Professional Documents
Culture Documents
F1091 - Fire Fighting System Trainer
F1091 - Fire Fighting System Trainer
Industry
GAD
Training
Equipment
Solution
Provider
Ready Certified by: TUV NORD ISO9001.2015
[F] Automation
Fighting
Fire Alarm SystemUnit
Training Trainer
Model: F1091
Technical datasheet [rev 0]
Design concept based on didatic consideration
FEATURES Failure supervision for mains, charger and battery
Failure supervision for detectors and alarms
Study of water pump and sprinkler system
Comes with regulated DC power supply
Compatible with 2 wire smoke and heat detector
Solid state control
Robust, reliable and user friendly
Can be upgrade with the following technologies:
»» SCADA system
»» Augmented Reality (AR)
»» Industry 4.0 Technology
GAD
Training
Equipment
Solution
Provider
Certified by: TUV NORD ISO9001.2015
© All rights reserved. Equipment fabricator reserves the right to make changes for better improvement with latest
technology available without notice. This publication shall not be liable for any tender, printing or typographical error.
[F] Automation
GENERAL DESCRIPTION
This educational training system simulates a standard fire
alarm system with sprinkler system, suitable to teaching, learning and
demonstration purposes. Industry
Devices such as control detectors, warning devices, power supply,
sprinkler, pump and others are demonstrated here.
GAD
Manuals included that covers the operation and lab exercises with
guided procedures. Training
Equipment
Solution
Provider
Certified by: TUV NORD ISO9001.2015
© All rights reserved. Equipment fabricator reserves the right to make changes for better improvement with latest
technology available without notice. This publication shall not be liable for any tender, printing or typographical error.
[F] Automation
TECHNICAL SPECIFICATION
System includes: Working Table:
Dimension : 1500mm x 900mm x 760mm)
Mobile Console : 1 unit Fitted with 4 castor wheels (2 are lockable) : 1 set
System Control & Indicators : 1 unit
System Connecting Points/Terminals : 1 unit System Connecting Points and Terminals
Zone Indication : 2 unit Fitted with 4mm sockets
Smoke Detector : 2 unit
Heat Detector : 2 unit Input Power Supply Requirement : - 240VAC,1 phase, 50Hz via input
Flashing Lights : 1 unit cable c/w 13A 3 pin BS plug
Bell & Buzzer : 1 unit
Panic Glass Break Emergency switches : 2 unit System Control & Indicators:
Water Pump with tank : 1 unit
Sprinkler : 2 unit Solid State Control Station : 1 unit
Water Tank : 1 unit Ammeter : 1 unit
Study Panel Mounting Frame for Voltmeter : 1 unit
Teaching Modules : 1 unit LED Monitor Lights : 25 units
Push Button : 5 units
Water Pump: Panel Fuses : 2 unit
Water Pump : 1 unit Toggle Switches : 4 unit
Simulation Dummy Room with Sprinkler : 1 unit
GAD
Training
Equipment
Solution
Provider
Certified by: TUV NORD ISO9001.2015
© All rights reserved. Equipment fabricator reserves the right to make changes for better improvement with latest
technology available without notice. This publication shall not be liable for any tender, printing or typographical error.
[F] Automation
ACCESSORIES
Battery Charger / Regulated DC Power Supply 24VDC : 1unit
Connecting leads both ends fitted with 4mm plugs : 1 set
Stacking jack : 1 set
End of line resistor
Standby Battery Set
: 2 unit
: 1 unit Industry
Spare fuse : 2 unit
Mains AC Power Cord, fitted with 13A BS 3 pin plug
MANUAL Ready
User / Operation Manual : 1 set
WARRANTY
Two (2) years warranty against manufacturing defects covering parts and labor.
GAD
Training
Equipment
Solution
Provider
Certified by: TUV NORD ISO9001.2015
© All rights reserved. Equipment fabricator reserves the right to make changes for better improvement with latest
technology available without notice. This publication shall not be liable for any tender, printing or typographical error.
[F] Automation
TECHNICAL SPECIFICATION
ORDER DETAILS
F1091 Standard model
F1091H Standard model with optional
features:
»» SCADA system
»» Industy 4.0 Technology
»» Augmented Reality (AR)
(Optional)
GAD
Training
Equipment
Solution
Provider
Certified by: TUV NORD ISO9001.2015
© All rights reserved. Equipment fabricator reserves the right to make changes for better improvement with latest
technology available without notice. This publication shall not be liable for any tender, printing or typographical error.