Professional Documents
Culture Documents
كابينة حريق شركة سكاى
كابينة حريق شركة سكاى
SKY cabinets are designed to accommodate fire hose reel and firefighting equipment, fire
cabinets are generally fabricated from carbon steel or stainless-steel material are available SKY single jacket fire hose consists of 100% polyester plain-woven synthetic and natural
upon request. rubber linings. This fire hose has very good resistance to ageing and abrasion. The light fire
hose is suitable for normal situation.
From the early step of preparing the material, fabrication, up until the surface preparation and
powder coating, the quality of craftsmanship and finishes are meticulously planned and The single jacket hose made of high tenacity polyester
carried out. staple and polyester filaments. Lining is natural rubber. Jacket is plain. There is a special
adhesion between the jacket and the rubber.
The carbon steel cabinets' typical finishes are an oven-baked "Red" epoxy/polyester powder
coating. Cabinets made of stainless-steel Type 304 or 316 are available in brushed or mirror
finishes. ● UL Listed.
●Conforming to BS 6391:2009 Type 1
●Premium quality Rubber lined Single Jacket Hose.
● CE Certificate to EN671-1, LPCB approved. ●Circular woven Jacket made up of 100% Polyester yarn.
● Elegant and compact design. ●High Quality Synthetic EPDM Rubber Lining.
● Robust construction. ●Light and Flexible, Sea Water and Weather Resistant, Ageing and Ozone
● Easy and flexible installation. Resistant.
● Reliable performance with minimum maintenance.
● Side plates 1mm cold rolled steel, RAL3000
polyester epoxy powder coating.
● Rotary operated Jet/Spray nozzle.
● Max working pressure 12 bar, Test pressure 18bar. SKYEG-D FIRE HOSE
OPERATING INSTRUCTIONS
1- Pull out the hose and the water flow will start within 3 1- Open the main valve fully.
rotations. 2- Pull out the hose.
2- Open nozzle, adjust to spray or jet as required. 3- Open nozzle, adjust to spray or jet as required.
3- Aim nozzle at base of fire. 4- Aim nozzle at base of fire.
4- After use, close the nozzle and rewind the hose, 5- After use, close the nozzle, turn off the main valve, rewind the
ensuring that it is properly wound around the hose reel (not hose, ensuring that it is properly wound around the hose reel (not
overlapping side plates). Open the nozzle to drain water overlapping the side plates). Open the nozzle to drain water from
from the hose and then close the nozzle on completion. the hose and then close the nozzle on completion. The Double Coating NBR Fire hose are manufactured and approved to UL Listed/BSI.
Compliance to this very stringent standard ensures excellent durability and performance at all
time. One step manufacturing NBR/PVC rubber lined.
MATERIAL SPECIFICATION
Sr. 1 2 3 4 5 6 7 8 9 10
Description Nozzle Washer Pipe Washer O-Ring Nut Handle Screw Gasket O-Ring
MATERIAL SPECIFICATION
Sr. 11 12 13 14 15 16 17 18
Description Washer O-Ring Washer Male coupling Body Ball assembly Bonnet Washer Sr. Description Material
MATERIAL SPECIFICATION
SKY can provide another type of couplings to suits and meets all your needs, which is “Aluminum Alloy
Expansion Ring Instantaneous Hose Couplings”.
● ·Expansion rings made from seamless soft anneal brass tubing, for
maximum expansion without danger of breaking.
·● ·Permanent roll stamp.
·● ·Lathe cut synthetic or EPDM gaskets included with each coupling.
·● ·Working pressure of 20bar.
·● ·Connections and Dimensions conforms to BS336.
·● ·Instantaneous Hose Coupling.
61 CERTIFICATE
CERTIFICATE
8/8/23, 4:19 PM SKYEG-S | UL Product iQ
Model SKYEG-S
File Number: EX29082
COMPANY
MODEL INFO
SKYEG-S
Single-jacketed
HOSE INFORMATION
Hose Size, in. (mm) Service Test Pressure, psig (kPa) Ratings Comments
1-1/2 (38) 250 (1725) Ozone resistant Lining (EPDM) Jacket (Woven Polyester)
2-1/2 (65) 250 (1725) Ozone resistant Lining (EPDM) Jacket (Woven Polyester)
Hose Size, in. (mm) Exposure Duration Avg Leakage Rate @ 150 psi Max Leakage Rate @ 150 psi
Hose Size, in. Exposure Avg Leakage Rate @ Max Leakage Rate @ 150
Color/Marking
(mm) Duration 150psi psi
https://iq.ulprospector.com/en/profile?e=6079047 1/2
8/8/23, 4:19 PM SKYEG-S | UL Product iQ
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL Solutions' Follow - Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL
Solutions' Follow - Up Service. Always look for the Mark on the product.
UL Solutions permits the reproduction of the material contained in Product iQ subject to the following conditions: 1. The Guide Information,
Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading manner,
without any manipulation of the data (or drawings). 2. The statement "Reprinted from Product iQ with permission from UL Solutions" must appear
adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "©2023 UL LLC."
https://iq.ulprospector.com/en/profile?e=6079047 2/2
8/8/23, 4:20 PM SKYEG-D | UL Product iQ
Model SKYEG-D
File Number: EX29082
COMPANY
MODEL INFO
SKYEG-D
Single-jacketed
HOSE INFORMATION
Hose Size, in. (mm) Exposure Duration Avg Leakage Rate @ 150 psi Max Leakage Rate @ 150 psi
Hose Size, in. Exposure Avg Leakage Rate @ Max Leakage Rate @ 150
Color/Marking
(mm) Duration 150psi psi
1-1/2 (38) Reddish brown 1 min 44 sec > 20 gpm > 20 gpm
https://iq.ulprospector.com/en/profile?e=6078762 1/2
8/8/23, 4:20 PM SKYEG-D | UL Product iQ
Hose Size, in. Exposure Avg Leakage Rate @ Max Leakage Rate @ 150
Color/Marking
(mm) Duration 150psi psi
The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured
under UL Solutions' Follow - Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL
Solutions' Follow - Up Service. Always look for the Mark on the product.
UL Solutions permits the reproduction of the material contained in Product iQ subject to the following conditions: 1. The Guide Information,
Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading manner,
without any manipulation of the data (or drawings). 2. The statement "Reprinted from Product iQ with permission from UL Solutions" must appear
adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "©2023 UL LLC."
https://iq.ulprospector.com/en/profile?e=6078762 2/2
8/8/23, 4:20 PM SKYEG-DJ | UL Product iQ
Model SKYEG-DJ
File Number: EX29082
COMPANY
MODEL INFO
SKYEG-DJ
Double-jacketed
HOSE INFORMATION
Hose Size, in. (mm) Service Test Pressure, psig (kPa) Ratings Comments
1-1/2 (38) 300 (2070) Ozone resistant Lining (EPDM) Jackets (Woven Polyester)
2-1/2 (65) 300 (2070) Ozone resistant Lining (EPDM) Jackets (Woven Polyester)
Hose Size, in. (mm) Exposure Duration Avg Leakage Rate @ 150 psi Max Leakage Rate @ 150 psi
Hose Size, in. Exposure Avg Leakage Rate @ Max Leakage Rate @ 150
Color/Marking
(mm) Duration 150psi psi
https://iq.ulprospector.com/en/profile?e=6079429 1/2
Certificate of Product Approval
Certificate Number: 1153Va Issue: 01
is certified by BRE Global Ltd. and is authorised to use the LPCB mark in association with the product(s) listed
in this certificate and appendix having complied with the requirement(s) of the standards as detailed below:
Products Standards
‘SKY’ Fire Hose Reels EN 671-1:2012
(Refer to attached appendix for details) Fixed firefighting systems. Hose systems. Hose reels
with semi-rigid hose
This certificate and appendix is maintained and held in force through regular surveillance activities
This certificate and appendix remains the property of BRE Global Ltd. and is issued
subject to terms and conditions (for details visit www.redbooklive.com/terms).
To check the validity of this certificate and appendix please visit
www.redbooklive.com/check, scan the QR tag or contact us.
BRE Global Ltd, Watford, WD25 9XX
T: +44 (0)333 321 8811 E: enquiries@breglobal.com
LPCB is a Registered Trademark of the Building Research Establishment Ltd.
This certificate and appendix is maintained and held in force through regular surveillance activities
This certificate and appendix remains the property of BRE Global Ltd. and is issued
subject to terms and conditions (for details visit www.redbooklive.com/terms).
To check the validity of this certificate and appendix please visit
www.redbooklive.com/check, scan the QR tag or contact us.
BRE Global Ltd, Watford, WD25 9XX
T: +44 (0)333 321 8811 E: enquiries@breglobal.com
LPCB is a Registered Trademark of the Building Research Establishment Ltd.
is certified by BRE Global Ltd. and is authorised to use the LPCB mark in association with the product(s) listed
in this certificate and appendix having complied with the requirements of the standard(s) detailed below:
Products Standards
‘SKY’ Hand-Held Branchpipes EN 15182-1:2019
(Refer to attached appendix for details) Hand-held branchpipes for fire service use – Part 1:
Common requirements
EN 15182-3:2019
Hand-held branchpipes for fire service use – Part 3:
Smooth bore jet and/or one fixed spray angle
branchpipes PN16
This certificate and appendix is maintained and held in force through regular surveillance activities
This certificate and appendix remains the property of BRE Global Ltd. and is issued
subject to terms and conditions (for details visit www.redbooklive.com/terms).
To check the validity of this certificate and appendix please visit
www.redbooklive.com/check, scan the QR tag or contact us.
BRE Global Ltd, Watford, WD25 9XX
T: +44 (0)333 321 8811 E: enquiries@breglobal.com
LPCB is a Registered Trademark of the Building Research Establishment Ltd.
13mm smooth bore, straight jet and one fixed spray jet, lever operated,
SKYEG-16A aluminium body, plastics covered aluminium lever and shaft gripping device, 1153Vc/03
plastics obturator, BS336 male inlet, hand-held branchpipe
13mm smooth bore, straight jet and one fixed spray jet, lever operated,
SKYEG-16P aluminium body, plastics covered aluminium lever, plastics shaft gripping device 1153Vc/06
and obturator, BS336 male inlet, hand-held branchpipe
This certificate and appendix is maintained and held in force through regular surveillance activities
This certificate and appendix remains the property of BRE Global Ltd. and is issued
subject to terms and conditions (for details visit www.redbooklive.com/terms).
To check the validity of this certificate and appendix please visit
www.redbooklive.com/check, scan the QR tag or contact us.
BRE Global Ltd, Watford, WD25 9XX
T: +44 (0)333 321 8811 E: enquiries@breglobal.com
LPCB is a Registered Trademark of the Building Research Establishment Ltd.
In respect of:
BS 336
Fire hose couplings and ancillary equipment
This issues the right and licence to use the Kitemark in accordance with the Kitemark Terms and Conditions
governing the use of the Kitemark, as may be updated from time to time by BSI Assurance UK Ltd (the "Conditions").
All defined terms in this Certificate shall have the same meaning as in the Conditions.
The use of the Kitemark is authorized in respect of the Product(s) detailed on this Certificate provided at or from the
above address.
For and on behalf of BSI: Shahm Barhom, Group Product Certification Director
Page: 1 of 2
Page: 1 of 2
This certificate has been issued by and remains the property of BSI Assurance UK Ltd, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP, United
Kingdom and should be returned immediately upon request.
To check its validity telephone +44 (0) 345 080 9000. An electronic certificate can be authenticated online.
BSI Assurance UK Limited, registered in England under number 7805321 at 389 Chiswick High Road, London W4 4AL, UK.
A member of BSI Group of Companies.
Kitemark™ Certificate
No. KM 791028
SKYEG – 1.75AC 2½” aluminium delivery hose coupling with a 1¾” ribbed tail
SKYEG – 1.5AC 2½” aluminium delivery hose coupling with a 1½” ribbed tail
SKYEG – 2.75CC 2½” copper alloy delivery hose coupling with a 2¾” ribbed tail
SKYEG – 2.5CC 2½” copper alloy delivery hose coupling with a 2½” ribbed tail
SKYEG – 2CC 2½” copper alloy delivery hose coupling with a 2” ribbed tail
SKYEG – 1.75CC 2½” copper alloy delivery hose coupling with a 1¾” ribbed tail
SKEG – 1.5CC 2½” copper alloy delivery hose coupling with a 1½” ribbed tail
SKYEG – 2.75CC-01 2½” copper alloy delivery hose coupling with a 2¾” ribbed tail
SKYEG – 2.5CC-02 2½” copper alloy delivery hose coupling with a 2½” ribbed tail
SKYEG – 2CC-03 2½” copper alloy delivery hose coupling with a 2” ribbed tail
SKYEG – 1.75CC-04 2½” copper alloy delivery hose coupling with a 1¾” ribbed tail
SKEG – 1.5CC-05 2½” copper alloy delivery hose coupling with a 1½” ribbed tail
Products are certified to BS 336:2010 - Fire hose couplings and ancillary equipment.
Page: 2 of 2
This certificate has been issued by and remains the property of BSI Assurance UK Ltd, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP, United
Kingdom and should be returned immediately upon request.
To check its validity telephone +44 (0) 345 080 9000. An electronic certificate can be authenticated online.
BSI Assurance UK Limited, registered in England under number 7805321 at 389 Chiswick High Road, London W4 4AL, UK.
A member of BSI Group of Companies.
Kitemark™ Certificate
Kitemark™ Certificate
No. KM 791029
In respect of:
BS 6391
Non-percolating lay-flat delivery hose
This issues the right and licence to use the Kitemark in accordance with the Kitemark Terms and Conditions
governing the use of the Kitemark, as may be updated from time to time by BSI Assurance UK Ltd (the "Conditions").
All defined terms in this Certificate shall have the same meaning as in the Conditions.
The use of the Kitemark is authorized in respect of the Product(s) detailed on this Certificate provided at or from the
above address.
For and on behalf of BSI: Shahm Barhom, Group Product Certification Director
Page: 1 of 2
Page: 1 of 2
This certificate has been issued by and remains the property of BSI Assurance UK Ltd, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP, United
Kingdom and should be returned immediately upon request.
To check its validity telephone +44 (0) 345 080 9000. An electronic certificate can be authenticated online.
BSI Assurance UK Limited, registered in England under number 7805321 at 389 Chiswick High Road, London W4 4AL, UK.
A member of BSI Group of Companies.
Kitemark™ Certificate
No. KM 791029
Page: 2 of 2
This certificate has been issued by and remains the property of BSI Assurance UK Ltd, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP, United
Kingdom and should be returned immediately upon request.
To check its validity telephone +44 (0) 345 080 9000. An electronic certificate can be authenticated online.
BSI Assurance UK Limited, registered in England under number 7805321 at 389 Chiswick High Road, London W4 4AL, UK.
A member of BSI Group of Companies.