A Project

Report On

MAIN PROJECT TITLE

Submitted in partial fulfillment of the requirements for the award of the degree of

BACHELOR OF TECHNOLOGY
in

COMPUTER SCIENCE & ENGINEERING

from

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY

HYDERABAD
By

XXXXXXX (20C11A05XX)
XXXXXXX (20C11A05XX)
XXXXXXX (20C11A05XX)
XXXXXXX (20C11A05XX)

Under the guidance of

Dr./Mr./Ms. NAME OF THE GUIDEM.Tech/Ph.D.
Assistant Professor/Associate Professor

DEPARTMENT OF COMPUTER SCIENCE & ENGINEERING

ANURAG ENGINEERING COLLEGE
AN AUTONOMOUS INSTITUTION
(Affiliated to JNTU-Hyderabad & Approved by AICTE-New Delhi)
ANANTHAGIRI (V) (M), SURYAPETA (Dt), TELANGANA -508206.
www.anurag.ac. in
2023-24
 A Project Report
On

TITLE OF MAIN PROJECT

Submitted in partial fulfillment of the requirements
for the award of the degree of

BACHELOR OF TECHNOLOGY
in

COMPUTER SCIENCE & ENGINEERING

from

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY

HYDERABAD

By

XXXXXXX - (20C11A05XX)
XXXXXXX - (20C11A05XX)
XXXXXXX - (20C11A05XX)
XXXXXXX - (20C11A05XX)
Under the guidance of
Dr./Mr./Ms. NAME OF GUIDE M.Tech/Ph.D.
Assistant Professor/Associate Professor

DEPARTMENT OF COMPUTER SCIENCE & ENGINEERING

ANURAG ENGINEERING COLLEGE

AUTONOMOUS
(Affiliated to JNTU-Hyderabad & Approved by AICTE-New Delhi)
ANANTHAGIRI (V) (M), SURYAPETA (Dt), TELANGANA -508206.
www.anurag.ac. in
2023-24
 ANURAG ENGINEERING COLLEGE
AUTONOMOUS
(Affiliated to JNTU-Hyderabad & Approved by AICTE-New Delhi)
ANANTHAGIRI (V) (M), SURYAPETA (Dt), TELANGANA -508206.
www.anurag.ac.in

CERTIFICATE

This is to certify that the project work entitled “TITLE OF MAIN

PROJECT” is a bonafide work done by“XXXXXXX(20C11A05XX),
XXXXXXX(20C11A05XX), XXXXXXX(20C11A05XX) & XXXXXXX(20C11A05XX)” in the
partial fulfillment for the award of Bachelor of Technology in Computer Science &
Engineering from JNTU, Hyderabad during the year 2023-24.

This work has not been submitted to any other university or institute or
organization for the award of any degree or diploma.

(Dr./Mr/Ms..NAME OF GUIDE) (G. SRINIVASA RAO )

SUPERVISOR H.O.D., C.S.E

(Dr. Suresh Kumar Tummala M.Tech, Ph.D.,)

EXTERNAL EXAMINER PRINCIPAL
 R TECHNO SOLUTIONS
PROJECT STAGE - II COMPLETION CERTIFICATE
This is to certify that the students undergone B.Tech Project Stage - II at
RTECHNOSOLUTIONS,Hyderabad.Theprojectentitled“TITLE OF MAIN
PROJECT”.

S.No STUDENT NAME ROLL NO

1 XXXXXXXXX 20C11A05XX

2 XXXXXXXXX 20C11A05XX

3 XXXXXXXXX 20C11A05XX

4 XXXXXXXXX 20C11A05XX

Above Students record of the bonafide work undertaken by his/her

towards partial fulfillment of the academic requirements for award
B.Tech in CSE from ANURAG ENGINEERING COLLEGE, ANANTHAGIRI.
He/ShehascompletedtheB.TechMajorProjectworkfrom excellently.

Managing Director
R TECHNO SOLUTIONS

# 301 city center building, Polkampally, Dwarka Nagar, Green Hills

colony, L.B.Nagar, Hyderabad, Telangana - 500035
CONTACT: +919866393564, 040-48534719,
www.rtechnosolutions.com
 ACKNOWLEDGEMENTS
This report will certainly not be completed without due acknowledgements
paid to all those who helped during this project work.

We would like to express our gratefulness to the project trainer Mr.VENKAT

and RTECHNO, HYDERABAD for the valuable guidance in carrying out this project
work.

We express sincere thanks to our supervisor Dr./Mr./Ms. NAME OF

GUIDE, for giving moral support, kind attention and valuable guidance throughout this
project work.

It is our privilege to thank Mr. G.SRINIVASA RAO, Head of the

Department for his encouragement during the progress of this project work.

We are thankful to both Teaching and non-teaching staff members of

CSE DEPARTMENT for the kind cooperation and all sorts of help in bringing out this
project work successfully.

We derive great pleasure in expressing our sincere gratitude to the principal

Dr. SURESH KUMAR TUMMALA for his timely suggestions, which helped to
complete this work successfully.

We are thankful to the ANURAG ENGINEERING COLLEGE for

providing required facilities during the project work.

We would like to thank our parents and friends for being supportive all the
time, and We are very much obliged to them.

XXXXXX (20C11A05XX)
XXXXXX (20C11A05XX)
XXXXXX (20C11A05XX)
XXXXXX (20C11A05XX)
TITLE OF MAIN
PROJECT
 CONTENTS
ABSTRACT ii
LIST OF FIGURES iii
LIST OF ACRONYMS iv
LIST OF TABLES v
I. INTRODUCTION
1.1 Objective 1
1.2 Problem Statement 2
1.3 Existing System 2
1.4 Proposed System 2
II. SYSTEM ANALYSIS
2.1 Literature Survey 4
2.2 System Specification 5
2.3 Feasibility Study 5
III. SYSTEM DESIGN
3.1 Architecture 7
3.2 DataFlow Diagram 7
3.3 Modules 8
3.4 Design Representation 9
IV IMPLEMENTATION
4.1 Technologies 16
4.2 What Is Machine Learning 19
4.3 Framework 25
4.4 Modules Used in project 25
V SYSTEM TEST
5.1 Types Of Tests 34
5.2 Test Case 37
VI RESULTS 39
VII CONCLIUSION 49
VIII FUTURE ENHANCEMENT 50
BIBLIOGRAPHY 51

i
 ABSTRACT
Times New Roman 12 font size with line spacing 1.5

ii
 LIST OF FIGURES

Figure Description Page

10

11

12

13

14

15

39

40

41

42

43

44

45

46

47

48

iii
LIST OF ACRONYMS

iv
 LIST OF TABLES
Table Description Page No

v
INTRODUCTION
 Chapter-I
INTRODUCTION
1.1 OBJECTIVE:

1.2 PROBLEM STATEMENT:

1.3 EXISTING SYSTEM:

1.3.1DRAWBACKS:

1.4 PROPOSED SYSTEM:

1.4.1 ADVANTAGES:

C.S.E., A.E.C. 7 TITLE OF MAIN PROJECT

SYSTEM ANALYSIS
 Chapter-II
SYSTEM ANALYSIS

2.1 LITERATURE SURVEY:

2.2 SYSTEM SPECIFICATION:

2.2.1 HARDWARE SPECIFICATION:

2.2.2 SOFTWARE SPECIFICATION:

2.3 FEASIBILITY STUDY:

2.3.1. ECONOMICAL FEASIBILITY:

2.3.2. TECHNICAL FEASIBILITY:

2.3.3 SOCIAL FEASIBILITY:

C.S.E., A.E.C. 9 TITLE OF MAIN PROJECT

SYSTEM DESIGN
 Chapter-III
SYSTEM DESIGN

3.1 SYSTEM ARCHITECTURE:

3.2 DATA FLOW DIAGRAM:

3.3. MODULES:
3.4 DESIGN REPRESENTATION:
3.4.1 USE CASE DIAGRAM:
3.4.2 CLASS DIAGRAM:
3.4.3 SEQUENCE DIAGRAM:
3.4.4 ACTIVITY DIAGRAM:
3.4.5 COMPONENT DIAGRAM:
3.4.6 DEPLOYMENT DIAGRAM:

C.S.E., A.E.C. 11 TITLE OF MAIN PROJECT

IMPLEMENTATION
 Chapter-IV

IMPLEMENTATION

4.1 TECHNOLOGIES:

4.1.1 PYTHON:
4.1.2 ADVANTAGES OF PYTHON :

4.2 WHAT IS MACHINE LEARNING :

4.2.1 CATEGORIES OF MACHINE LEANING :

4.2.2 NEED OF MACHINE LEARNING:
4.2.3 CHALLENGES IN MACHINES LEARNING :
4.2.4 APPLICATIONS OF MACHINES LEARNING :

4.2.5 TYPES OF MACHINE LEARNING:

4.2.6ADVANTAGES OF MACHINE LEARNING :
4.3 FRAMEWORK:
4.4 Modules Used in Project :-

Source Code:

C.S.E., A.E.C. 13 TITLE OF MAIN PROJECT

SYSTEM TEST
 Chapter-V

SYSTEM TEST

5.1 TYPES OF TESTS:

5.2 TEST CASES:

S.NO TEST CASE EXPECTED ACTUAL RESULTS

RESULT RESULT

1.

2.

3.

Table 5.2 :Test Cases

C.S.E., A.E.C. 15 TITLE OF MAIN PROJECT

RESULTS
 Chapter-VI

RESULTS

C.S.E., A.E.C. 17 TITLE OF MAIN PROJECT

CONCLUSION
 Chapter-VII

CONCLUSION

C.S.E., A.E.C. 49 TITLE OF MAIN PROJECT

FUTURE ENHANCEMENT
 Chapter-VIII

FUTURE ENHANCEMENT

C.S.E., A.E.C. 50 TITLE OF MAIN PROJECT

BIBLIOGRAPHY
 BIBLIOGRAPHY

PUBLICATIONS:

BOOKS:

WEBSITES:

C.S.E., A.E.C. 51 TITLE OF MAIN PROJECT