Professional Documents
Culture Documents
Waukesha Cherry Burrell Sshe Votator Origin Series Bro GB
Waukesha Cherry Burrell Sshe Votator Origin Series Bro GB
ORIGIN SERIES
Scraped Surface Heat Exchanger
2
SIMPLE.
The Votator® Origin Series is designed to provide powerful
results for light duty, low-to-medium viscosity applications
VERSATILE.
that demand high productivity. Its modular design enables
flexible adaptation to your specific processing needs.
DEPENDABLE.
To enable process customization with either stainless steel
or duplex stainless steel, there are three shaft diameters
available, with a self-loading hinged scraper blade as
a standard offering and a floating flat blade for various
products including particulates. Additional options include
rotor heating, insulation, and double mechanical seals.
Heating/cooling media
Depending on the application and available utilities the
Votator® Origin Series is suitable for a range of media
Combining knowledge including: steam, hot water, glycol, brine, cold water.
from three experienced
brands to develop an Wide range of configurations
optimized light duty The Votator® Origin Series is designed for use at 14 to
302°F (-10 to 150°C) with a design pressure of up to
scraped surface heat
290 psi (20 bar) in the standard version and comes
exchanger.
optional in a 362 psi (25 bar) version.
Dairy
• Cream Cheese
• Milk Concentrates
• Quark
• Yogurt
• Baby Food
TYPICAL Bakery
Cosmetics
• Facial cremes
• Hair wax
• Gels
4
Single and double mechanical cartridge Unique scraper blade designs including floating
seal options for various process and hygienic or hinged designs for efficient blade positioning.
requirements.
5
Heat exchange surface / cyl. 2.1 ft2 (0.2 m2) 4.3 ft2 (0.4 m2) 8.6 ft2 (0.8 m2)
Inner cyl. diameter 5.26” (134 mm) 5.26” (134 mm) 5.26” (134 mm)
PRODUCT
Product volume - 2.84” (72 mm) shaft 1.32 gal (5.0 ltr) 2.64 gal (1 0 ltr) 5.26 gal (19.9 ltr)
3.8” (97 mm) shaft 1.11 gal (4.2 ltr) 1.92 gal (7.3 ltr) 3.56 gal (13.5 ltr)
4.5” (112 mm) shaft 0.56 gal (2.1 ltr) 1.11 gal (4.2 ltr) 2.22 gal (8.4 ltr)
MEDIA
50 Hz / 400V motor - power 3.0 hp (2.2 kW) 4.0 hp (3 kW) 5.4 hp (4 kW)
Rated shaft torque 88 ft-lb (119 Nm) 76 ft-lb (103 Nm) 199 ft-lb (270 Nm)
Rated shaft torque 73 ft-lb (99 Nm) 64 ft-lb (87 Nm) 144 ft-lb (195 Nm)
*Additional output speeds are available upon request. Change in output speed will also impact the torque rating.
CERTIFICATIONS*
*The equipment is engineered in accordance with the CE Pressure Equipment Directive, and is exempt from the requirements of
ASME Section VIII, Unfired Pressure Vessels due to it’s diameter. The design is to EHEDG standards, but a certificate was not pursued.
ADAPTABILITY
Vertical Frames
Available for 1 to 4 cylinders
Horizontal Frames
Available for 1 to 6 cylinders
SPX FLOW offers a broad range of genuine spare parts effective, and optimized solutions for any equipment-
and service plans that extend the lifecycle of our products. based issue. Featuring detailed equipment service audits,
The SPX FLOW Genuine Spare Parts Service includes this parts service can predict and prevent productivity
access to our full engineering capabilities and regular loss, unexpected downtime, and reduced process output.
equipment service audits. Our experienced team has Additionally, SPX FLOW offers certification, safety and
the engineering expertise necessary to ensure reliable, training designed for maximum uptime.