Professional Documents
Culture Documents
5c9131233663b96f7b668081 - ATLOCK INSTALLATION GUIDE V1.3
5c9131233663b96f7b668081 - ATLOCK INSTALLATION GUIDE V1.3
5c9131233663b96f7b668081 - ATLOCK INSTALLATION GUIDE V1.3
MODEL NUMBER
LIMITED LIABILITY
BEFORE OPERATION OR MAINTENANCE SERIAL NUMBER The liability of Atlas during the warranty term is limited solely to
Before any operation or maintenance, carry the follow complete test: the repair or replacement of defective material or workmanship
INSTALLER
• The drive machine shall not be energized under any circumstances by an authorized Atlas dealer at its normal place of business
if any landing door is unlocked or opened. PURCHASE DATE during normal business hours. The warranty does not include
• Once installed, manual pressure in the door slab shall not open the any expense of, or related to, transport of the product to an Atlas
interlock contact.
dealer, or compensation for loss of use or inconvenience while
• Any component with sign(s) of fatigue, wear or alteration shall not
be put into service. the product is being repaired. Atlas reserves the right to improve
• Consult the elevator manufacturer to confirm compliance with the the design of any model without obligation to modify any model
elevator control before installing an Atlas ATLOCK™ Series Door previously manufactured. Atlas shall not be held liable for any
Interlock. other expense, loss or damage, whether direct or incidental,
• Consult local national codes and regulation for installation, wiring,
consequential or exemplary arising in connection with the sale or
and use of the door interlock. PLEASE SAVE THIS INSTRUCTION MANUAL AND YOUR SALES use of or inability to use the Atlas product.
RECEIPT FOR FUTURE REFERENCE.
2 3 4 1
BEFORE YOU START
2" LINE UP YOUR ATLOCK INTERLOCK 2" RIGHT HAND
LEFT HAND WITH THE TEMPLATE TO ENSURE THE INTERLOCK
INTERLOCK TEMPLATE HAS BEEN PRINTED TO
1 1/4" SCALE
1 1/4"
FOLD LINE
FOLD LINE
DRILL Ø 3 4''
8 1/2" 8 1/2"
STEP 5 STEP 5
MARK MOUNTING 7 1/2" 7 1/2" MARK MOUNTING
SCREW ON THE LAND- SCREW ON THE LAND-
FOLD LINE
ING SIDE KEY OPENING FOLD LINE ING SIDE KEY OPENING
DRILL DRILL
STEP 4 STEP 4
MARK MOUNTING MARK MOUNTING
SCREW HOLES ON KEY KEY SCREW HOLES ON
THE KEY MOUNTING 1 1/4" MOUNTING MOUNTING 1 1/4" THE KEY MOUNTING
TEMPLATE IMPORTANT TEMPLATE
TEMPLATE TEMPLATE
INSTALL THE INTERLOCK PER
LOCAL AUTHORITIES AND CODES.
1 3/8" 5/16" 5/16" 1 3/8"
7/8"
LANDING RUNWAY RUNWAY LANDING 7/8"