Professional Documents
Culture Documents
210 G Tier Gen A Backhoe Loader PIN 1T0210G G 02263 Replacement Parts Guide
210 G Tier Gen A Backhoe Loader PIN 1T0210G G 02263 Replacement Parts Guide
MIU800650 3 3
5
10 9
12 8
6
Interval (hrs) - 500. 4
11
CAB RECIRCULATION FILTER ELEMENT
9
(IF EQUIPPED)
PRIMARY FUEL FILTER ELEMENT
RE195491
MIU802421 4
interval (hrs) - As Required.
Interval (hrs) - 500.
TRANSMISSION OIL FILTER ELEMENT
FINAL FUEL FILTER ELEMENT 10
AT466863
MIU805005 5
Interval (hrs) - 1000.
Interval (hrs) - 500.
HYDRAULIC OIL FILTER ELEMENT
ENGINE ROCKER ARM COVER GASKET 11
AT495722
MIU803967 6 Interval (hrs) - 1000.
Interval (hrs) - 1500.
FUEL TANK BREATHER FILTER
H216169
12
John Deere Hy-Gard™MFWD Front Axle Housing Oil1 6.5 L (1.7 gal)
(if equipped) 2000
John Deere Hy-Gard™ Rear Axle and Planetary 18.0 L (4.8 gal)
Oil (each side)1 2000
John Deere Hydrau™ Hydraulic Tank Oil 42.8 L (11.3 gal) 2000
T492278X019 Mar 2023. Release Date. *See operator’s manual for addional details.
Service intervals
210 G-tier, Gen-A Backhoe Loader (PIN: 1T0210G_ _ _G_02263)
As Required
□ Inspect and check tires pressure □ Check and add windshield washer fluid level (if equipped)
□ Check wheel fasteners' torque □ Lubricate non-powered front wheel bearings (if equipped)
□ Replace cab air and recirculation filters (if equipped) □ Replace primary and secondary engine air cleaner filter
elements
□ Check air conditioning system refrigerant charge and system □ Inspect and clean cooling system
oil charge
□ Drain water and sediment from fuel filters
□ Check hydraulic reservoir oil level □ Lubricate backhoe spring coupler (if equipped)
□ Check engine oil level □ Lubricate backhoe coupler mechanical jack (if equipped)
□ Lubricate loader pivot points □ Lubricate backhoe swing cylinder and pivots
□ Lubricate loader quick coupler (if equipped) □ Lubricate non-powered front axle steering pivots (if equipped)
□ Lubricate front axle pivot pin □ Lubricate mechanical front wheel drive (MFWD) front axle and
universal joints (if equipped)
□ Lubricate stabilizer pivots and cylinder pins □ Lubricate multi-purpose bucket (if equipped)
T492278X019 Mar 2023. Release Date. *See operator’s manual for addional details.
Service intervals
Every 1000 Hours
□ Check coolant condition □ Replace hydraulic reservoir breather
□ Clean, pack and adjust non-powered front wheel bearings □ Replace fuel breather
(if equipped)
□ Replace transmission oil filter □ Drain and refill transmission oil
□ Replace hydraulic oil filter □ Check automatic belt tensioner and belt wear
T492278X019 Mar 2023. Release Date. *See operator’s manual for addional details.