Download as pdf or txt
Download as pdf or txt
You are on page 1of 10

EXPERT ADVISOR DSC PRICE ACTION

EURUSD TIME M5
Introduction
Link to buy the Expert directl:

https://www.mql5.com/en/market/product/50843

“The financial market requires a lot of patience and attention. So, please read the entire manual carefully and patiently ”

Welcome to the best Robot for those who want to make a profit in the financial market. A Robot for you to manage your capital
for your entire life. Our Robot will be in constant evolution with new configurations, looking for a bigger profit with a lower risk.

Currently DSC Price Action is already used by 2 fund managers in Europe and used in my fund management through the
diversification of capital among the various recommended configurations.

The DSC PRICE ACTION EURUSD TIME M5 robot is a Robot created to operate on the 5-minute chart using Meta Trader 5.

You can trade it through a Meta Trader 5 account in Hedge or Netting mode.

If you don't have an account with any broker yet, choose a broker below to trade:

XM (MT5 Hedge): https://tinyurl.com/3skp7wb3

ICMarkets (MT5 Hedge): https://tinyurl.com/y7yjbtfz

FBS (MT5 Hedge): https://tinyurl.com/5ftaha7c

Exness (MT5 Hedge): https://tinyurl.com/4mf4manm

Alpari (MT5 Netting): https://tinyurl.com/kkjvwcrp

Currently, it is certainly one of the best products on the market, see our results below on the live site:

https://www.mql5.com/en/signals/author/dcansi

How is capital management done using DSC Price Action by market professionals?
Financial market professionals never risk a lot of money on any strategy. As much as a strategy can make a lot of money, it has
risk. As much as a strategy may earn little and have a low capital draw, it has risks. This is the secret of this market. Never risk
capital you cannot afford to lose.

Our professional management is done by putting a small capital initially mainly in setups (SET's) that earn more. Thus, the
manager does not run the risk of exposing all his capital and maintains a correct risk management.

Let's put an example. The user has a total capital of U $ 10,000.00.

Then he creates 2 Meta Trader 5 accounts with the lowest spread rate and commission available at the brokerage to get
started.

In account 1 he puts $100.00 (1%) and loads the Robot on EURUSD on the 5 minute chart using SET 16 with the aim of doubling
the capital every 1 or 2 months.

In account 2 he puts $100.00 (1%) and loads the Robot on EURUSD on the 5-minute chart using SET 21 with the aim of doubling
the capital every 1 or 2 months.
That way we start first without taking any chances. It's ideal for anyone starting out on a strategy, robot or signal.

Once we make a 100% profit on one of these accounts, we withdraw the profit and we are risk free. We can over time increase
the capital in the accounts.

Ideally, we are always risk free on our accounts. We make withdrawals whenever possible. Anyone who has been in this market
for a long time knows that the market changes and that there is nothing that if we simulate in the entire history of an asset, it
can have a low drawdown and a good return. That's why the best result is obtained using what is most profitable today and
always trying to be risk-free.

But what if I start with 1% capital in more risky setups and lose the capital? In this case we had a low loss, we are calmly
controlling our capital and we can wait a few days and start all over again with 1% or doubling the capital to 2% for those who
want to recover faster.

Here are the signals using our robot. In all accounts we work risk-free as we have already withdrawn more capital than we have
placed.

https://www.mql5.com/pt/signals/author/dcansi

How does DSC Price Action work?

DSC Price Action operates on the 5-minute chart and works by combining 4 value matrices that show where the price is most
likely to arrive and return a little bit (It looks for a combination of points only by price starting from a central point where the
price arrives and does a little pull back). With that he only works with pending orders. That is, the Robot places sales orders and
purchase orders at certain points on the chart. And wait for the price to get there and take the orders.

The DSC Price Action Robot also becomes an excellent tool for showing points where the market is likely to reverse. Often
making purchases at the minimum of one movement and sales are at the maximum of one movement.

What are the parameters of DSC Price Action?

DSC PRICE ACTION EURUSD TIME M5 DSC PRICE ACTION EURUSD TIME M5

Settings diogo.cansi (Write here diogo.cansi to release all features)

Magic Number 123 (Choose the Robot's magic number)

Show Information True (whether you want to see Robot information on the screen or not)

Risk Lot [5 to 250] 100 (The lower the value, the greater the risk as the larger the batch size of the
operations will be). Use values between 5 to 250.

MATRIX 1

RISK 1 MATRIX 1 Risk 1 of Matrix 1. Use values from 0 to 4

RISK 2 MATRIX 1 Matrix Risk 2 1. Use values from 0 to 4

RISK 3 MATRIX 1 Matrix Risk 3 1. Use values from 0 to 4

MATRIX 2

RISK 1 MATRIX 2 Risk 1 of Matrix 2. Use values from 0 to 4

RISK 2 MATRIX 2 Risk 2 of Matrix 2. Use values from 0 to 4


RISK 3 MATRIX 2 Risk 3 of Matrix 2. Use values from 0 to 4

MATRIX 3

RISK 1 MATRIX 3 Risk 1 of Matrix 3. Use values from 0 to 4

RISK 2 MATRIX 3 Risk 2 of Matrix 3. Use values from 0 to 4

RISK 3 MATRIX 3 Risk 3 of Matrix 3. Use values from 0 to 4

MATRIX 4

RISK 1 MATRIX 4 Risk 1 of Matrix 4. Use values from 0 to 4

RISK 2 MATRIX 4 Risk 2 of Matrix 4. Use values from 0 to 4

RISK 3 MATRIX 4 Risk 3 of Matrix 4. Use values from 0 to 4

Accumulated Risk

MAX RISK Maximum risk accumulated among all matrices (Use values from 4 to 32)

Distance Matrix Vector 1

DISTANCE 1 MATRIX 1 Here the Robot places orders on the graph at this distance from the central axis of
the matrices. In other words, in the EURUSD that is currently quoted at 1.23000,
we work with values between 0.0005 and 0.0005 to 0.02. (We look for points with
a distance between 50 pipettes to 2000 pipettes).

DISTANCE 2 MATRIX 1 Same as previous item. Distance from the central axis of the dies.

DISTANCE 3 MATRIX 1 Same as previous item. Distance from the central axis of the dies.

DISTANCE 1 MATRIX 2 Same as previous item. Distance from the central axis of the dies.

DISTANCE 2 MATRIX 2 Same as previous item. Distance from the central axis of the dies.

DISTANCE 3 MATRIX 2 Same as previous item. Distance from the central axis of the dies.

Distance Matrix Vector 2

DISTANCE 1 MATRIX 3 Here the Robot places orders on the graph at this distance from the central axis of
the matrices. In other words, in the EURUSD that is currently quoted at 1.23000,
we work with values between 0.0005 and 0.0005 to 0.02. (We look for points with
a distance between 50 pipettes to 2000 pipettes).

DISTANCE 2 MATRIX 3 Same as previous item. Distance from the central axis of the dies.

DISTANCE 3 MATRIX 3 Same as previous item. Distance from the central axis of the dies.

DISTANCE 1 MATRIX 4 Same as previous item. Distance from the central axis of the dies.

DISTANCE 2 MATRIX 4 Same as previous item. Distance from the central axis of the dies.

DISTANCE 3 MATRIX 4 Same as previous item. Distance from the central axis of the dies.

IMA PRICE MATRIX 1-2 [3-9] Moving average to create a central median between matrix 1 and 2. Use values
from 3 to 9 for best result.
IMA PRICE MATRIX 2-3 [1-4] Moving average to create a central median between matrix 2 and 3. Use values
from 1 to 4 for best result.

IMA PRICE MATRIX 1-3 [1-4] Moving average to create a central median between matrix 1 and 3. Use values
from 1 to 4 for the best result.

IMA METHOD Method of calculating moving averages.

IMA PRICE Calculation method using either the closing price or the opening price of the
candle for the central median.

MATRIX 1 POWER [2.5 to 30] Relevance we give to the points found in the graph of each matrix. Use value
between 2.5 to 30.

MATRIX 2 POWER [2.5 to 30] Relevance we give to the points found in the graph of each matrix. Use value
between 2.5 to 30.

MATRIX 3 POWER [2.5 to 30] Relevance we give to the points found in the graph of each matrix. Use value
between 2.5 to 30.

MATRIX 4 POWER [2.5 to 30] Relevance we give to the points found in the graph of each matrix. Use value
between 2.5 to 30.

USE MACD CHANNEL FILTER False / true. Here we select if we use a MACD filter to discard results when the
macd is very close to zero.

MACD FILTER CALCULATION 0.004 (See at the end of the manual how this variable is used).

LIMIT PANIC 1 [-2 to -40] -two. Here we say that if the drawdown reaches -2% of the total capital of the
account, the Robot accepts to leave the open position with the profit of the item
below.

GAIN PANIC 1 [-5 to 1] -1. Here we say how much profit or loss we accept in the position to leave if the
downgrade we put above has been reached. That is, in this example, if the open
position reaches -2% of the capital, the capital returns to -1% it closes that
position or the open positions in the account.

LIMIT PANIC 2 [-10 to -50] -25. Here we say that if the drawdown reaches -25% of the total capital of the
account, the Robot accepts to leave the open position with the profit of the item
below.

GAIN PANIC 2 [-20 to -5] -4. Here we say how much profit or loss we accept in the position to leave if the
downgrade we put above has been reached. That is, in this example, if the open
position reaches -25% of the capital, the capital returns up to -4% it closes that
position or the open positions in the account.

LIMIT PANIC 3 [-20 to -90] -30. Here we say that if the drawdown reaches -30% of the total capital of the
account, the Robot accepts to leave the open position with the profit of the item
below.

GAIN PANIC 3 [-40 to -10] -20. Here we say how much profit or loss we accept in the position to leave if the
downgrade we put above has been reached. That is, in this example, if the open
position reaches -30% of the capital, the capital returns to -20% it closes that
position or the open positions in the account.

Profit Settings
MAX LOSS EA (-50 to -500) -140. How much downgrade do we accept. Many sets with good results have
lower drawdowns than the total capital.

MAX GAIN DAY [1 to 10] 3.5. Maximum daily gain on the account for the Robot to stop operating.

MICRO GAIN [0.1 to 1.5] 1.2. Maximum profit that a position can reach for the Robot to close the open
operations.

CHECK MAXIMUM BALANCE True / false. If we have a loss in any trade, risk management is based on the
maximum balance that the tele account has before removing or placing the Robot
on the chart again. So trades look for bigger targets.

CHECK MAXIMUM STOP True / false

DELETE ALL LIMIT ORDERS True / false. If it is true and hits any value limit to end open trades, it also deletes
all orders placed on the chart and starts over again.

CHECK DISTANCE LIMIT ORDERS True / false. If it is true, every time the Robot is placing a pending order on the
chart, it verifies that it has not already placed any with a minimum allowed
distance below.

MINIMUM DISTANCE LIMIT ORDERS 0.019. If the item above is true, each new pending order must be at least the
distance chosen here to be placed on the chart.

START TIME Start time that is already released to place pending orders on the chart

TIME END NEM TRADES End time for placing pending orders on the chart

CLOSE ALL TIME Time that if the item below is in true, closes all open positions in the account.

CLOSE ALL POSITIONS CLOSE TIME True / false.


STEP BY STEP TO USE THE ROBOT.
https://www.mql5.com/en/market/product/50843

STEP 1: After you have purchased the Robot on the MQL5 website or directly on the Meta Trader 5 platform, open your Meta
Trader 5 and log in to your open broker account. Then at the bottom, look for the MARKET tab and click on it and search for
DSC PRICE ACTION and it will show the full lifetime option that is paid. Click on it and then click on DOWNLOAD in the right
corner.
STEP 2: THE ROBOT WILL APPEAR IN THE META TRADER 5 BROWSER, LEFT IN A MARKET FOLDER.
STEP 3: READY, NOW YOU ALREADY HAVE THE ROBOT AVAILABLE ON YOUR GOAL TRADER, ONLY LOAD THE EURUSD ASSET,
PUT INTO THE 5 MINUTE TIMEFRAME AND PLAY THE ROBOT IN THE GRAPHIC AND LOAD THE SET YOU WILL USE.

GOOGLE DRIVE LINK WITH AVAILABLE SETS:

https://drive.google.com/drive/u/2/folders/1yFz4tJbJwl71_T3YU7f8fqHBoq0aYMsi
STEP 4: IF EVERYTHING HAPPENED NORMALLY YOUR ROBOT WILL BE WITH THE MESSAGE “EA WORKING” AS IN THE PHOTO.
NOW ONLY WAIT FOR THE ROBOT TO BEGIN PENDING ORDERS AT CERTAIN EURUSD PRICES.

The DSC Price Action Robot is a Robot that places pending orders on the chart at possible support points and resistances that it
calculates.

The Robot leaves the trades when it reaches a minimum profit and if it does not happen new trades are positioned, both to
leave the loss and to leave the profit.

That way he manages to have a great performance.

There are three tips for using it.

Tip 1:As the initial recommended capital is only $ 50.00 onwards. If the Robot has a high drawdown close to the total capital,
you can make a new deposit of the same initial amount in the account for it to revert to the profit. (This only before doubling
the account and within your risk management).[Whenever you make any movement of value in the account that uses the
Robot, remove it from the chart and place it again after the capital change. Otherwise, you run the risk of closing open trades
by hitting the win or loss limit].

Tip 2: Only use DSC Price Action on the account. Do not place other Robots or make manual trades with the Robot on.

Tip 3: Follow a correct risk management just like the professionals in the market as explained above and always make a profit
without risking all your capital.

www.dscinvestimentos.com

✅More information by email dscinvestimentos@gmail.com or by Whatsapp +55 55 -991372299

You might also like