Professional Documents
Culture Documents
MAU3716 Ratings Book
MAU3716 Ratings Book
BOOK
GUIDA TECNICA
POTENZE
TECHNICAL GUIDE
Contents
Ratings Definitions 6
Dynamic Data Support 6
Environmental Considerations 7
Additional Information
Wiring Connection Diagram 40
SAE Coupling and Mounting Guide 42
Rating Definitions
Emergency Standby Power (ESP) Prime Rated Power (PRP)
Emergency standby power is defined as the Prime power is defined as being the maximum power which a
maximum power available during a variable electrical generating set is capable of delivering continuously while
power sequence, under the stated operating supplying a variable electrical load with an average load ≤70%,
conditions, for which a generating set is capable of when operated for an unlimited number of hours per year
delivering in the event of a utility power outage or under the agreed operating conditions with the maintenance
under test conditions for up to 200 h of operation intervals and procedures being carried out as prescribed by the
per year with the maintenance intervals and manufacturer. A 10% overload power is permitted for a period
procedures being carried out as prescribed by the of one hour with or without interruptions, within 6 hours of
manufacturers. operation; in these conditions the generator insulation system
can age thermally faster.
Limited-time running power (LTP)
Limited-time running power is defined as the
Continuous Operating Power (COP)
maximum power available, under the agreed Continuous power is defined as beign the maximum power
operating conditions, for which the generating set is which the generating set is capable of delivering continuously
capable of delivering for up to 500 h of operation while supplying a constant electrical load when operated for
per year with the maintenance intervals and an unlimited number of hours per year under the agreed
procedures being carried out as prescribed by the operating conditions with the maintenance intervals and
manufacturers. procedures being carried out as prescribed by the manufactu-
rer. Overload on this rating is not allowed.
The 10% overload is not available at ESP and LTP
ratings. In the ‘Ratings Book’ you can find PRP or COP
In the ‘Ratings Book’ you can find ESP or LTP ratings for:
ratings for: 80°/40°: this condition is equivalent to Class B
150°/40°: Peak continuous ratings according to temperature rise.
ISO8528-3. 105°/40°: this condition is equivalent to Class F
temperature rise.
163°/27°: Emergency peak continuous rating, not
defined in ISO specification. Suitable for stand-by 125°/40°: this condition is equivalent to Class H
sizing only. temperature rise.
Altitude Derations/Environmental
Temperature & Altitude
Environmental Concerns
Environmental Concerns
Generators are often exposed to harmful airborne impregnation technologies, like Vacuum Pressure
pollutants, like sand and saltwater which may require Impregnation (VPI) or with the use of dedicated roll
some form of protection to reduce or eliminate these and dip or trickle machines. This impregnation quality
harmful agents. Common elements like dirt, gravel or process is perfect for the vast majority of applications,
rock dust can create abrasive and potentially damaging however in order to achieve the same results in
insulation reliability when environmental or operating
conditions are demanding, it is possible to consider
extend the life of the protective insulation, it may be
Mecc Alte. Please refer to our separate Technical guide:
manufacture. It is also extremely important to recognize Insulation Protection Systems for further guidance
on our; standard, standard+, grey, grey+ and total+
through the generator and create additional heat in the systems. Please note on some specific models a slight
windings. It is also important to understand that the use power de-rate is considered when the total systems are
of filters requires a strict maintenance regime. applied.
Mecc Alte uses premium class H insulation material. Please consult your Mecc Alte Representative for
Impregnation processes are achieved with the latest application reviews and recommendations.
Altitude Derations/Environmental
Ingress Protection IP Ratings
IP 2 3 IP Protection
Code Letters X0 Non-protected machine
(International Protection) X1 Dripping water
First characteristic numeral X2 Dripping water when tilted up to 15°
(numerals 0 to 6, or letter X)
X3 Spraying water
Second characteristic numeral X4 Splashing water
(numerals 0 to 8, or letter X)
X5 Water jets
X6 Heavy seas
When it is required to indicate a degree of protection by Effects of immersion
X7
only one characteristics numeral, the omitted numeral shall
be replaced by the letter X, for example IPX5 or IP2X. X8 Continuous submersion
Additional information may be indicated by a supplementary Mecc Alte offers IP23 across its industrial range.
letter following the second characteristics numeral. If more Upgrades are available such as IP23 DP, or upwards; in
than one letter is used, the alphabetic sequence shall apply. fact, the whole 4 pole industrial range can be upgraded
to IP45 with the fitting of additional IP filter kits.
In special applications (such as machines with open circuit However, when protecting against ingress, the airflow
cooling for ship deck installation with air inlet and outlet and cooling is impacted.
openings closed during standstill) numerals may be followed
by a letter indicating whether the protection against harmful All information are available in our IP Bulletin:
effects due to ingress of water was verified or tested for the https://www.meccalte.com/downloads/MA0605_Bulletin_IP.pdf
8 | www.meccalte.com
AVR Controlled Ratings 3ph 400V 50Hz 1500rpm
Volts
ECP28 M4 C 106 12 DSR 22 20.5 20 18.5 16
ECP28 L4 C 122 12 DSR 27.5 25.5 25 23 20
ECP28 VL4 C 142 12 DSR 33 30.5 30 26 24
/ 400
ECP32 1S4 C 153 12 DSR 41 39 37.5 35 30
ECP32 2S4 C 165 12 DSR 50 48.7 45 41 36
/ 230
ECP32 1M4 C 186 12 DSR 55 52.5 50 48 40
ECP32 2M4 C 212 12 DSR 68.8 65 62.5 59.5 50
ECP32 1L4 C 244 12 DSR 82.5 78 75 67 60
/ 200
ECP32 2L4 C 252 12 DSR 91 85 82.5 73.2 66
ECP34 1S4 C 302 12 DSR 96 93 87.5 79 70
ECP34 2S4 C 349 12 DSR 110 105 100 90 80
115
ECP34 1M4 C 370 12 DSR 137 132 125 112 100
ECP34 2M4 C 388 12 DSR 148 143 135 121 108
ECP34 1L4 C 423 12 DSR 165 158 150 136 120
ECP34 2L4 C 440 12 DSR 181 174 165 149 132
ECO38 1S4 C 530 12 DSR 196 188 180 170 144
ECO38 2S4 C 573 12 DSR 220 211 200 185 160
ECO38 1M4 C 602 12 DSR 250 237 225 207 180
ECO38 2M4 C 692 12 DSR 275 264 250 230 200
ECO38 1L4 C 790 12 DSR 330 315 300 275 240
ECO38 2L4 C 930 12 DSR 370 360 350 320 280
ECO40 1S4 C 1049 12 DER-1/A 440 417 400 370 320
ECO40 2S4 C 1133 12 DER-1/A 491 468 450 410 360
ECO40 3S4 C 1208 12 DER-1/A 546 521 500 450 400
ECO40 1L4 C 1323 12 DER-1/A 601 567 550 500 440
ECO40 2L4 C 1458 12 DER-1/A 675 645 625 564 500
Volts
All machines have ECO40 3L4 C 1536 12 DER-1/A 735 700 680 630 544
an auxiliary winding ECO40 VL4 C 1752 12 DER-1/A 825 777 750 690 600
/ 800
‘standard’ with 300% ECO43 1S4 A 1920 12 DER-1/A 900 860 820 750 655
short circuit capability. ECO43 2S4 A 2140 12 DER-1/A 1016 975 930 850 744
/ 460
Indicated rating ECO43 1M4 A 2275 12 DER-1/A 1125 1070 1025 950 820
references to series or ECO43 2M4 A 2370 12 DER-1/A 1250 1200 1150 1050 920
parallel star connection ECO43 2L4 A 2700 12 DER-1/A 1420 1358 1300 1200 1040
/ 400
as per published table. ECO43 VL4 A 2980 12 DER-1/A 1540 1500 1400 1280 1120
On ECO40, ECO43 and ECO46 1S4 A 3005 12 DER-1/A 1650 1552 1500 1350 1200
ECO46 1.5S4 A 3375 12 DER-1/A 1800 1700 1650 1480 1320
parallel configurations
230
Volts
ECP28 M4 C 106 12 DSR 22 20.5 20 18.5 16
ECP28 L4 C 122 12 DSR 27.5 25.5 25 23 20
ECP28 VL4 C 142 12 DSR 33 30.5 30 26 24
/ 380
ECP32 1S4 C 153 12 DSR 41 39 37.5 35 30
ECP32 2S4 C 165 12 DSR 50 48.7 45 41 36
/ 220
ECP32 1M4 C 186 12 DSR 55 52.5 50 48 40
ECP32 2M4 C 212 12 DSR 68.8 65 62.5 59.5 50
ECP32 1L4 C 244 12 DSR 82.5 78 75 67 60
/ 190
ECP32 2L4 C 252 12 DSR 91 85 82.5 73.2 66
ECP34 1S4 C 302 12 DSR 96 93 87.5 79 70
ECP34 2S4 C 349 12 DSR 110 105 100 90 80
110
ECP34 1M4 C 370 12 DSR 137 132 125 112 100
ECP34 2M4 C 388 12 DSR 148 143 135 121 108
ECP34 1L4 C 423 12 DSR 165 158 150 136 120
ECP34 2L4 C 440 12 DSR 176 169 160 144 128
ECO38 1S4 C 530 12 DSR 196 188 180 170 144
ECO38 2S4 C 573 12 DSR 220 211 200 185 160
ECO38 1M4 C 602 12 DSR 250 237 225 207 180
ECO38 2M4 C 692 12 DSR 275 264 250 230 200
ECO38 1L4 C 790 12 DSR 330 315 300 275 240
ECO38 2L4 C 930 12 DSR 370 360 350 320 280
ECO40 1S4 C 1049 12 DER-1/A 440 417 400 370 320
ECO40 2S4 C 1133 12 DER-1/A 491 468 450 410 360
ECO40 3S4 C 1208 12 DER-1/A 546 521 500 450 400
ECO40 1L4 C 1323 12 DER-1/A 601 567 550 500 440
ECO40 2L4 C 1458 12 DER-1/A 675 654 625 564 500
Volts
ECO43 1S4 A 1920 12 DER-1/A 900 860 820 750 655 an auxiliary winding
ECO43 2S4 A 2140 12 DER-1/A 1016 975 930 850 744 ‘standard’ with 300%
short circuit capability.
/ 440
ECO43 VL4 A 2980 12 DER-1/A 1540 1500 1400 1280 1120 parallel star connection
ECO46 1S4 A 3005 12 DER-1/A 1650 1552 1500 1350 1200 as per published table.
On ECO40, ECO43 and
ECO46 1.5S4 A 3375 12 DER-1/A 1800 1700 1650 1480 1320
220
10 | www.meccalte.com
AVR Controlled Ratings 3ph 415V 50Hz 1500rpm
Volts
ECP28 M4 C 106 12 DSR 22 20.5 20 18.5 16
ECP28 L4 C 122 12 DSR 27.5 25.5 25 23 20
ECP28 VL4 C 142 12 DSR 33 30.5 30 26 24
/ 415
ECP32 1S4 C 153 12 DSR 41 39 37.5 35 30
ECP32 2S4 C 165 12 DSR 46 45 42 39 34
/ 240
ECP32 1M4 C 186 12 DSR 55 52.5 50 48 40
ECP32 2M4 C 212 12 DSR 68.8 65 62.5 59.5 50
ECP32 1L4 C 244 12 DSR 82.5 78 75 67 60
/ 208
ECP32 2L4 C 252 12 DSR 91 85 82.5 73.2 66
ECP34 1S4 C 302 12 DSR 96 93 87.5 79 70
ECP34 2S4 C 349 12 DSR 110 105 100 90 80
120
ECP34 1M4 C 370 12 DSR 137 132 125 112 100
ECP34 2M4 C 388 12 DSR 148 143 135 121 108
ECP34 1L4 C 423 12 DSR 165 158 150 136 120
ECP34 2L4 C 440 12 DSR 181 174 165 149 132
ECO38 1S4 C 530 12 DSR 196 188 180 170 144
ECO38 2S4 C 573 12 DSR 220 211 200 185 160
ECO38 1M4 C 602 12 DSR 250 237 225 207 180
ECO38 2M4 C 692 12 DSR 275 264 250 230 200
ECO38 1L4 C 790 12 DSR 330 315 300 275 240
ECO38 2L4 C 930 12 DSR 370 360 350 320 280
ECO40 1S4 C 1049 12 DER-1/A 440 417 400 370 320
ECO40 2S4 C 1133 12 DER-1/A 491 468 450 410 360
ECO40 3S4 C 1208 12 DER-1/A 546 521 500 450 400
ECO40 1L4 C 1323 12 DER-1/A 590 557 540 490 432
ECO40 2L4 C 1458 12 DER-1/A 675 645 625 564 500
Volts
All machines have ECO40 3L4 C 1536 12 DER-1/A 735 700 680 630 544
an auxiliary winding ECO40 VL4 C 1752 12 DER-1/A 825 777 750 690 600
/ 830
‘standard’ with 300% ECO43 1S4 A 1920 12 DER-1/A 900 860 820 750 655
short circuit capability. ECO43 2S4 A 2140 12 DER-1/A 1016 975 930 850 744
/ 480
Indicated rating ECO43 1M4 A 2275 12 DER-1/A 1125 1070 1025 950 820
references to series or ECO43 2M4 A 2370 12 DER-1/A 1140 1096 1050 960 840
parallel star connection ECO43 2L4 A 2700 12 DER-1/A 1420 1358 1300 1200 1040
/ 415
as per published table. ECO43 VL4 A 2980 12 DER-1/A 1540 1500 1400 1280 1120
On ECO40, ECO43 and ECO46 1S4 A 3005 12 DER-1/A 1650 1552 1500 1350 1200
ECO46 1.5S4 A 3375 12 DER-1/A 1800 1700 1650 1480 1320
240
parallel configurations
ECO46 2S4 A 3560 12 DER-1/A 1944 1863 1800 1600 1440
are available on specific
ECO46 1L4 A 3805 12 DER-1/A 2268 2173 2100 1900 1680
request: consult a Mecc
Alte representative for ECO46 1.5L4 A 4255 12 DER-1/A 2500 2380 2300 2050 1840
more information. ECO46 2L4 A 4375 12 DER-1/A 2700 2588 2500 2250 2000
ECO46 VL4 A 5120 12 DER-1/A 2916 2795 2700 2400 2160
12 | www.meccalte.com
AVR Controlled Ratings 3ph 440V 50hz 1500rpm
RPM: 1500
Insulation: Class H
Volts
ECP28 M4 C 106 12 DSR 20.4 19 18.5 17.5 14.8
ECP28 L4 C 122 12 DSR – – – – –
ECP28 VL4 C 142 12 DSR – – – – –
/ 440
ECP32 1S4 C 153 12 DSR 33 31.6 30 28 24
ECP32 2S4 C 165 12 DSR 37.5 36 34 33 27
/ 254
ECP32 1M4 C 186 12 DSR 44 42 40 38 32
ECP32 2M4 C 212 12 DSR 52 49.5 47.5 42.6 38
ECP32 1L4 C 244 12 DSR 77 73 70 62 56
/ 220
ECP32 2L4 C 252 12 DSR 85 79 77 68 62
ECP34 1S4 C 302 12 DSR 79 77 72 65 58
ECP34 2S4 C 349 12 DSR 88 86 80 72 64
127
ECP34 1M4 C 370 12 DSR 117 112 106 96 85
ECP34 2M4 C 388 12 DSR 125 120 114 103 91
ECP34 1L4 C 423 12 DSR 137 131 125 113 100
ECP34 2L4 C 440 12 DSR 170 163 155 139 124
ECO38 1S4 C 530 12 DSR 180 173 165 155 132
ECO38 2S4 C 573 12 DSR 209 200 190 175 152
ECO38 1M4 C 602 12 DSR 234 221 210 190 168
ECO38 2M4 C 692 12 DSR 253 243 230 215 184
ECO38 1L4 C 790 12 DSR 319 305 290 265 232
ECO38 2L4 C 930 12 DSR 360 350 340 310 272
ECO40 1S4 C 1049 12 DER-1/A 404 386 370 342 296
ECO40 2S4 C 1133 12 DER-1/A 393 375 360 330 288
ECO40 3S4 C 1208 12 DER-1/A 503 479 460 414 368
ECO40 1L4 C 1323 12 DER-1/A 546 515 500 454 400
ECO40 2L4 C 1458 12 DER-1/A 616 588 570 515 456
Volts
‘standard’ with 300% ECO43 1S4 A 1920 12 DER-1/A 825 800 760 690 615
short circuit capability. ECO43 2S4 A 2140 12 DER-1/A 907 870 830 770 664
/ 508
parallel configurations ECO46 2S4 A 3560 12 DER-1/A 1720 1650 1600 1440 1280
are available on specific
ECO46 1L4 A 3805 12 DER-1/A 1990 1900 1850 1660 1480
request: consult a Mecc
Alte representative for ECO46 1.5L4 A 4255 12 DER-1/A 2375 2275 2200 1950 1760
more information. ECO46 2L4 A 4375 12 DER-1/A 2450 2350 2280 2050 1824
ECO46 VL4 A 5120 12 DER-1/A 2150 2060 2000 1780 1600
All machines have an auxiliary winding ‘standard’ with 300% short circuit capability.
The Weights are the same as the ‘standard’ 3 phase Models.
Ratings with damper cage.
Consult Factory to choose for your application.
14 | www.meccalte.com
AVR Controlled Ratings 1ph Reconnected Winding 230V 50Hz 1500rpm
All machines have an auxiliary winding ‘standard’ with 300% short circuit capability.
The Weights are the same as the ‘standard’ 3 phase Models.
Ratings with damper cage.
Consult Factory to choose for your application.
All machines have an auxiliary winding ‘standard’ with 300% short circuit capability.
Consult Factory to choose for your application.
Ratings with damper cage (Except Series 3).
For different nominal voltages please consult Factory.
16 | www.meccalte.com
AVR Controlled Ratings 1ph Dedicated Winding 230V 50Hz 1500rpm
All machines have an auxiliary winding ‘standard’ with 300% short circuit capability.
Consult Factory to choose for your application.
Ratings with damper cage (Except Series 3).
For different nominal voltages please consult Factory.
Volts
ECP28 M4 C 106 12 DSR 26.4 24.6 24 22 19.2
ECP28 L4 C 122 12 DSR 33 30.6 30 27.5 24
/ 480
ECP28 VL4 C 142 12 DSR 39.6 36.6 36 32 29
ECP32 1S4 C 153 12 DSR 49.5 47 45 43 36
ECP32 2S4 C 165 12 DSR 59 57 54 52 43.2
/ 277
ECP32 1M4 C 186 12 DSR 66 63 60 58 48
ECP32 2M4 C 212 12 DSR 82.5 77.5 75 71.5 60
/ 240
ECP32 1L4 C 244 12 DSR 99 93.7 90 83 72
ECP32 2L4 C 252 12 DSR 110 102 100 92 80
ECP34 1S4 C 302 12 DSR 115 111 105 95 84
138
ECP34 2S4 C 349 12 DSR 132 126 120 109 96
ECP34 1M4 C 370 12 DSR 165 159 150 135 120
ECP34 2M4 C 388 12 DSR 178 172 162 146 130
ECP34 1L4 C 423 12 DSR 198 189 180 163 144
ECP34 2L4 C 440 12 DSR 218 208 198 178 158
ECO38 1S4 C 530 12 DSR 236 230 220 205 176
ECO38 2S4 C 573 12 DSR 264 253 240 220 192
ECO38 1M4 C 602 12 DSR 300 284 270 250 216
ECO38 2M4 C 692 12 DSR 330 316 300 280 240
ECO38 1L4 C 790 12 DSR 396 378 360 330 288
ECO38 2L4 C 930 12 DSR 444 438 420 385 336
ECO40 1S4 C 1049 12 DER-1/A 525 500 480 440 384
ECO40 2S4 C 1133 12 DER-1/A 590 563 540 490 432
ECO40 3S4 C 1208 12 DER-1/A 656 625 600 540 480
ECO40 1L4 C 1323 12 DER-1/A 722 680 660 600 528
ECO40 2L4 C 1458 12 DER-1/A 810 775 750 677 600
Volts
ECO43 1S4 A 1920 12 DER-1/A 1080 1030 985 900 790 an auxiliary winding
ECO43 2S4 A 2140 12 DER-1/A 1220 1170 1116 1020 893 ‘standard’ with 300%
short circuit capability.
/ 554
ECO43 VL4 A 2980 12 DER-1/A 1824 1765 1700 1540 1360 parallel star connection
ECO46 1S4 A 3005 12 DER-1/A 1944 1875 1800 1620 1440 as per published table.
ECO46 1.5S4 A 3375 12 DER-1/A 2140 2040 1980 1780 1584 On ECO40, ECO43 and
277
18 | www.meccalte.com
AVR Controlled Ratings 3ph 460V 60Hz 1800rpm
Volts
ECP28 M4 C 106 12 DSR 26.4 24.6 24 22 19.2
ECP28 L4 C 122 12 DSR 33 30.6 30 27.5 24
ECP28 VL4 C 142 12 DSR 39.6 36.6 36 32 29
/ 460
ECP32 1S4 C 153 12 DSR 49.5 47 45 43 36
ECP32 2S4 C 165 12 DSR 59 57 54 52 43.2
/ 266
ECP32 1M4 C 186 12 DSR 66 63 60 58 48
ECP32 2M4 C 212 12 DSR 82.5 77.5 75 71.5 60
ECP32 1L4 C 244 12 DSR 99 93.7 90 83 72
/ 230
ECP32 2L4 C 252 12 DSR 110 102 100 92 80
ECP34 1S4 C 302 12 DSR 115 111 105 95 84
ECP34 2S4 C 349 12 DSR 132 126 120 109 96
133
ECP34 1M4 C 370 12 DSR 165 159 150 135 120
ECP34 2M4 C 388 12 DSR 178 172 162 146 130
ECP34 1L4 C 423 12 DSR 198 189 180 163 144
ECP34 2L4 C 440 12 DSR 218 208 198 178 158
ECO38 1S4 C 530 12 DSR 236 230 220 205 176
ECO38 2S4 C 573 12 DSR 264 253 240 220 192
ECO38 1M4 C 602 12 DSR 300 284 270 250 216
ECO38 2M4 C 692 12 DSR 330 316 300 280 240
ECO38 1L4 C 790 12 DSR 396 378 360 330 288
ECO38 2L4 C 930 12 DSR 444 438 420 385 336
ECO40 1S4 C 1049 12 DER-1/A 525 500 480 440 384
ECO40 2S4 C 1133 12 DER-1/A 590 563 540 490 432
ECO40 3S4 C 1208 12 DER-1/A 656 625 600 540 480
ECO40 1L4 C 1323 12 DER-1/A 722 680 660 600 528
ECO40 2L4 C 1458 12 DER-1/A 810 775 750 677 600
Volts
All machines have ECO40 3L4 C 1536 12 DER-1/A 882 840 816 756 653
an auxiliary winding ECO40 VL4 C 1752 12 DER-1/A 970 925 900 830 720
/ 920
‘standard’ with 300% ECO43 1S4 A 1920 12 DER-1/A 1080 1030 985 900 790
short circuit capability. ECO43 2S4 A 2140 12 DER-1/A 1220 1170 1116 1020 893
/ 530
Indicated rating ECO43 1M4 A 2275 12 DER-1/A 1290 1227 1180 1080 944
references to series or ECO43 2M4 A 2370 12 DER-1/A 1525 1450 1400 1300 1120
parallel star connection ECO43 2L4 A 2700 12 DER-1/A 1700 1630 1560 1440 1248
/ 460
as per published table. ECO43 VL4 A 2980 12 DER-1/A 1824 1765 1700 1540 1360
On ECO40, ECO43 and ECO46 1S4 A 3005 12 DER-1/A 1944 1875 1800 1620 1440
ECO46 1.5S4 A 3375 12 DER-1/A 2140 2040 1980 1780 1584
266
parallel configurations
ECO46 2S4 A 3560 12 DER-1/A 2332 2236 2160 1920 1728
are available on specific
ECO46 1L4 A 3805 12 DER-1/A 2722 2608 2520 2280 2016
request: consult a Mecc
Alte representative for ECO46 1.5L4 A 4255 12 DER-1/A 2980 2860 2760 2460 2208
more information. ECO46 2L4 A 4375 12 DER-1/A 3240 3105 3000 2700 2400
ECO46 VL4 A 5120 12 DER-1/A 3575 3426 3310 2980 2648
Volts
ECP28 M4 C 106 12 DSR 25.3 23.6 23 20 18.4
ECP28 L4 C 122 12 DSR 30.3 28 27.5 25.5 22
/ 440
ECP28 VL4 C 142 12 DSR 39.6 36.6 36 32 29
ECP32 1S4 C 153 12 DSR 47 45 43 41 34.4
ECP32 2S4 C 165 12 DSR 55 53 50 48 40
/ 254
ECP32 1M4 C 186 12 DSR 66 63 60 58 48
ECP32 2M4 C 212 12 DSR 80 74 72.5 70 58
/ 220
ECP32 1L4 C 244 12 DSR 90 86 82 80 65.6
ECP32 2L4 C 252 12 DSR 106 98 96 89 76.8
ECP34 1S4 C 302 12 DSR 115 111 105 95 84
127
ECP34 2S4 C 349 12 DSR 132 126 120 109 96
ECP34 1M4 C 370 12 DSR 154 147 140 125 112
ECP34 2M4 C 388 12 DSR 165 159 150 135 120
ECP34 1L4 C 423 12 DSR 187 178 170 150 136
ECP34 2L4 C 440 12 DSR 210 201 191 165 153
ECO38 1S4 C 530 12 DSR 236 230 220 205 176
ECO38 2S4 C 573 12 DSR 264 253 240 220 192
ECO38 1M4 C 602 12 DSR 300 284 270 250 216
ECO38 2M4 C 692 12 DSR 330 316 300 280 240
ECO38 1L4 C 790 12 DSR 374 357 340 310 272
ECO38 2L4 C 930 12 DSR 444 438 420 385 336
ECO40 1S4 C 1049 12 DER-1/A 492 469 450 410 360
ECO40 2S4 C 1133 12 DER-1/A 557 532 510 460 408
ECO40 3S4 C 1208 12 DER-1/A 634 604 580 520 464
ECO40 1L4 C 1323 12 DER-1/A 669 649 630 570 504
ECO40 2L4 C 1458 12 DER-1/A 762 730 705 636 564
Volts
ECO40 3L4 C 1536 12 DER-1/A 843 803 780 720 624 All machines have
ECO40 VL4 C 1752 12 DER-1/A 970 925 900 830 720 an auxiliary winding
/ 880
ECO43 1S4 A 1920 12 DER-1/A 1080 1030 985 900 790 ‘standard’ with 300%
ECO43 2S4 A 2140 12 DER-1/A 1159 1111 1060 969 850 short circuit capability.
/ 508
ECO43 1M4 A 2275 12 DER-1/A 1200 1144 1100 1000 880 Indicated rating
ECO43 2M4 A 2370 12 DER-1/A 1420 1357 1300 1200 1040 references to series or
ECO43 2L4 A 2700 12 DER-1/A 1618 1550 1482 1368 1186 parallel star connection
/ 440
ECO43 VL4 A 2980 12 DER-1/A 1824 1765 1700 1540 1360 as per published table.
ECO46 1S4 A 3005 12 DER-1/A 1847 1770 1710 1530 1368 On ECO40, ECO43 and
ECO46 1.5S4 A 3375 12 DER-1/A 2030 1936 1880 1690 1504
254
parallel configurations
ECO46 2S4 A 3560 12 DER-1/A 2213 2122 2050 1820 1640
are available on specific
ECO46 1L4 A 3805 12 DER-1/A 2582 2473 2390 2150 1912
request: consult a Mecc
ECO46 1.5L4 A 4255 12 DER-1/A 2829 2715 2620 2330 2096 Alte representative for
ECO46 2L4 A 4375 12 DER-1/A 3067 2939 2840 2550 2272 more information.
ECO46 VL4 A 5120 12 DER-1/A 3375 3234 3125 2800 2500
20 | www.meccalte.com
AVR Controlled Ratings 3ph 415V 60Hz 1800rpm
Volts
ECP28 M4 C 106 12 DSR 23.1 21.5 21 19 16.8
ECP28 L4 C 122 12 DSR 28.6 26.5 26 24 20.8
ECP28 VL4 C 142 12 DSR 36.3 33.5 33 29 26.4
/ 415
ECP32 1S4 C 153 12 DSR 43.5 42 39.5 37 31.6
ECP32 2S4 C 165 12 DSR 52 50 47 43 37.6
/ 240
ECP32 1M4 C 186 12 DSR 60.5 58 55 53 44
ECP32 2M4 C 212 12 DSR 76 71 69 63 55.2
ECP32 1L4 C 244 12 DSR 86 81 78 73 62.4
/ 208
ECP32 2L4 C 252 12 DSR 97 90 88 81 70.4
ECP34 1S4 C 302 12 DSR 108 104 98 88 78
ECP34 2S4 C 349 12 DSR 120 114 110 99 88
120
ECP34 1M4 C 370 12 DSR 143 137 130 116 104
ECP34 2M4 C 388 12 DSR 154 148 140 125 112
ECP34 1L4 C 423 12 DSR 165 158 150 132 120
ECP34 2L4 C 440 12 DSR 187 179 170 155 136
ECO38 1S4 C 530 12 DSR 225 220 210 195 168
ECO38 2S4 C 573 12 DSR 253 242 230 210 184
ECO38 1M4 C 602 12 DSR 289 274 260 240 208
ECO38 2M4 C 692 12 DSR 319 305 290 270 232
ECO38 1L4 C 790 12 DSR 358 341 325 300 260
ECO38 2L4 C 930 12 DSR 402 391 380 350 304
ECO40 1S4 C 1049 12 DER-1/A 459 438 420 383 336
ECO40 2S4 C 1133 12 DER-1/A 524 500 480 435 384
ECO40 3S4 C 1208 12 DER-1/A 590 563 540 484 432
ECO40 1L4 C 1323 12 DER-1/A 623 587 570 515 456
ECO40 2L4 C 1458 12 DER-1/A 720 688 665 605 532
Volts
an auxiliary winding ECO43 1S4 A 1920 12 DER-1/A 990 945 900 820 720
‘standard’ with 300% ECO43 2S4 A 2140 12 DER-1/A 1115 1069 1020 935 816
/ 480
short circuit capability. ECO43 1M4 A 2275 12 DER-1/A 1147 1117 1050 960 840
Indicated rating ECO43 2M4 A 2370 12 DER-1/A 1300 1250 1200 1090 960
references to series or ECO43 2L4 A 2700 12 DER-1/A 1585 1516 1451 1339 1161
/ 415
parallel star connection ECO43 VL4 A 2980 12 DER-1/A 1736 1680 1600 1450 1280
as per published table. ECO46 1S4 A 3005 12 DER-1/A 1728 1656 1600 1440 1280
On ECO40, ECO43 and ECO46 1.5S4 A 3375 12 DER-1/A 1870 1782 1730 1570 1384
240
22 | www.meccalte.com
AVR Controlled Ratings 3ph 400V 60Hz 1800rpm
Volts
ECP28 M4 C 106 12 DSR 22.5 20.9 20.5 19 16.4
ECP28 L4 C 122 12 DSR 28 26 25.5 23.5 20.4
ECP28 VL4 C 142 12 DSR 34.6 32.4 31.5 27.3 25.2
/ 400
ECP32 1S4 C 153 12 DSR 41 39 37.5 35 30
ECP32 2S4 C 165 12 DSR 50 49 45 41 36
/ 230
ECP32 1M4 C 186 12 DSR 55 53 50 48 40
ECP32 2M4 C 212 12 DSR 68.8 65 62.5 58 50
ECP32 1L4 C 244 12 DSR 82.5 80 75 67 60
/ 200
ECP32 2L4 C 252 12 DSR 95 89 86 77 68.8
ECP34 1S4 C 302 12 DSR 99 96 90 82 72
ECP34 2S4 C 349 12 DSR 115 109 105 95 84
115
ECP34 1M4 C 370 12 DSR 143 137 130 117 104
ECP34 2M4 C 388 12 DSR 154 148 140 126 112
ECP34 1L4 C 423 12 DSR 170 163 155 140 124
ECP34 2L4 C 440 12 DSR 187 178 170 155 136
ECO38 1S4 C 530 12 DSR 212 204 195 185 156
ECO38 2S4 C 573 12 DSR 235 224 213 197 170
ECO38 1M4 C 602 12 DSR 265 252 240 220 192
ECO38 2M4 C 692 12 DSR 297 284 270 250 216
ECO38 1L4 C 790 12 DSR 345 330 315 290 252
ECO38 2L4 C 930 12 DSR 408 388 370 340 296
ECO40 1S4 C 1049 12 DER-1/A 448 427 410 375 328
ECO40 2S4 C 1133 12 DER-1/A 513 490 470 430 376
All machines have
an auxiliary winding ECO40 3S4 C 1208 12 DER-1/A 569 540 520 465 416
‘standard’ with 300% ECO40 1L4 C 1323 12 DER-1/A 623 587 570 515 456
ECO40 2L4 C 1458 12 DER-1/A 708 678 655 600 524
Volts
parallel star connection ECO43 1S4 A 1920 12 DER-1/A 955 910 870 800 700
as per published table. ECO43 2S4 A 2140 12 DER-1/A 1071 1027 980 900 784
/ 460
On ECO40, ECO43 and ECO43 1M4 A 2275 12 DER-1/A 1173 1124 1075 985 860
ECO43 2M4 A 2370 12 DER-1/A 1310 1254 1200 1100 960
parallel configurations ECO43 2L4 A 2700 12 DER-1/A 1497 1430 1370 1256 1096
are available on specific
/ 400
Volts
ECP28 3S4 C 97 12 DSR 19.3 18 17.5 16.5 14
ECP28 M4 C 106 12 DSR 22 20.5 20 18.5 16
ECP28 L4 C 122 12 DSR 27.5 25.5 25 23 20
/ 380
ECP28 VL4 C 142 12 DSR 33 31 30 26 24
ECP32 1S4 C 153 12 DSR 41 39 37 35 29.6
/ 220
ECP32 2S4 C 165 12 DSR 48 47 44 40 35.2
ECP32 1M4 C 186 12 DSR 55 53 50 48 40
ECP32 2M4 C 212 12 DSR 68 64 62 57 49.6
/ 190
ECP32 1L4 C 244 12 DSR 82.5 80 75 67 60
ECP32 2L4 C 252 12 DSR 91 86 83 75 66.4
ECP34 1S4 C 302 12 DSR 96 93 88 79 70
110
ECP34 2S4 C 349 12 DSR 110 105 100 90 80
ECP34 1M4 C 370 12 DSR 137 132 125 113 100
ECP34 2M4 C 388 12 DSR 148 143 135 122 108
ECP34 1L4 C 423 12 DSR 165 158 150 136 120
ECP34 2L4 C 440 12 DSR 181 174 165 149 132
ECO38 1S4 C 530 12 DSR 196 188 180 170 144
ECO38 2S4 C 573 12 DSR 220 211 200 185 160
ECO38 1M4 C 602 12 DSR 250 237 225 207 180
ECO38 2M4 C 692 12 DSR 275 263 250 230 200
ECO38 1L4 C 790 12 DSR 330 315 300 275 240
ECO38 2L4 C 930 12 DSR 370 360 350 320 280
ECO40 1S4 C 1049 12 DER-1/A 448 427 410 375 328
ECO40 2S4 C 1133 12 DER-1/A 502 480 460 421 368
ECO40 3S4 C 1208 12 DER-1/A 558 531 510 467 408
ECO40 1L4 C 1323 12 DER-1/A 613 577 560 513 448
ECO40 2L4 C 1458 12 DER-1/A 686 657 635 580 508
Volts
ECO43 1S4 A 1920 12 DER-1/A 920 880 840 765 670 an auxiliary winding
ECO43 2S4 A 2140 12 DER-1/A 1038 996 950 871 760 ‘standard’ with 300%
/ 440
ECO43 1M4 A 2275 12 DER-1/A 1140 1093 1045 957 836 short circuit capability.
ECO43 2M4 A 2370 12 DER-1/A 1278 1223 1170 1072 936 Indicated rating
ECO43 2L4 A 2700 12 DER-1/A 1442 1379 1320 1210 1056 references to series or
/ 380
ECO43 VL4 A 2980 12 DER-1/A 1502 1453 1400 1280 1120 parallel star connection
ECO46 1S4 A 3005 12 DER-1/A 1675 1610 1550 1420 1240 as per published table.
ECO46 1.5S4 A 3375 12 DER-1/A 1830 1740 1690 1550 1350 On ECO40, ECO43 and
220
24 | www.meccalte.com
AVR Controlled Ratings 3ph Dedicated Winding 380V 60Hz 1800rpm
26 | www.meccalte.com
AVR Controlled Ratings 3ph Dedicated 690 V 60Hz 1800rpm
All machines have an auxiliary winding ‘standard’ with 300% short circuit capability.
The Weights are the same as the ‘standard’ 3 phase Models.
Ratings with damper cage.
Consult Factory to choose for your application.
28 | www.meccalte.com
AVR Controlled Ratings 1ph Reconnected Winding 240V 60Hz 1800rpm
All machines have an auxiliary winding ‘standard’ with 300% short circuit capability.
The Weights are the same as the ‘standard’ 3 phase Models.
Ratings with damper cage.
Consult Factory to choose for your application.
All machines have an auxiliary winding ‘standard’ with 300% short circuit capability.
Consult Factory to choose for your application.
Ratings with damper cage (Except Series 3).
For different nominal voltages please consult Factory.
30 | www.meccalte.com
AVR Controlled Ratings 1ph Dedicated Winding 240V 60Hz 1800rpm
All machines have an auxiliary winding ‘standard’ with 300% short circuit capability.
Consult Factory to choose for your application.
Ratings with damper cage (Except Series 3).
For different nominal voltages please consult Factory.
Brushless capacitor excited machines specifically for Metal Halide light tower lamps.
For custom voltages or non-standard lamp striking voltages, please refer to Factory.
32 | www.meccalte.com
NPE Alternator Range 4 Pole | Brushless AVR - Space Saver
All the generators on this page come ‘standard’ with the DSR AVR.
For other combinations of voltages/frequencies please consult our online DDS system.
All the generators on this page come ‘standard’ with the DSR AVR.
34 | www.meccalte.com
Totally Enclosed Alternators
All machines have an auxiliary winding ‘standard’ with 300% short circuit capability.
UVR6/1-H400B AVR has under frequency, over voltage protection, 3ph reference; regulation is +/- 1%.
Line Drop Compensator is also available as an option.
Custom projects available for dedicated power nodes.
The following accessories are available upon request for an additional charge:
Space Heaters
Temperature detectors (thermistors or PT100) for stator windings and bearings.
IP45 or IP54 rated enclosure.
Remote voltage control.
2/3 pitch windings with skewed slots for maximum reduction of harmonic content.
TOTAL+ treatment standard from HCP32 up to HCO38.
4 layers of polyester in addition to a clear varnish and EG43 overcoat on the main and exciter windings is standard
on 400 Hz machines.
36 | www.meccalte.com
2 Pole Industrial Ratings
2 Pole | 1Phase (Capacitor) kVA @ 1.0 PF, 50Hz kVA @ 1.0 PF, 60Hz
MODEL WEIGHT (kg) 115/230 V %EFF 120/240 V %EFF
S15W-45 8.1 1.2 68.8 1.45 69.7
S15W-60 10.4 1.8 70.2 2.2 71.2
S15W-75 12.4 2.2 72.5 2.7 73.4
S15W-85 13.4 2.7 73.4 3.4 74.3
S15W-102 14.8 3 73.3 3.7 74.2
S16W-75 14.3 2.5 74 3 74.6
S16W-90 16.1 3.5 75 4.2 75.6
S16W-105 17.7 4.1 76 5 76.6
S16W-130 21 5 77 6 77.6
S16W-150 23.7 5.7 78 6.8 78.6
S16W-75 HD 14.6 2.5 74 3 74.6
S16W-90 HD 16.4 3.5 75 4.2 75.6
S16W-105 HD 18 4.1 76 5 76.6
S16W-130 HD 21.3 5 77 6 77.6
S16W-150 HD 24 5.7 78 6.8 78.6
S20W-95 27.4 6 77.5 7.2 78.2
S20W-110 30.5 7 78.4 8.4 79.2
S20W-130 34.9 8.5 79 10.2 79.8
S16F-150 28 5.5 79 6.6 79.6
S16F-180 31 6.5 79.5 7.8 80.1
S20FS-130 41.7 8.5 79 10.5 79.4
S20FS-160 48.7 10.0 79.2 12 79.6
S20F-200 56.5 12.0 80.3 14.4 80.8
S20F-230 60 13.0 82.1 15.5 82.7
Above machines are brushless with capacitior control and optional AVR.
2 Pole | 1Phase (AVR) kVA @ 1.0 PF, 50Hz kVA @ 1.0 PF, 60Hz
MODEL WEIGHT (kg) 115/230 V %EFF 120/240 V %EFF
ES16W-75 HD 15.6 2.3 73.7 2.7 74.2
ES16W-90 HD 17.5 3 74.2 3.6 74.8
ES16W-105 HD 19.6 3.5 77 4.2 77.7
ES16W-130 HD 22.8 4.5 79.4 5.4 80
ES16W-150 HD 25.5 5 79.7 6 80.3
ES16F-130 25.8 4.5 79.4 5.5 80
ES16F-160 29.8 5.5 79.8 6.8 80.5
ES20FS-130 41.2 8 79.4 9.6 79.8
ES20FS-160 48.2 9.5 79.6 11.4 80
ES20F-200 56 11 80.7 13.2 81.2
38 | www.meccalte.com
2 Pole Portable Ratings Three Phase
2 Pole | 3Phase (Transformer) kVA @ 0.8 PF, 50Hz kVA @ 0.8 PF, 60Hz
MODEL WEIGHT (kg) 230/400 V %EFF 277/480 V %EFF
T16F-130 30.5 6.0 79.8 7.2 80.3
T16F-160 34.5 7.5 82.0 9 82.5
T20FS-130 44.7 10 81.5 12 83.0
T20FS-160 51.7 12.5 82.0 15 83.5
T20F-200 59.5 15 82.6 18 83.8
2 Pole | 3Phase (AVR) kVA @ 0.8 PF, 50Hz kVA @ 0.8 PF, 60Hz
MODEL WEIGHT (kg) 230/400 V %EFF 277/480 V %EFF
ET16F-130 30 5.5 80.2 6.6 80.6
ET16F-160 34 6.5 82.3 7.8 82.5
ET20FS-130 44.2 9 81.9 11 83.6
ET20FS-160 51.2 11.5 82.4 14 83.9
ET20F-200 59 13.5 82.9 16.5 84.1
50Hz Connections
The following are the most common connection arrangements utilized with Mecc Alte generators. Always verify that
the connections of all the leads from the main stator are consistent with the nameplate voltage required. Connection
diagrams are supplied with every generator and should be used as the primary source of information. Please consult
the factory for any questions regarding these connections.
Three Phase
50Hz Series 3, 28, 31, 32, 34, 38 Series 40, 43, 46
L1 L1–L2–L3: 400V 3ø
L1–L2: 400V
1 L1–L3: 400V
L2–L3: 400V L-L 380 400 415 440 760 800 830 880
2 N–L1: 230V
3
Series Star 4
N
N–L2: 230V
N–L3: 230V
12
11 8
10
L3
9 7
6 L2 400 VOLT, 3PHASE
L-N 220 230 240 254 440 460 480 508
5
L1–L2–L3: 200V 3ø
L1 L1–L2: 200V
L1–L3: 200V
1 3
L2–L3: 200V L-L 190 200 208 220 380 400 415 440
N–L1: 115V
Parallel Star N
N–L2: 115V
N–L3: 115V
2 4
12 6
L3
11 10 8
7
5
L2
200 VOLT, 3PHASE L-N 110 115 120 127 220 230 240 254
9
115 VOLT, 1PHASE
L1 L1–L2–L3: 230V 3ø
L1–L2: 230V
12 1 L1–L3: 230V
L2–L3: 230V L-L 220 230 240 254 440 460 480 508
11 2 M–L1: 115V
M
Series Delta 10 3
M–L2: 115V
9 4 230 VOLT, 3PHASE L-M 110 115 120 127 220 230 240 254
L3 8 7 6 5 L2 115/230 V OLT, 1PHASE
L1 L1–L2–L3: 115V 3 ø
L1–L2: 115V
L1–L3: 115V
10 1 L2–L3: 115V
12 3
Parallel Delta L-L 110 115 120 127 220 230 240 254
9 11 4 2
8 7
115 VOLT, 3PHASE
L3 6 5 L2 115 VOLT,1PHASE (L1-L2)
L1–L2–L3: 346V 3 ø
L1 1 L1–L2: 200V
2
12
L1–L3: 200V
L2–L3: 200V
L-L 330 346 360 380 660 690 720 760
N
Zig-Zag (*) 7
11 L2
8 3 5
10
46
346 VOLT, 3PHASE L-N 191 200 208 220 380 400 415 440
L3 9 200 VOLT,1PHASE (L1-L2)
L1–L2: 230V
8 9 M–L1: 115V
6 11 M–L2: 115V L-L 220 230 240 254 440 460 480 508
Single Phase 7 10
5 12
Parallel Zig-Zag 2 1
L2 M 3
L1
4
L-M 110 115 120 127 220 230 240 254
115/230 VOLT, 1PHASE
L1–L2: 230V
8 11 6 9 M–L1: 115V
M–L2: 115V L-L 220 230 240 254 440 460 480 508
Single Phase 12
7 5 10
Double Delta
L2 4 3 2 1 L1
(**) M L-M 110 115 120 127 220 230 240 254
115/230 VOLT, 1PHASE
L1 L2
L1–L2: 230V
M–L1: 115V L-L 220 230 240
Series 1 2 3 4 M–L2: 115V
M
115/230 VOLT, 1PHASE L-M 110 115 120
1 2 L1–L2: 115V
Parallel L1
3 4
L2
L-L 110 115 120
115 VOLT, 1PHASE
In case of single phase load, it is important that the phase current does not exceed the nominal value.
(*) Rated power must be multiplied by 0.866.
(**) Half of rated power is obtainable when connecting between L1-M or L2-M.
40 | www.meccalte.com
Wiring Connection Diagram
60Hz Connections
The following are the most common connection arrangements utilized with Mecc Alte generators. Always verify that
the connections of all the leads from the main stator are consistent with the nameplate voltage required. Connection
diagrams are supplied with every generator and should be used as the primary source of information. Please consult
the factory for any questions regarding these connections.
Three Phase
60Hz Series 3, 28, 31, 32, 34, 38 Series 40, 43, 46
L1 L1–L2–L3: 480V 3ø
L1–L2: 480V
1 L1–L3: 480V
L2–L3: 480V L-L 415 440 460 480 830 880 920 960
2 N–L1: 277 V
3
Series Star 4
N
N–L2: 277 V
N–L3: 277 V
12
11 8
10
L3
9 7
6 L2 480 VOLT, 3PHASE
L-N 240 254 266 277 480 508 530 554
5
L1–L2–L3: 240V 3ø
L1 L1–L2: 240V
L1–L3: 240V
1 3
L2–L3: 240V L-L 208 220 230 240 415 440 460 480
N–L1: 139V
Parallel Star N
N–L2: 139V
N–L3: 139V
2 4
12 6
L3
11 10 8
7
5
L2
240 VOLT, 3PHASE L-N 120 127 133 139 240 254 266 277
9 139 VOLT, 1PHASE
L1 L1–L2–L3: 277V 3ø
L1–L2: 277V
12 1 L1–L3: 277V
L2–L3: 277V L-L 240 254 266 277 480 508 530 554
11 2 M–L1: 139V
M
Series Delta 10 3
M–L2: 139V
9 4 277 VOLT, 3PHASE L-M 120 127 133 139 240 252 266 277
L3 8 7 6 5 L2 139/277 VOLT, 1PHASE
L1 L1–L2–L3: 139V 3 ø
L1–L2: 139V
L1–L3: 139V
10 1 L2–L3: 239V
12 3
Parallel Delta L-L 120 127 133 139 240 252 266 277
9 11 4 2
8 7
139 VOLT, 3PHASE
L3 6 5 L2 139 VOLT,1PHASE (L1-L2)
L1–L2–L3: 415V 3 ø
L1 1 L1–L2: 240V
2
12
L1–L3: 240V
L2–L3: 240V
L-L 359 380 400 415 720 760 800 830
N
Zig-Zag (*) 7
11 L2
8 3 5
10
46
415 VOLT, 3PHASE L-N 207 220 230 240 415 440 460 480
L3 9 240 VOLT,1PHASE (L1-L2)
L1–L2: 277 V
8 9 M–L1: 139V
6 11 M–L2: 139V L-L 240 254 266 277 440 460 480 554
Single Phase 7 10
5 12
Parallel Zig-Zag 2 1
L2 M 3
L1
4
L-M 120 127 133 139 220 230 240 277
139/277 VOLT, 1PHASE
L1–L2: 277 V
8 11 6 9 M–L1: 139V
M–L2: 139V L-L 240 254 266 277 440 460 480 554
Single Phase 12
7 5 10
Double Delta
L2 4 3 2 1 L1
(**) M L-M 120 127 133 139 220 230 240 277
139/277 VOLT, 1PHASE
L1 L2
L1–L2: 230V
M–L1: 115V L-L 220 230 240
Series 1 2 3 4 M–L2: 115V
M
115/230 VOLT, 1PHASE L-M 110 115 120
1 2 L1–L2: 115V
Parallel L1
3 4
L2
L-L 110 115 120
115 VOLT, 1PHASE
In case of single phase load, it is important that the phase current does not exceed the nominal value.
(*) Rated power must be multiplied by 0.866.
(**) Half of rated power is obtainable when connecting between L1-M or L2-M.
2 447,7 (17 5/8) 466,7 (18 3/8) 489 (19.25) 12 M10 (3/8)
3 409,6 (16 1/8) 428,6 (16 7/8) 451 (17.75) 12 M10 (3/8)
4 362 (14.25) 381 (15) 403 (15 7/8) 12 M10 (3/8)
5 314,3 (12 3/8) 333,4 (13 1/8) 356 (14) 8 M10 (3/8)
XG
S.A.E. Flywheel Dimensions, mm (in)
Flywheel A B C XG Holes Size
21 584,2 (23) 641,35 (25.25) 673,1 (26.5) 0 12 M16 (5/8)
18 498,5 (19 5/8) 542,35 (21 3/8) 571,5 (22.5) 15,7 (5/8) 6 M16 (5/8)
14 409,6 (16 1/8) 438,15 (17.25) 466,72 (18 3/8) 25,4 (1) 8 M12 (1/2)
A B C
11 1/2 314,3 (12.375) 333,37 (13.125) 352,42 (13 7/8) 39,6 (1 9/16) 8 M10 (3/8)
10 276,2 (10 7/8) 295,27 (11 5/8) 314,32 (12 3/8) 53,8 (2 1/8) 8 M10 (3/8)
8 225,4 (8 7/8) 244,47 (9 5/8) 263,52 (10 3/8) 62 (2 7/16) 6 M10 (3/8)
7 1/2 206,4 (8 1/8) 222,25 (8.75) 241,3 (9 1/2) 30,2 (1 3/16) 8 M8 (5/16)
6 1/2 184,2 (7.25) 200 (7 7/8) 215,9 (8 1/2) 30,2 (1 3/16) 6 M8 (5/16)
42 | www.meccalte.com
MECC ALTE MECC ALTE MECC ALTE ZANARDI
SPA (HQ) PORTABLE POWER PRODUCTS ALTERNATORI
Via Roma Via A. Volta Via Melaro Via Dei Laghi
20 – 36051 Creazzo 1 37038 Soave 2 – 36075 Montecchio 48/B – 36077 Altavilla
Vicenza – ITALY Verona – ITALY Maggiore (VI) – ITALY Vicenza – ITALY
T: +39 0444 396111 T: +39 0456 173411 T: +39 0444 1831295 T: +39 0444 370799
F: +39 0444 396166 F: +39 0456 101880 F: +39 0444 1831306 F: +39 0444 370330
E: info@meccalte.it E: info@meccalte.it E: info@meccalte.it E: info@zanardialternatori.it
aftersales@meccalte.it aftersales@meccalte.it aftersales@meccalte.it
T: +1 815 344 0530 T: +49 (0) 2203 60541-0 T: +61 (0) 8 8349 8422
F: +1 815 344 0535 F: +49 (0) 2203 60541-49 F: +61 (0) 8 8349 8455
E: info@meccalte.us E: info@meccalte.de E: info@meccalte.com.au
aftersales@meccalte.us aftersales@meccalte.de aftersales@meccalte.com.au
www.meccalte.com