Professional Documents
Culture Documents
Blade Tip
Blade Tip
Blade Tip
PC
optimum performance under normal conditions.
P-0
202 00
Tip the blade forward in order to obtain a cutting edge angle up to 60 degrees. Tipping the blade
4 4
forward provides improved penetration in hard materials.
24:1 8
blade rearward provides a better carrying capability of soft material.
S EBBlade 1Pitch
Adjustment of Bulldozer +07
U
© 2 821 :00
024 3
Cat
erp
illa
r In
c.
Illustration 1 g01258184
https://sis2.cat.com/#/print-preview/service/b927fb05-4a7e-46f1-8210-a4afcd6405db 1/3
2/28/24, 12:24 PM SIS 2.0
Illustration 2 g01258266
The bulldozer blade can be placed in several pitch positions such as the following pitches: the
extended position (A), the middle position (B) and the retracted position (C).
1. Lower the bulldozer blade to the ground. Place the control for the lift cylinder in the FLOAT
position.
2. Actuate the tilt cylinder in order to remove all force from the tilt brace. Boss (5) must be
loose and able to move freely. Stop the engine.
NOTICE
Keep fingers clear. Do not place your fingers into the pin holes
in the tilt brace and/or push arm bracket at any time during the
adjustment procedure.
5. Turn the top link until the desired cutting angle is set.
PCP-00046BFA
2024/02/28
05:23:44+07:00
https://sis2.cat.com/#/print-preview/service/b927fb05-4a7e-46f1-8210-a4afcd6405db 2/3
2/28/24, 12:24 PM SIS 2.0
i02537987
© 2024 Caterpillar Inc.
https://sis2.cat.com/#/print-preview/service/b927fb05-4a7e-46f1-8210-a4afcd6405db 3/3