This document is a quality control report from a CMM machine. It summarizes the measurement of diameters and coaxiality of parts from a disc brake CNC program on January 4, 2024. The report lists the actual and nominal measurements for diameters K-01 through K-03 and J-01 through J-03, and shows that all diameters were within the specified tolerances. It also measures coaxiality1 at 0.2092 which is within the allowed tolerance.
This document is a quality control report from a CMM machine. It summarizes the measurement of diameters and coaxiality of parts from a disc brake CNC program on January 4, 2024. The report lists the actual and nominal measurements for diameters K-01 through K-03 and J-01 through J-03, and shows that all diameters were within the specified tolerances. It also measures coaxiality1 at 0.2092 which is within the allowed tolerance.
This document is a quality control report from a CMM machine. It summarizes the measurement of diameters and coaxiality of parts from a disc brake CNC program on January 4, 2024. The report lists the actual and nominal measurements for diameters K-01 through K-03 and J-01 through J-03, and shows that all diameters were within the specified tolerances. It also measures coaxiality1 at 0.2092 which is within the allowed tolerance.
Ather Front Disc CNC Program January 4, 2024 Drawing No. Time Order 9:37:29 PM Ather FR Disc Operator CMM Incremental Part Number Master C32Bit 23-12-2023 A SHIFT NO-01
Name ID Aktual Nominal pos Tol neg Tol Diff <--|-->
Diameter K-01 D 41.9518 42.0000 -0.0170 -0.0420 -0.0482 -0.0062 Diameter K-02 D 41.9576 42.0000 -0.0170 -0.0420 -0.0424 -0.0004 Diameter K-03 D 41.9603 42.0000 -0.0170 -0.0420 -0.0397 ----| Diameter J-01 D 41.9603 42.0000 -0.0170 -0.0420 -0.0397 ----| Diameter J-02 D 41.9605 42.0000 -0.0170 -0.0420 -0.0395 ----| Diameter J-03 D 41.9605 42.0000 -0.0170 -0.0420 -0.0395 ----| Coaxiality1 Coa 0.2092 0.0000 0.2500 0.2092 |----