Alarm/Battery Box Connections: Instructions

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

alarm/battery box

Connections
INSTRUCTIONS
2789 Small alarm/battery Box 4002 large alarm/battery Box

Connection
Connection
to Alarm
to Alarm

to Lock
to Lock
Connect to Lock through
BAT Port.

Can be configured as NC or NO Can be configured as NC or NO


by changing the internal jumper. by changing the internal jumper.

2789 Alarm Cable Connections 4002 alarm Connections

4 Wires 26 AWG Alarm Relay Connections


Connect OUT to Alarm
Alarm Relay Connections Normally Open (NO) or Normally Closed (NC)
Red and Black Relay Contacts: Settable
Normally Open (NO) or Normally Closed (NC) 50V DC @ 250 mA Max Load
Relay Contacts: Settable Switches 1 sec.
50V DC @ 250 mA Max Load
Switches 1 sec. Remote Input to Disable or Override Lock
Connect IN to Remote Control
Remote Input to Disable or Override Lock 5-12V DC @ 20 mA Max Input
Yellow: Positive Input (+)
Green: Negative Input (-)
Lock Cable plug
5-12V DC @ 20 mA Max Input
Alarm Cable

Old Version
Relay

Input

Lock Relay Jumper Position


Alarm Relay Jumper Position
Cable plug NC (Right)
NC (Left)
NO (Left)
NO (Right)
Alarm Cable

New Version

Kaba Mas LLC


749 W. Short Street, Lexington, KY 40508 USA
Phone: (859) 253-4744 FAX: (859) 255-2655
Technical Support: (800) 950-4744
Lock NC (Above) www.kaba-mas.com
Cable plug NO (Below)

(P/N)743.049 Rev B 06/09 • © copyright 2009 Kaba Mas LLC


page 1 of 1

You might also like