Professional Documents
Culture Documents
Service Message
Service Message
I have typed the instructions below, which are for cabinets that require
a 'SERVICE DUE SOON' and those that are 'SERVICE DUE' to find out
which set of instructions to follow remove the mains power and re-apply after
30 seconds and note what the display shows.
1, Remove the mains power from the unit. (this is so that we start from a
known place).
2, Re-apply the mains after 30 seconds.
3, Press the ↵ (Enter) button.
4, Press the illuminant button.
5, Record in the log book the Data on the display.
6, Press the 'Enter' button.
7, Follow instructions on Display,
8, Press Esc.
9, Press Esc.
10, Scroll down until 'OPERATE' is displayed.
11, Press 'Enter'
12, Press the illuminant button.
1, Remove the mains power from the unit. (this is so that we start from a
known place).
2, Re-apply the mains after 30 seconds.
3, Press the ↵ (Enter) button.
4, Scroll down to 'SETTINGS', Press Enter.
5, Press Enter again.
6, Scroll down to 'LAMP SERVICE', Press Enter.
7, Press the illuminant button requiring a service (denoted by a 'pulsing' lamp
code).
8, Record in the log book the Data on the display.
9, Press the 'Enter' button.
10, Follow instructions on Display,