087
Question 98
Which one of the following design activity can be used for mapping operations into
hardware components and signals?
a. Scheduling
b. API programming
c. High-level transformation
d. Hardware-software partitioning
Feedback
Your answer is incorrect.
Embedded systems
The correct answer is: Hardware-software partitioning
Question 99
Question text
Which one of the following design models considers both hardware and software during an
embedded system development?
a. HDL-based design
b. RTOS design
c. Platform-based design
d. Hardware-software co-design
Feedback
Your answer is incorrect.
Embedded systems
The correct answer is:
Hardware-software co-design
Question 100
One of the following component is not basically contained in a microcontroller IC.
a. EEPROM.
b. I/O module.
c. Timer/counter module.
d. DMA module.
Feedback
Your answer is incorrect.
Embedded systems
The correct answer is: DMA module.