Professional Documents
Culture Documents
Instructions For Use SOL-S02
Instructions For Use SOL-S02
SOL – S02
Use:
2 Mounting:
Insert a square nut [3] into the groove of the
mounting profile [5]. Insert the bolt [1] through the
hole of the end module clamp [2] and screw it into
the nut [3] with the prescribed torque of 5 Nm.
WARNING!
3 Depending on the height of the module, it is
necessary to select the appropriate clamp!
5
4
HERMI, d.o.o., Trnoveljska cesta 15, 3000 Celje, Slovenija www.hermi.si info@hermi.si