Professional Documents
Culture Documents
Engineering Graphics and Design 1/2 Grade 10 TASK 7.1 November Examination 2021
Engineering Graphics and Design 1/2 Grade 10 TASK 7.1 November Examination 2021
GRADE 10
TASK 7.1
INVIGILATOR INSTRUCTIONS
• The approved invigilator downloads the unique barcoded cover page from my.Impaq, signs it and attaches it to the front of the answer sheet for
marking purposes.
• The examination answer sheet and unique barcoded cover page must be submitted on my.Impaq for marking purposes, with the exception of EGD,
Dramatic/Visual Arts and CAT Practical*, where the invigilator/courier must submit a hard copy at Impaq’s offices by hand. *Practical papers must be
submitted by CD/flash drive.
• A copy of the answer sheet must be kept for any hard copy submissions.
Page 1 of 7 © Impaq
November Examination 2021
G10 ~ Engineering Graphics and Design P1/2
INSTRUCTIONS
NAME AND SURNAME
1. This paper consists of a cover page and FIVE sheets.
STUDENT
2. There are FOUR questions. Answer all the questions on the drawing sheets provided.
NUMBER
3. Plan your time carefully.
MARKS
4. Write your name in print in the title block on each drawing sheet. MARKS
ACHIEVED
5. Draw neatly and accurately.
6. Use your own discretion where dimensions or detail have been omitted. Question 1 30
7. All drawings must be drawn on a scale of 1:1, unless otherwise stated.
8. All the drawing sheets must be stapled in the correct order and submitted, irrespective Question 2 38
of whether the question was answered or not.
Question 3 38
Question 4 44
TOTAL 150
Page 2 of 7 © Impaq
COMPONENT SYMBOL DESCRIPTION QUESTION 1 (d): ELECTRICAL CIRCUIT DIAGRAM
_
1.5V + CELL GIVEN INFORMATION:
QUESTION 1: ANALYTICAL (CIVIL)
Figure 4 shows the simple electrical circuit that is
connected in series, as well as a table with the
SWITCH international symbols for some of the electrical and
electronic components.
RESISTOR INSTRUCTION:
LAMP
ANSWER QUESTION 1(d) IN THE PROVIDED SPACE (13 Marks)
LIGHT EMITTING
DIODE (LED)
FIGURE 4
_ _
1.5V + 1.5V +
½ Mark 1 Mark
ASSESMENT RUBRIC
Mark Mark achieved Mod
NGL
1 Question 1(a) 6
DOOR AND FRAME
DPC 2 Question 1(b) 8
FFL 3 Question 1(c) 3
4 Question 1(d) 13
TOTAL 30
QUESTION 2: SOLID GEOMETRY
GIVEN INFORMATION:
INSTRUCTIONS:
½ Mark 1 Mark
ASSESMENT RUBRIC
Mark Mark achieved Mod
1 Sectional top view 15
2 Right view 15
3 True shape 5
4 Hatching 2
5 Label 1
TOTAL 38
QUESTION 3:
TOP VIEW PERSPECTIVE DRAWING
GIVEN INFORMATION:
PP - PICTURE PLANE.
D=DOOR
HL - HORIZON LINE.
W5
W=WINDOW GL - GROUND LINE.
SP – STATION POINT.
W4 INSTRUCTIONS:
W3
Align the Worksheet with the HL or
W2 D1 W1 PP.
PP
Determine and label the vanishing
point showing all constructions.
Complete the one-point
perspective drawing showing all
constructions / projections.
No hidden detail required.
HL
SP ½ Mark 1 Mark
ASSESMENT RUBRIC
D1
Mark Mark achieved Mod
W5
W3
W4 W2 W1 1 VP and projections 5
GL 2 Roof 13
FRONT VIEW
3 Windows and door 12
4 Walls 8
TOTAL 38
WINDOW SCHEDULE
QUESTION 4: CIVIL DRAWING
1 000
1 500
the outside of the walls except when stated
X otherwise.
W2
(X)
D1 LINE INDICATES THE CENTRE LINE Incomplete foundation and wall detail.
ROOM 1 A window schedule and a door schedule.
OF AN INSIDE WALL.
(W1)
WINDOW INSTRUCTIONS:
6 500
A A FLOOR FINISH
All doors and windows.
ROOM 2 TILES All hatching detail.
ROOM 1: 1 000
ROOM 2: WOOD Label the rooms by showing the room designations
and the floor finishes.
1 350
Start at point A.
1 000
D2
A Draw the SECTIONAL ELEVATION on cutting plane A-A
1 400 to scale 1:10. Add the following features to the drawing:
4 600 The complete foundation and slab detail.
(W2) All hatching detail.
WINDOW Start at point B.
Label the following:
The sectional elevation.
Use the correct abbreviations when labelling the
following features according to standards: NATURAL
GROUND LEVEL, DAMP PROOF COURSE and
INCOMPLETE FOUNDATION
DOOR SCHEDULE FINISHED FLOOR LEVEL.
AND EXTERNAL WALL DETAIL
220 General
All substructures hatching may be drawn in freehand.
800 2 000 All drawings must comply with the guidelines and
graphical symbols contained in the SANS 10143.
500
PANEL
2 100
(D1) (D2)
DOOR SLIDING DOOR
250
B
700
½ Mark 1 Mark
ASSESMENT RUBRIC - FLOOR PLAN
Mark Mark achieved Mod
1 Walls 10
2 Windows and doors 8
3 Hatching 8
4 Labels 4
TOTAL 30
FOUNDATION TO FLOOR
Mark Mark achieved Mod
5 Foundation 7
6 Hatching 3
7 Labels 4
TOTAL 14
BIG TOTAL 44
A
B