Professional Documents
Culture Documents
Klauke Brochure
Klauke Brochure
Klauke Brochure
CATALOGUE
Electrical connection systems, Crimping and cutting tools,
Hydraulic Safety tools, Holemaking and universal tools,
Hand tools
Klauke.com
Our fields of expertise
Five sectors, one quality
We take your needs seriously. For us, “Made by Klauke” means
that all products are produced to the highest quality.
Tools Series 6 mm2 10 mm2 16 mm2 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2 500 mm2 630 mm2
K2 • • •
K05L • • • • • •
K06L • • • • • •
K09L • • • • • •
EKM60IDCFM • • • • • • • • • • •
EK50ML • • • •
EK354ML/CFM • • • • • • • • • •
EK505CFM • • • • • • • • • • • •
EK6022CFM • • • • • • • • • • • • •
EK12042CFM • • • • • • • • • • • • • •
EK135FTCFM • • • • • • • • • • • • • • • •
HK25/2 • • • • • • • • • • • • • •
3
Tubular cable lugs, F-series for fine stranded conductors
THE ONE
FOR ALL
Our tool recommandation for the perfect solution!
4
Aluminium & Bimetallic Lugs & Splices
mm2 mm2
Code M6 M8 M10 M12 M16 M20
stranded solid
10 -- 10 202R6 202R8
16 25 12 203R8 203R10
25 35 12 204R8 204R10
35 50 14 205R10 205R12
50 70 16 206R10 206R12
70 95 18 207R10 207R12
Tubular cable lugs Al
10 - 400 mm2 95 120 22 208R10 208R12 208R16
• Material/Surface: E-Al/bright 120 150 22 209R12 209R16
150 185 25 210R12 210R16 210R20
185 240 28 211R12 211R16 211R20
240 300 32 212R12 212R16 212R20
300 -- 34 213R16 213R20
400 -- 38 214R16 214R20
mm2 mm2
Code M8 M10 M12 M16 M20
stranded solid
16 25 12 363R8 363R10
25 35 12 364R8 364R10 364R12
35 50 14 365R8 365R10 365R12
50 70 16 366R8 366R10 366R12
70 95 18 367R10 367R12
95 120 22 368R10 368R12 368R16
Bimetallic cable lugs Al/Cu
16 - 300 mm2 120 150 22 369R12 369R16
• For connecting Aluminium cables to Copper 150 185 25 370R12 370R16 370R20
terminations 185 240 28 371R10 371R12 371R16 371R20
• Material/Surface: 240 300 32 372R10 372R12 372R16 372R20
E-Al, Copper acc. to EN 13600/bright
300 -- 34 373R12 373R16 373R20
Tools Series 10 mm2 16 mm2 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2 500 mm2
EK354CFM • • • • • • • • •
EK354ML • • • • • • • • •
HK6022 • • • • • • • • • • • •
EK6022CFM • • • • • • • • • • • •
EK12042CFM • • • • • • • • • • • •
EK135FTCFM • • • • • • • • • • • • •
5
Insulated Cable Connections
mm2 M3 M3.5 M4 M5 M6 M8
• 0.5 - 1.0 6203 62035 6204 6205 6206 6208
• 1.5 - 2.5 6303 63035 6304 6305 6306 6308
• 4-6 6504 6505 6506 6508
mm2 M3.5 M4 M5 M6 M8
• 0.5 - 1.0 620C35 620C4 620C5 620C6
• 1.5 - 2.5 630C35 630C4 630C5 630C6
• 4-6 650C4 650C5 650C6 650C8
mm2 2.8 x 0.5 2.8 x 0.8 4.8 x 0.5 4.8 x 0.8 6.3 x 0.8 7.7 x 0.5
• 0.5 - 1.0 8201 8201A 8202 8203 720 7208
• 1.5 - 2.5 8301 8301A 8302 8303 730 7308
• 4-6 8503 750
mm2 2.8 x 0.5 2.8 x 0.8 4.8 x 0.5 4.8 x 0.8 6.3 x 0.8
• 0.5 - 1.0 8201C 8201B 8202B 8203B 820
• 1.5 - 2.5 8302B 8303B 830
• 4-6 8502B 8503B 850
mm2 mm2
• 0.5 - 1.0 720V • 0.5 - 1.0 705
• 1.5 - 2.5 730V • 1.5 - 2.5 710
• 4-6 750V • 4-6 715
mm2 mm2
• 0.5 - 1.0 670 • 0.5 - 1.0 720AZ
• 1.5 - 2.5 680 • 1.5 - 2.5 730AZ
• 4-6 700 • 4-6 750AZ
mm2
• 1.5 - 2.5 1130
• 4-6 1150
6
Insulated Cable End-Sleeves
(please ask for other colour codes)
Insulated cable end-sleeves 0.5 - 50 mm2 acc. to DIN 46228 part 4
ST 11 B Pocket box with insul. cable end-sleeves ST 12 B Pocket box with insul. cable end-sleeves
0.5 - 2.5 mm2 acc. to DIN 46228 p. 4 4 - 16 mm2 acc. to DIN 46228 p. 4
Insulated twin cable end-sleeves 2 x 0.5 - 2 x 16 mm2 • For multi-purpose use of clamps
7
Crimping dies for Cu lugs and splices
Dies Series 6 mm2 10 mm2 16 mm2 25 mm2 35 mm2 50 mm2 70 mm2 95 mm2 120 mm2 150 mm2 185 mm2 240 mm2 300 mm2 400 mm2 500 mm2 630 mm2
HL46 HL410 HL416 HL425 HL435 HL450 HL470 HL495 HL4120 HL4150
L226 L2210 L2216 L2225 L2235 L2250 L2270 L2295 L22120 L22150 L22185 L22240 L22300
HL1310 HL1316 HL1325 HL1335 HL1350 HL1370 HL1395 HL13120 HL13150 HL13185 HL13240 HL13300 HL13400
13 series dies (above) used in the EK135FT tool for sizes 10 - 400mm2 with adapter UA15T (supplied with EK135FT tools) HL15500 HL15630
A2210 A221625 A221625 A2235 A2250 A2270 A2295120 A2295120 A22150 A22185 A22240 A22300
HA1310 HA131625 HA131625 HA1335 HA1350 HA1370 HA1395120 HA1395120 HA13150 HA13185 HA13240 HA13300 SA1826
Crimping dies for Inch Cu, Aluminium & Bimetallic lugs and splices
Dies Series 8 AWG 6 AWG 4 AWG 2 AWG 1 AWG 1/0 AWG 2/0 AWG 3/0 AWG 4/0 AWG 250 kcmil 300 kcmil 350 kcmil 400 kcmil 500 kcmil 600 kcmil 750 kcmil
KC128 KC126 KC124 KC122 KC121 KC1210 KC1220 KC1230 KC1240 KC12250 KC12300 KC12350 KC12400 KC12500 KC12600 KC12750
KA128 KA126 KA124 KA122 KA121 KA1210 KA1220 KA1230 KA1240 KA12250 KA12300 KA12350 KA12400 KA12500 KA12600 KA12750
8
Mechanical Crimping & Cutting Tools, Pumps
50 mm2
EK50ML 0.14 - 50 mm2 K2 0.75 - 16 mm2 K05L 10 - 70 mm2 K1 0.14 - 2.5 mm2 K3 0.5 - 16 mm2
• For interchangeable dies • Indent crimping K06L 6 - 120 mm2 • Trapezoid crimping suitable for • With wire cutter
• One-lever operation • With ratchet K09L 25 - 150 mm2 box terminals • For cable end-sleeves
• Automatic retraction • Mechanical crimping tools for • With wire stripping and cutting tool
• Hexagonal crimping
• Very low weight (0.96 kg) tubular cable lugs and • Spring-actuated tool opening
• Ergonomic 2-component handle
• Crimping force: 15 kN connectors
K271 10 - 50 mm2 K28 10 - 50 mm2 K82A 0.5 - 6 mm2 K507 0.5 - 6 mm2 K306K 0.08 - 16 mm2
K272 50 - 95 mm 2
2 x 4 - 2 x 16 mm 2
• Crimping of conductor and • Exchangeable dies integrated 2 x 0.5 - 2 x 6 mm2
• With ratchet • With ratchet insulation in one step in handle • With ratchet
• Trapezoid crimping • Trapezoid crimping • With ratchet 0.5 - 6 mm2 • Positioner for exact crimping
• For cable end-sleeves and twin • For cable end-sleeves and twin • For insulated cable connections results
cable end-sleeves cable end-sleeves 0.5 - 10 mm2 • For cable end-sleeves and twin
cable end-sleeves
0.5 - 10 mm2 • Hex crimp profile
K5 6 - 50 mm2 K130 max. dia 30 mm K118 max. dia 12 mm K1051 max. dia 26 mm K1061 max. dia 34 mm
K6 50 - 120 mm2 K150 max. dia 50 mm • For solid, stranded, • Length 350 - 520 mm extending K1062 max. dia 50 mm
K7 120 - 140 mm2 • Exceptional cutting performance fine stranded and super fine handles • High leverage (1-tooth system)
even with fine-stranded stranded conductors, • Also for fine stranded conductors • For earth, plastic and rubber
K07 185 - 400 mm2
conductors thanks to specially VDE 0295 class 1, 2, 5 and 6 e.g. VDE 0295 Class 5 cables
• For cable lugs Standard type • High cutting performance by • Hand-operated cutting tools for
designed, extremely sharp • Hand-operated cutting tools for
and fine-stranded conductors specially designed cutting blades Cu and Al cable
cutting blades Cu and Al cable
• Indent crimping
• Low-maintenance mechanical drive
HK6022 6 - 300 mm2 HK12042 16 - 400 mm2 HK120U 16 - 400 mm2 HSG45 max. dia 45 mm HSG852 max. dia 85 mm
• Two stage hydraulics • Very large crimping range to • H-head for deep groove crimps • Cuts armoured copper and • Cuts copper and aluminium
• Automatic retraction 400 mm² • 2-stage hydraulics aluminium cables and Al/St cables with lightweight steel
• Hand hydraulic crimping tool for • 2-stage hydraulics • for interchangeable dies series 13 cables (ACSR) armouring
interchangeable dies series 22 • for interchangeable dies series 13 • Also suitable for round material • 2-stage hydraulics
made of Al, Cu and steel • Cutting force: 60 kN
• Cutting force: 60 kN
9
Hand- & Battery-operated Crimping, Cutting & Universal Tools & Heads
150 mm2 150 mm2 300 mm2 240 mm2 300 mm2
EK354ML 6 - 150 mm2 EK354CFM 6 - 150 mm2 EKM6022CFM 6 - 300 mm2 EKM60IDCFM 16 - 240 mm2 EKM60UNVCFM 6 - 300 mm2
• For crimping dies series 4 • For crimping dies series 4 • For crimping dies series 22 • With 2-stage telescopic cylinder • One head for crimping, cutting
• Slim crimping head • Intelligent Pressing System „IPS“ • Intelligent Pressing System „IPS“ • No dies required and punching - one tool for all
• Automatic retraction • Slim crimping head • 18 V/1.5 Ah Li-Ion battery • 18 V/1.5 Ah Li-Ion battery • Ideal in the assembly field where
• 10.8 V/1.5 Ah Li-Ion battery • Automatic retraction • LED for workplace illumination • Intelligent Pressing System „IPS“ all common jobs can be carried
• Crimping force: 35 kN • Very-low weight (1.7 kg) • Crimping force: 60 kN • Crimping force: 30-60 kN out using one tool
• Crimping force: 35 kN
EK6022CFM 6 - 300 mm2 EK12042CFM 16 - 400 mm2 EK135FTCFM 10 - 630 mm2 EK135CFM 10 - 630 mm2 EK60UNVCFM
• For crimping dies series 22 • C-head with very wide crimping • Integrated pressure measure- • New head design • One head for crimping, cutting
• Two stage hydraulics range to 400 mm² ment with visual and audible • Light weigt and punching
• 18 V/4.0 Ah Li-Ion battery • Up to 60 % fewer crimps thanks signals in case of failure • No additional adapter needed • Manual retraction stop with
• Intelligent Pressing System „IPS“ to wide crimping in comparison • Two stage hydraulics „teach in“ (MRS+)
• Automatic retraction stop (ARS) to 6 t tools • Automatic retraction stop (ARS) • 18 V/4.0 Ah Li-Ion battery
• Crimping force: 60 kN • Crimping force: 120 kN • Crimping force: 135 kN
Ø 12 mm Ø 20 mm Ø 32 mm Ø 25 mm Ø 85/105 mm
EBS12ML max. dia 12 mm ES20ML max. dia 20 mm ES32ML max. dia 32 mm ESG25CFM max. dia 25 mm ESG85CFM max. dia 85 mm
• For cutting cable channels, bolts • Cuts multi-stranded copper and ES32FML max. dia 32 mm • For cutting Al/St conductors (ACSR), ESG105CFM max. dia 105 mm
and steel wire, medium hard aluminum cables • Cuts fine and superfine stranded for round material (Cu, Al, St) as well • Cutting head and bolt interlock
• 10.8 V/1.5 Ah Li-Ion battery • 10.8 V/1.5 Ah Li-Ion battery copper cables as armoured cables for highest safety for the operator
• Cutting force: 45 kN • Cutting force: 23 kN • 10.8 V/1.5 Ah Li-Ion battery • 18 V/1.5 Ah Li-Ion battery • Cutting force: 60 kN (85 mm) /
• Cutting force: 15 kN • Cutting force: 50 kN 120 kN (105 mm)
Cu/Al Cu/Al
armoured armoured
SDG105 max. dia 105 mm SDK120 max. dia 120 mm HK252SETHL25A13 16 - 630 mm2 AHP700L252SETHL PK252 16 - 630 mm2
• Hydraulic cutting head • Extremely wide cutting • HK 25/2 Hydraulic crimping (Crimping head PK252 included) • Hydraulic crimping head
• Cuts armoured copper and range up to 120 mm dia., tool with foot pump (two-stage • For crimping, with crimping die • For dies acc. to DIN 48083
aluminum cables also for fine-stranded cables hydraulics) set 16-630 mm2 sheet 3, series 25
• Cutting force: 120 kN (depending on cable type) • With crimping die set 16-630 mm2 • Multifunction LED for data • Crimping force: 250 kN
• For connecting to hydraulic • Safe operations due to high • Extremely wide cross section communication to PC • For connecting to hydraulic drive
drive unit with 700 bar ground stability by double range up to 630 mm² • 2x 18 V/3.0 Ah Li-Ion battery unit with 700 bar operating pressure
operating pressure handles • Crimping force: 250 kN • Operation pressure: max. 700 bar
10
KLAUKE ORANGE
WO
For even more safety, Klauke has now developed the
ST
world‘s first battery hydraulic crimping and cutting tools
with Tri-Insulation Barrier technology that provides users
LS
10 0 0
with 1.000V protection against electrical shocks.
OO
YT
V
N
Whether you work as a panel builder or in utilities: Think SU
R
LAT T TE
safe. Act safe. ED BA
Choose Klauke ORANGE for more safety.
Ø 20 mm Ø 25 mm Ø 32 mm Ø 35 mm Ø 50 mm
ES20ISM max. dia 25 mm2 ESM25ISM max. dia 25 mm2 ES32ISM max. dia 32 mm2 ESM35ISM max. dia 35 mm2 ESM50ISM max. dia 50 mm2
• For cutting Al/St conductors • For cutting Al/St wires (ACSR), • For cutting Al/St wires (ACSR), • For cutting Al/St wires (ACSR), • For cutting Al/St wires (ACSR),
(ACSR) to DIN EN 50182, solid Al/ round materials (Cu, Al, St) as round materials (Cu, Al, St) as round materials (Cu, Al, St) as round materials (Cu, Al, St) as
Cu cables to DIN EN 60228, Class well as armoured cables, and well as armoured cables, and well as armoured cables, and well as armoured cables, and
1 and laminated copper bus bars stay wires stay wires stay wires stay wires
• Cutting force: 23 kN • Cutting force: 67 kN • Cutting force: 67 kN • Cutting force: 67 kN • Cutting force: 67 kN
SSG max. dia 105 mm2 ASSG max. dia 120 mm2 ESSG max. dia 105 mm2
• SSG - Hydraulic safety cutting unit with foot pump • Battery powered hydraulic safety cutter • Battery powered hydraulic safety cutter
• Safety cutters for cutting live Cu/Al cables without steel • DGUV-approved safety cutter for cutting live Cu/Al cables • Safety cutter for cutting live Cu/Al cables which may carry
armouring with rated voltage up to 60 kV in the event of in case of failure voltage in case of a failure
a fault • Single-phase cables can be safely cut under voltage up to 110 kV • Single-phase cables can be safely cut under voltage up to 110 kV
• Single-core lives cables without steel armouring can be cut • Multi-phase cables can be safely cut under voltage up to 60 kV • Multi-phase cables can be safely cut under voltage up to 60 kV
under voltage of up to 110 kV/60 Hz • Very large opening width to 120 mm • Safe and fast operations by using a 10 m long safety
• Safe and fast operations by using remote control and 10 m hydraulic hose
long safety hydraulic hose
11
Hand Tools
VDE Side cutters VDE Cable cutters VDE Combination pliers VDE Telephone pliers, bent VDE Wire stripper
KL040160IS KL010210IS KL020180IS KL055205IS KL060160IS
• High cutting performance on • Stripping and cutting of copper • Holds flat and round material, • Serrated jaws, 45° angled • For single core and stranded
hard and soft wires and aluminum cables cuts hard and soft wires flat-round jaws cables up to 5 mm dia
• Length: 160 mm • Adjustable joint • With combination ring spanner • With wire cutter • With adjustment screw
• Length: 210 mm 11 – 17 mm (M8 - M10) • Length: 205 mm • Length: 160 mm
Engineers professional case, Socket head bit set 1/4“, Stripping tool 0.03 - 16 mm2 Cable stripper Electricians knife
15 pcs 28 pcs K433 K400 with straight blade KL745GK
KL905B15 KL361 • First stripping tool with a stripping • Exchangeable hooks, with hooked blade KL745HK
• Technicians notebook/tool bag • Ratchet 1/4“ range from 0.03 - 16 mm2 width 4.5 – 40 mm • Precise, fast and safe stripping
• Equipped with VDE and • 16 Bits, 1 Quick-change chuck • Integrated pinch protection • Stripping diameter max. of all standard round cables
standard tools • Smart handle • Easily replaceable blades 21/40 mm from 4 – 28 mm dia
• Material: Hard-wearing nylon • 2 Extensions 75 mm, 150 mm • Integratedd side cutter up to
max. 9 mm dia
V-cut U-cut
Automatic wire stripper Automatic wire stripper Torque screwdriver set Torque screwdriver set Torque screwdriver set
K43/2V 0.1 - 4 mm² K43/2U 4 - 16 mm² KL38715 0.6 - 1.5 Nm KL38830 1.5 - 3.0 Nm KL38954 3.0 - 5.4 Nm
• Self-adjusting cutting and stripping • Self-adjusting cutting and stripping • Easy torque adjustment using • Easy torque adjustment using • Easy torque adjustment using
tool for application-specific tool for application-specific an Allen key an Allen key an Allen key
solid and flexible cables solid and flexible cables • Precise release when reaching • Precise release when reaching • Precise release when reaching
• Ideal, lightweight and ergonomic • Ideal, lightweight and ergonomic the set torque the set torque the set torque
tool with a long service life tool with a long service life
• V cutting blades • U cutting blades
12
Holemaking Tools
50342916 Hydraulic punch driver 50342991 Hydraulic punch driver LS50FLEXCFM LS100FLEXCFM Hydraulic foot pump driver kit
Kwik Draw™ 7804E Kwik Draw 90™ 7904E Battery powered punch driver Battery powered punch driver 52084941
• Round punches up to ISO 63 • Round punches up to ISO 63 • Round punches 143.7 mm • St37 max.: 152.4 mm (3 mm) • With foot pump, hose and cylinder
(64 mm dia) (64 mm dia) (ST37 3 mm / VA 2 mm) • V2A max.: 104.8 mm (3 mm) • Round punches 143.7 mm
• Special shape punches up to • Special shape punches up to • Special shape punches • 18 V/1.5 Ah Li-Ion battery • Square punches 138 x 138 mm
max. 68 x 68 mm or 35 x 65 mm max. 68 x 68 mm or 35 x 65 mm 104.8 x 104.8 mm (ST37 2 mm) • Punching force: 100 kN • ST37 3.5 mm / VA 3.5 mm
• 18 V/1.5 Ah Li-Ion battery
• Punching force: 60 kN
Profile 1 Profile 2
35 x 7.5 mm 35 x 15 mm
Kwik Stepper Step bit set Drill/Tap Kit, Metric (POP) HSS bi-metal hole saw electro set DIN rail cutting tool Compact
50069900 50121510 52059295 SET 52055684
• Burr free drilling of steel sheets, • Hole drilling, tapping and deburring/ • Suitable for mild steel, cast iron, • For burr-free cutting and punching with less effort
pipes, non-ferrous metals, countersinking in one operation brass, aluminum, fibreglass, • With holes for workbench assembly
stainless steel and plastic • High Speed Steel (Size: M3-M10) wood and plastic • Includes cutting die set with 2 profiles
• Shank: 1/4 IN Quick Change Hex • Cutting depth: 40 – 45 mm
13
Bending, Cable Pulling & Fishing, Cable Preparation & Termination,
Test and Measurement, Shearing, Utility Hydraulic Tools, Knockouts,
Power Tool Accessories, General Purpose & Safety Tools
Distribution companies /
Sales offices
Middle East
Emerson Commercial &
Residential Solutions Klauke After Sales Service:
contacts on request
KLAUKE.COM/NEWSLETTER
© 2021 Gustav Klauke GmbH. All rights reserved. Subject to change without notice. The Emerson logo and Klauke logo
are registered trademarks of Emerson Electric Co. in the U.S. and other countries. BRMIDDLEEAST21GB 02/21 I
Follow us!