ENGINEERING GRAPHICS AND DESIGN GRADE 10 TASK DISCRIPTION
GRADE 10 ENGINEERING GRAPHICS AND DESIGN TASKS FOR THE YEAR
Task Description Total Workbook Study guide
INSTRUCTIONS Term 1 1. All the work of each chapter must be completed first, before the formal task is done. Task 1.1 Freehand drawing 10 p. 9 p. 2-3 – 2-32 2. The drawings must only be drawn on the drawing sheets in the printed A3 workbook p. 4-3 – 4-17 and not with CAD. Task 1.2 Geometrical construction 10 p. 25 and p. 3-3 – 3-12 3. Under no circumstances may the memorandum be seen, used or copied from. Task 1.3 Construction of an ellipse 10 p. 23 right p. 4-18 – 4-20 4. Take note: • Printed A3 workbook (provided by Impaq) Term 2 • Loosen the drawing sheets and draw the sketches on it. p. 5-3 – 5-30 Task 3.1 Mechanical castings 20 p. 41 • The page numbers of each formal task are indicated in the table to the right. and p. 5-34 – 5-50 p. 5-3 – 5-30 Task 3.2 Mechanical castings 20 p. 45 - 46 Due date Refer to my.Impaq for due dates. and p. 5-34 – 5-50 Method of assessment Memorandum Task 3.3 Isometric drawing 10 p. 55 p. 6-3,6-9 – 6-15 Contact Contact the education specialist at Impaq or send an email to Term 3 akademie@impaq.co.za. Task 5.1 Solid geometry 10 p. 78 p. 8-3 – 8-26. Important • Workbook • Final formal drawing documentation and • Study guide Task 5.2 Descriptive geometry 10 p. 85 p. 7-3 – 7-12 proof p. 11-3 – 11-16 Task 5.3 Floor plan 20 p. 102 Requirements • Standard drawing equipment for EGD is required to complete the and p. 11-18 – 11-29 task. p. 11-3 – 11-16 Task 5.4 Sectional elevation 20 p. 112 - 113 • A non-programmable calculator may be used. and p. 11-18 – 11-29 • The study guide may be used for reference. Task 5.5 Perspective drawing 10 p. 130 p. 6-20 – 6-25 Additional guidelines • Read the instructions and assignment thoroughly. p. 12-3 – 12-22 Task 5.6 Electrical diagram 10 p. 114 - 115 • All construction must be shown on the drawings, as well as all and p. 11-32 – 11-34 calculations where applicable. • Drawings must be neat and accurate. • Include the necessary information on the drawings and drawing sheets. • This is individual work.