Professional Documents
Culture Documents
Specification of Home Elevator 2023
Specification of Home Elevator 2023
Specification of Home Elevator 2023
Safety Features
1. Install wear-resistant sleeves on rotating parts such as shaft pins to effectively extend the service life of
the equipment.
2. Protection and lack of phase protection settings and power failure emergency lowering device,
4. The home elevator is equipped with two travel switches at the lowest point and the highest point. When
the elevator reaches the required place, it will automatically stop.
5. This equipment is equipped with self-protection measures for the oil cylinder. In case the two stroke
switches fail at the same time, there is an oil drain hole at the bottom of the oil cylinder. When the maximum
height is exceeded, the oil cylinder will automatically drain oil without causing the plunger to rush out of the
oil cylinder.
6. Equipment speed limiter, safety gear and other safety measures.
7.With Electromagnetic lock on landing doors, when the door is open, can’t lift & down.
Principle of lifting
The home elevator is powered by a hydraulic pump station, input 380V or 220V power, the motor rotates to
drive the oil pump, inject hydraulic oil into the cylinder, and start the lifting platform to a predetermined
position, with a travel switch, which automatically stops. When descending, press the descending button and
the device will descend automatically.