Professional Documents
Culture Documents
E3d Book
E3d Book
CADD LABS
EVERYTHING 3D
Text Book
Name
Course
Student ID
Batch
Date
E3D
Hard Work Never Fails
a
Syllabus
R
Volume-I EQUIPMENT
CHAPTER-01
Introduction about Piping & E3D, E3D Login and MDB, E3D Modules Introduction (like
equipment, pipe, structural, hangers & supports, cable tray, HVAC and report, ect…), advance
of E3D design concept, creation of Equipment, primitives & Standard Equipment, Electrical
equipment component and cut out Primitives.
CHAPTER-02
How to Create Nozzle, Nozzle Placement, type of Nozzles, Nozzle Orientation, Nozzle
Speciation Selection and Nozzle class selection, copy of primitive and offset, mirror and rotate.
CHAPTER-03
Equipment co-ordination, Position of equipment, create & Modi�ication of list, working with
3D view, using command window, using of Explicitly and Relatively position, basic equipment
creation, use of position control tool.
CHAPTER-04
creation of Standard Equipment in the library �ile, modify Property of the standard
Equipment, Equipment Speci�ication, modify the equipment properties, attributes, nozzle
speci�ication and equipment origin.
CHAPTER-05
Usage of the Model Editor Tool, edit settings, selection settings, How to use with the Model
Editor tool and model editor settings, set the increment of model editor, delete selection and
use of wholly/partially within.
CHAPTER-06
Creation Working Plane, Creating deferent shape use with Extrusion primitives And
Revolution Primitives, Creating Mitter Bends.
CHAPTER-07
Deals with the general settings, members, view settings and command
window, general query setting
CHAPTER-01
Basic of piping fundamental, create pipe, branch, and piping components, pipe work
hierarchy, pipe orientation, connecting pipe, placing pipe, branch replacing, create insulation
of pipe, create tracing of piping, material selection of pipe, connect method of pipe.
Page No: I
CHAPTER-02
pipe creation using explicit method, modi�ication of speci�ication, component
bore/speci�ication, Arrive & Leave, connection reference and slope, pipe createby model editor,
pipe create by command Line Material selection of pipe.
CHAPTER-03
orientation of component, branch connection, creating pipe assemblies, splitting pipe and
pipe isometric drawings system isometric drawings, data consistency error founding and auto
pipe router, pipe penetration, show pipe system.
CHAPTER-04
Positioning of branch piping components, maintaining bottom of pipe(BOP), Drag piping,
clash checking and pipe work toolbar.
CHAPTER-01
Create a Structural hierarchy, how to set default pro�ile for section, set section storage area
and node storage area, working plane, plant grid, create a section using straight method,
curved method and ring method, regular structure.
CHAPTER-02
how to create tower using regular structure, description about upper & lower S.O.P, bracing
con�iguration and joint creation, base plate creation, foundation creation, 3 leg tower create
using grid.
CHAPTER-03
About modi�ication of section elements, creation of �ittings and positioning of section, creating
bracezing gap, Miter ends, Maintain Bracing gap, give the material about creating section.
CHAPTER-04
Section connection, orientation of structure, general settings and grid creation, structure
query settings, utilities setting like data checker, reference data, constructs, grid, user grid
system.
CHAPTER-05
Creation of panel, Panel Speci�ication Selection, Extrusion\Panel, negative extrusion, Level
Vertical, splitting of panel, positioning of panel and panel �ittings & connections and material
weight calculation
CHAPTER-06
creation of wall & �loor, modi�ication of wall & �loor, Apply Fittings for Walls & Floor, Mitre and
connection at wall ends, position & orientation of wall & �loor and connecting wall, Material &
a
Page No: II
CHAPTER-07
handrail and deletion of platform & handrail. Creation of Handrail and modify of Handrail.
Creation & modi�ication of stair �light, stair tower, ladder and circular platform
@90°,270°,110°.
CHAPTER-01
Creation & modi�ication of cable tray, positioning of trays and general utilities. Modi�ication of
cable tray speci�ication
CHAPTER-02
Creation modi�ication of cableway, branch elements, route point, route node, route
attachment points and material control node, check connection, Dressing cableway system.
Cable tray support.
Volume-V HAVC
CHAPTER-01
Creating inline plant Equipment like AHU, DUCT Routing, Apply Grid and Tiles on grid,
creation of Hvac components, modi�ication of HVAC, positioning of duct, Speci�ication
Generator, Auto Fills with straights, surface area & weight and general utilities.
CHAPTER-01
Creation of hangers & supports, modi�ication of hanger, pipe rack, con�iguration, positioning
of support, support plan, Support Relocation, max span, steel pro�ile, Support Axes and
general utilities.
CHAPTER-01
report generation (MTO) using template, creation of template modi�ication of report and
�ilter report, pipe & steel MTO, Nozzle & valve schedule preparation, column report, report
summary and report format.
CHAPTER-01
Fabrication Drawing, Advance isometric drawing, creation of spool drawing, �ield & shop weld
creation, spool break and isometric drawing of pipe, modify MTO status, convert to DXF, DWG
& DGN.
CHAPTER-01
Generating 2D view from 3D view, creation of department, sheet, user de�ined view, limits
de�ined view, modi�ication of sheet & view, creation of prede�ined frame. Intelligence text.
CHAPTER-02
Creation of 2d draft, shapes, symbols, text and modi�ication of dynamic primitives, sketch
Drafting, Load text, Add Local symbol, Symbol Library Demolish symbol, 3D Representation,
DB Listing, Dynamic primitives & Text and general utilities.
CHAPTER-03
Creation of Layers & Layer De�inition, create & Modify Labels, Linear & Angle Dimension, Edit
Dimension text, De�inition of Dimension, Modify of Dimension Color & Font, projection text,
Label de�inition, Auto Tagging, Auto Drawing Production, Visibility and placement, De�ine
Equipment centre Line and pipe end label.
CHAPTER-04
Section view generation, creation of section �lat, section perpendicular, stepped, Detail view,
Display 3d view, hatching rules , Schedule and Tagging, Auto Drawing production, converting
to dwg format and auto drawing production
CHAPTER-01
Over all Clash checking, Auto clash, Auto Naming, Hole Management, Associations, Data base
export & import, export for other software format, 3D view options, Draw list, Hide �ile, New
Local view section, new clone view, Representation ,Setting and Auto color.
End
Page No: IV
VOLUME-I
a
Duration: 90 Min
Lab Incharge Sign:
Login E3D
START ALL PROGRAM AVEVA EVERYTHING 3D
You have to select required Module from the pull down menu
Username PIPER
Password (If the Password is incorrect you cannot select MOB)
a
Click OK to get E3D Application
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Ph: +91 9500 100 966
Page No: 002
VOLUME-I
By default E3D window will show Model Explorer , Graphical view & Command window
If you close Model Explorer I Graphicalview & Command window you can reopen using the following
EQUI-EX-002
VOLUME-I
EQUI-EX-003
VOLUME-I
EQUI-EX-004
VOLUME-I
With Offset
71 Show last hidden
58
72 Show all hidden
59 WIth Rotate
73 Hidden list
60 Cursor / Element ,Default
74 Drawlist
61 With Mirror
75 Negative primitives
62 Cursor / Default
DELETE
76 Delete Selection
77 Current Element
78 Ce Members
a
Duration: 90 Min
Lab Incharge Sign:
ix
Axis
Axis
Axis
EQUI-EX-05
EQUI-EX-06
VOLUME-I
EQUI-EX-07
VOLUME-I
a
Duration: 90 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Ph: +91 9500 100 966
Page No: 019
Explicit VOLUME-I
Common Position
It is Used to check & Change the Co-ordinate value The Position area
allows each primitive to bepositioned with respect to (wrt) Wor1d This
form lets you position an element either by typing in co-ordinates or by
reference to the position of another design item.
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin
tower
Page No: 020
VOLUME-I
The pick method options determines how the position will be derived from subsequent cursor picks.
The currently selected mode is displayed in the prompt bar, immediately above the graphical view.
Snap
Selects the snap point nearest to the cursor pick point.
Distance
Applies the offset value, which is entered in the adjacent Method Value text-box (for example 500 gives a
point 500 mm from the nearest snap point, measured towards the cursor position; -500 gives a point 500 mm from the
nearest snap point, measured away from the cursor position).
Mid-Point
Derives the mid-point between two snap points along a linear item.
Intersect
Allows the user to pick two lines (any directional items) or three planes and then it derives
their intersection point.
Note: Linear items picked here do not intersect. Derived position is at projected intersection of second
picked item onto first picked item, so order of picking is significant.
Cursor
a Places the derived point exactly where the cursor picks on the element
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 022
VOLUME-I
Move > Distance
Element
Element
Element
Element
Element
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 023
Move > Through VOLUME-I
Element
Element
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 024
VOLUME-I
EQUI-EX-08
VOLUME-I
EQUI-EX-09
VOLUME-I
a
Duration: 90 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 027
Locking/Unlocking Objects VOLUME-I
Tools
Tools
Manage
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 028
VOLUME-I
Manage
Manage
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 029
VOLUME-I
EQUI-EX-010
VOLUME-I
EQUI-EX-011
VOLUME-I
EQUI-EX-012
VOLUME-I
EQUI-EX-013
VOLUME-I
EQUI-EX-014
VOLUME-I
EQUI-EX-015
VOLUME-I
EQUI-EX-016
VOLUME-I
EQUI-EX-017
VOLUME-I
EQUI-EX-018
VOLUME-I
EQUI-EX-019
VOLUME-I
EQUI-EX-020
VOLUME-I
EQUI-EX-021
VOLUME-I
a
Duration: 180 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 042
VOLUME-I
If Items are selected in the 3D design whilst in Model Editor Mode the Model Editor handle is displayed.The display
below shows the Model Editor Handles on Equipment.
Linear Moment:
A handle situated on the Locator Handle, which when selected for a drag operation, constrains
movement of the selection to be along the direction of the Selected Major Axis.
Undo / Redo:
Undo and Redo functions in Model Editor mode allow you to step backwards or forwards through
one or more movement or rotation operations. Undo and Redo operate on a sequence of direct graphical
manipulation operations in the Model Editor.
Move Selection:
Offset in 3D
The Move Selection from appears.Key In the distance to move the equipment and then click the Preview button,
If the position Incorrect than click the OK button if the position is incorrect c:lick the Cancel button.
It is a relative position
Set 3D Positiion
Set 3D Position of selection from appears. Key in the co-ordinate position of
the equipment and then click the preview button
If the position correct than click the OK button
If the position incorrect than click the CANCEL button.
Snap to Point
With the mouse button over the linear handle click the right mouse button and from the pop up select Snap to Point.Move the cursor over the
element, as the Cursor moves over the element & the graphical view displays the possible point positions i.e.P1 etc.. Once the point
required is selected release the mouse button and the equipment will be moved.
VOLUME-I
VOLUME-I
Feature Highlighting :
VOLUME-I
EQUI-EX-022
VOLUME-I
EQUI-EX-023
VOLUME-I
EQUI-EX-024
VOLUME-I
a
Duration: 90 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 051
POSITION
Shortcut Command Descriptions
POSITION
30 Q Pos To check the pos of origin
31 Q p1pos To check the P1 position (Nozzle)
32 Q pos wrt sit Value from site origin
33 Q pos wrt worl Move to down 100mm
34 By e100 Move to east 1OOmn
35 By n100 Move to north
36 By u100 Move to up 1OOmm
37 At u 1000 Move from world origin
38 Move s dist 1200 Object move to south
39 Pose 5000 Current object position taken from origin
40 At idp@ (Primitives, equipment) Origin of ce move to selected p-point
41 Atid@ Origin of ce move to origin of identify object
42 Move u to idp@ Move up to a selected element Point
43 Move utoid@ Move up to a selected element origin
44 Move w to idpl@ Move best to a selected pline
45 Moves dist 5000 Object will move south dir
46 Qe Check the ce East co-ordinate
47 Move s dist 1245 Obiect will move south dir
48 Move utoid@ Move up to a selected element
49 Move w to idpl@ Move west to a selected pline
50 At u 1000 Move from world oriain
51 At idp@ Move ce to selected Pine
ROTATE
52 Rot by45 Rotate 45
53 Rotate by 60 about East Rotate based east direction
54 Rot thro idp@ by90 Rotate object base pick point
55 Rot thro p3 Abo by 40 Rotate object based p3 point
56 New box copy prev Box by w1250 Create previous box orgin from west direction
57 New cyl copy prev cyl by e5000 Create orevious cvl orain from west direction
ORIENTATION
58 Qori To check the origin orientation
59 Q p1ori Check the P1 orientation
60 Ori E is U E axis will chanae uc direction
a
61 Connidp@toidp@ Connect Primitive
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin
tower
Page No: 052
GENERAL SETTINGS & UTILITIES
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin
tower
Page No: 053
Exam Sector - I
Online Theory Exam (Equipment)
Mr/Mrs Was
Success full Completed on Volume I (First Sector Exam). He is Eligible to
Piping
Structure
Electrical
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 054
VOLUME-II
a
Duration: 90 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 055
VOLUME-II
Pipe VOLUME-II
Branch
Name :
If the pipe name 201 Branch name will be 201-B1
Wrt:
Wrt pipe 201
Specifications :
All piping specifications available in the Catalogue databases
are shown in the Piping list. For example:
A150 =ANSI class 150 Rating carbon steel, A300 =ANSI class 300
Rating carbon steel,
F1C =ANSIclass 150 Ratiing stainless steel,and so on.Pick the one
which is to be used as the default for subsequent design selections.
Insulation :
If the piping catalogue has been set up to allow you to add insulation
and trace heating to pipes,you can use the Insulation and Tracing buttons
to select the required specification for each, and set the adjacent toggle
button to On if insulation I tracing is to be added by default as the
model is created
Head/Tail Setting :
Connect / Explicit / None
Connect :
You will connect the head / tail to existing piping components or
equipment nozzles, deriving the position and orientation automatically
when you click OK you will see a connect branch form
Explicit :
When setting the Branch Head or Tail explicitly you need to
specify each of the previously described Branch attributes.
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 057
VOLUME-II
PIPE-EX-001
VOLUME-II
PIPE-EX-002
VOLUME-II
DELETE TOOLS
288 Delete selection 317 Controls
289 Delete range 318 Increments
319 > Linear increment
MODEL EDITOR 320 > Line linear increment
290 Enter value 321 > Angular increment
291 Align with feature 322 Feature highlight
292 Offset from feature 323 Pick through translucent
293 Snap point 324 Drag image
294 Move handle 325 > Solid
295 > Enter value 326 > Translucent
296 > Align with feature 327 > Wireline
297 > Snap to point
298 Enter offset
a
Duration: 90 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 061
Select Route
VOLUME-II
ch
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 063
VOLUME-II
PIPE-EX-003
VOLUME-II
PIPE-EX-004
100 X 80
100 X 80
5830mm
100-A3B-P1-3
3250 3150
a
Duration: 20 Min
Lab Incharge Sign:
PIPE-EX-005
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 066
VOLUME-II
4210
100 X 150
100 X 150
150 X 100
5514
a
Duration: 20 Min
Lab Incharge Sign:
PIPE-EX-006
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 067
VOLUME-II
1700 2850 3150 6000
4000
500
HEX-1
COOLING PUMP-1
TOWER TANK-1 TANK-2
PLAN
COOLING
TOWER
EL:+8.050 M
100-A300-P1-4
80-A3B-P1-3 EL:+5.000M
EL:+4.400M
HEX-1
80-A3B-P1-2
100 X150
150-A300-P1-1 EL:+0.00M
PIPE-EX-008
VOLUME-II
PIPE-EX-009
VOLUME-II
COMPONENT
338 Slope component
ORIENATE
339 Direction towards next
340 Direction towards pick
341 Direction towards head
342 Direction towards tail
343 Orientate current component
344 Swap arrive and leave points
(Flip)
345 Align selection component
346 Direct selection component
347 Change through flow
component
348 Auto complete
349 Copy current component
a
Duration: 90 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 071
Tools
VOLUME-II
VOLUME-II
Modify Pipe
DATA CONSISTENCY ERRORS :-
VOLUME-II
A 10 HEAD REFERENCE NOT SET
The head reference should only be unset
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 075
VOLUME-II
CATALOGUE COMPONENT
This may occur if part of the catalogue has been deleted or if the CATREF IS UNSET.
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 076
VOLUME-II
C530 HCONN IS NOT COMPATIBLE WITH TCONN
This implies that the Head is connected directly to the Tailwith no tube or piping with the Tail connection
type, TCONN.
D400
The distance between the arrive p-point of this component and the leave p-point of the previous component
(or Head} is greater than zero and less than the specified minimum tube length (default: 100mm}.
D410
The position and direction of the arrive p-point of this component are not correct with respect to the leave
p-point of the previous component (or Head).The error could be caused by incorrect positioning of this
component, the previous component (head) or both
a
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 077
VOLUME-II
D420
The bore of the arrive p-point of this component is not equal to the bore of the preceding tube or,
if this component is not preceded by tube, to the bore of the leave p-point of the previous component
(or HBORE).
D430
The connection type of the arrive p-point of this component is not compatible with the preceding tube or,
if this component is not preceded by tube, to the connection type of the leave p-point of the previous
component (or HCONN). 0500 REFERENCE LSTUBE UNSET You have probably forgotten to select
the piping component.
D500
The bore of the leave p-point of this component is not the same as the bore of the tube following the
component.
D600
The bore of the leave p-point of this component is not the same as the bore of the tube following
the component
D610
The connection type of the leave p-point of this component is not compatible with the tube following
the component.
End-Component Diagnostics
These are applicable only to the last component in a Branch.
E700
The distance between the leave p-point of the current component and the tail position, TPOS, is greater
than zero and less than the specified minimum tube length.
E710
The position and direction of the p-point of this component are not correct with respect to the position
TPOS, and direction, TDIR, of the tail. The error could be caused by incorrect positioning of this component,
the tail, or both.
E720
The bore of The leave p-point of this component is not the same as the tail bore
E730
The connection type of the leave p-point of this component is not compatible with the Tail connection
type TCONN.
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 078
VOLUME-II
Duration: 20 Min
Lab Incharge Sign:
PIPE-EX-010
VOLUME-II
a
Duration: 30 Min
Lab Incharge Sign:
PIPE-EX-011
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 080
VOLUME-II
PIPE-EX-012
VOLUME-II
a
Duration: 90 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 082
VOLUME-II
PIPE-EX-015
VOLUME-II
PIPE-EX-016
VOLUME-II
PIPE-EX-017
VOLUME-II
a
n
ign:
PIPE-EX-019
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin
tower
Page No: 089
VOLUME-II
PIPE-EX-020
VOLUME-II
:
PIPE-EX-021
VOLUME-II
PIPE-EX-022
VOLUME-II
PIPE-EX-023
PIPING
Shortcut Command Descriptions
CREATE PIPE WORK
95 For All object created forward mode
96 Bac All object created backward mode
97 Qmode Check the mode (forward or backward)
98 New pipe/name pspec/a Pipe create with specification and name
99 New bran/name Branch create with name and same pipe specification
100 New gas sel Create new gasket
101 New fla sel Create new flange
102 New elb sel Create new elbow
103 New tee sel Create new tee
104 New valve sel Create new gate valve
105 Dir u Elbow change u direction
106 Dist 500 Elbow moved 500
QUERY PIPING
107 Q p1bore Check the bore size (Nozzle, elbow...etc)
108 Q p2bore Check the reducer bore
109 Q p3bore Tee branch bore
110 Q lspec To check the Insulation
111 Q mtxx Checking For Pipe Meterial
112 Q bran Checking For Branch Name
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin
tower
Page No: 094
PIPING BRANCHES
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin
tower
Page No: 095
Exam Sector - II
Online Theory Exam (Pipework)
Mr/Mrs Was
Success full Completed on Volume II (Second Sector Exam). He is Eligible to
Piping
Structure
Electrical
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 096
VOLUME-III
CREATE SECTION
400 Straight
401 Single
402 Continuous
403 Repeat
a
Duration: 90 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 097
Page No: 098
Page No: 099
VOLUME-III
STURC-EX-01
VOLUME-III
STURC-EX-02
VOLUME-III
STURC-EX-03
VOLUME-III
STURC-EX-04
VOLUME-III
STURC-EX-05
VOLUME-III
a
Duration: 90 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 105
VOLUME-III
STURC-EX-06
VOLUME-III
STURC-EX-07
VOLUME-III
STURC-EX-08
VOLUME-III
BRAZING DETAILS OF Electrical Tower
Duration: 5 Min
Lab Incharge Sign:
STURC-EX-09
VOLUME-III
CREATE& MODIFY
447 P-Node at SCTN End
448 Fittings
449 Parameters
450 Positional
451 Bracing gap
452 Material
a
Duration: 90 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No:110
VOLUME-III
Tools
Add to List:
Connections at Split:
None
Nodes
Trimmed
VOLUME-III
Tools
Tools
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 113
VOLUME-III
Tools
. ......
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 114
VOLUME-III
PLINES KEY
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 116
VOLUME-III
STURC-EX-10
VOLUME-III
a
Duration: 90 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 118
CONNECT VOLUME-III
Connect > DisConnect
If SCTN Already Connected , You can Disconnect the SCTN
Trims the section to a Pline selected by the system in accordance with current Pline rule, i.e. the POSL
attribute of the SJOI element is modified.
Connect>Trim to Section
Trims the section according to the current POSL setting of the PJOI element. This may result in the attached
member not being correctly connected, e.g. if the Beta Angle of the Owning SCTN has changed.
subordinate:
If the joint is subordinate, i.e. the attached section is dominant and Jfree is set to false, the attached sections
will extend or trim, maintaining their original orientation, t6'the Pllne that they were trimmed to on creation.
Joint Dominat :
NormalJoint
Subordinate Joint
Dominant
The standard default is for joints to be subordinate. This default can be changed by selecting
Settings>Tolerances.....
VOLUME-III
Common Axis
Axis
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 120
VOLUME-III
STURC-EX-11
VOLUME-III
STURC-EX-12
VOLUME-III
a
Duration: 30 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 124
VOLUME-III
VOLUME-III
STURC-EX-14
VOLUME-III
STURC-EX-15
VOLUME-III
a
Duration: 90 Min
Lab Incharge Sign:
STURC-EX-16
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 128
VOLUME-III
SL.No Title SL.No Title
CREATE 578 Split
538 Structure >Framework 579 Splice
539 Set wall Specification
580 Merge
540 Set Floor Specification
581 Mitre ends
541 Walls > straight wall
542 > String method 582 Wall ends
543 > Single 583 > Extend through
544 > Continuous 584 > Extend by
545 > Radial 585 > Trim end
546 Curved wall 586 > Trim connected
547 User defind
587 Split floor
548 Compound wall
588 Screed slope
549 Create floor
550 > Floor POSITION
551 > Screed 589 Explicit
552 > Nagative extrusion 590 Position (by)
553 > Compound floor CONNECTIONS
554 > Compound screed
591 Connect walls
555 Fittings
592 > Connect walls
556 > Wall fitting
557 > Compound wall fitting 593 > Connect wall to wall
558 > Wall sub-fitting 594 > Align wall connection
559 > Floor fitting 595 Disconnect walls
560 > Compound floor fitting 596 Tidy
561 > Floor sub-fitting 597 > Joints
MODIFY 598 > Nodes
562 Wall
599 Ouery > highlight connections
563 > Definition
564 > Specification 600 > Both ends connected
565 > Position origin 601 > Neither end connected
566 > Justification 602 > One end unconnected
567 > Flip TOOLS
568 Floor 603 Building levels
569 > Definition 604 Matireal
570 > Justification 605 Trace
571 > Thickness defaults
572 > Nagative extrusion
606 Floor representation
573 > Position origin 607 Floor tolerances
574 > Specification 608 Wall tolerances
575 Fitting 609 Wall cut plane
576 > Wall fitting 610 Drawing edge defaults
577 > Floor fitting 611 Drawing edges
Faculty Signature Date
Faculty Name Time
a Duration: 90 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 129
VOLUME-III
STURC-EX-17
VOLUME-III
STURC-EX-18
VOLUME-III
TOOLS
621 Components
622 > Gates
623 > Posts
624 > Terminations
625 > Rails
626 > Kickplate
a
Duration: 90 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 132
VOLUME-III
Panel
STURC-EX-19
VOLUME-III
Panel
STURC-EX-20
VOLUME-III
Panel
a
Duration: 50 Min
Lab Incharge Sign:
STURC-EX-21
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin
tower
Page No: 135
VOLUME-III
STURC-EX-22
VOLUME-III
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin
tower
Page No: 137
VOLUME-III
STURC-EX-23
VOLUME-III
STURC-EX-24
VOLUME-III
STURC-EX-25
VOLUME-III
STURC-EX-26
VOLUME-III
STURC-EX-27
VOLUME-III
STURC-EX-28
Exam Sector - III
Online Theory Exam (Structural)
Mr/Mrs Was
Success full Completed on Volume III (Third Sector Exam). He is Eligible to
Piping
Structure
Electrical
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 144
VOLUME-IV
DELETE UTILITIES
637 Delete range 650 Data Consistency
651 Data Checker
TOOLS 652 Report
638 Options
639 Fill With Straight
640 Remove Straight
641 Move
642 Change Exit
643 Route Component
644 Swap Branch
a
Duration: 30 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 145
VOLUME-IV
a
n: 20 Min
Lab Incharge Sign:
ELECT-EX-01
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin
tower
Page No: 146
VOLUME-IV
a
20 Min
Lab Incharge Sign:
ELECT-EX-02
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin
tower
Page No: 147
VOLUME-IV
MODIFY CONNECT
666 Cableway 690 Check
667 Branch 691 Connect Branch
668 Route 692 Disconnect
669 > Node 693 > Disconnect Branches
670 > Attachment 694 > Disconnect Equipment
671 > Point
672 > Control Node SETTINGS
673 Material 695 Defaults
674 > Material
675 > Material Element
676 Cable
a
Duration: 30 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 150
VOLUME-V
MODIFY
712 HVAC
TOOLS
713 > Show Gap
714 Fill with straights
715 Spool manager
716 Item numbering
717 Split
a
Duration: 90 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 151
VOLUME-V
a
Duration: 45 Min
Lab Incharge Sign:
KDS-EX-02
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin
tower
Page No: 153
VOLUME-VI
a
Duration: 90 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 154
VOLUME-VI
a
Duration: 90 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 155
Exam Sector - IV, V, VI
Online Theory Exam (Electrical, HVAC, Hangers & Supports)
Mr/Mrs Was
Success full Completed on Volume IV (Fourth Sector Exam). He is Eligible to
Piping
Structure
Electrical
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 156
REPORTS VOLUME-VII
a
Duration: 30 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 157
VOLUME-VIII
a
Duration: 30 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 158
VOLUME-IX
a
Duration: 30 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 161
VOLUME-IX
a
Duration: 30 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 162
VOLUME-IX
a
Duration: 30 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 163
VOLUME-IX
a
Duration: 30 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 164
VOLUME-IX
X
VOLUME-X
a
Duration: 15 Min
Lab Incharge Sign:
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 171
VOLUME-X
01 Site Sit
02 Zone Zon
03 Equipment Equ
04 Box Box
05 Cylinder Cyl
06 Cone Con
07 Dish Dis
08 Pyramid Pyr
09 Cir-torus Rtor
10 Snout Sno
11 Sloped cylinder Slcyl
12 Gasket Gas
13 Flange Fla
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 172
15350
19350
EQUI-EX-16 A
EQUI-EX-19
EQUI-EX-16 B 6000
EQUI-EX-20 A EX-20 B EX-20 C EX-20 D EX-20 E EX-20 F EX-20 G EX-20 H EX-20 I EX-20 J
17450
EQUI-EX-08 B
EQUI-EX-08 A
9550 8500
a
Duration:
Lab Incharge Sign:
PR-001A
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 173
a
PROJECT OUTPUT VOLUME-X
REPORTS
Tube MTO
Column MTO
Beam MTO
ISO DRAFT
Basic ISOmetric
DRAFT
Plan View of Pipework With Annotation & 100 nb Line highlight color
Equi Plan View With Annotation & 150 nb Nozzle highlight color
Detailing Of Equipment
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 175
PROJECT COMPLETEDETAIL
Batch Details :
Fast Track
Morning
After Noon
Evening
Weekend
R
PIPING TRAINING INSTITUTE
No x.41 ,Sivanantha building,
2nd floor,Near to Aavin tower
Page No: 176