Professional Documents
Culture Documents
Senomio Subnetting
Senomio Subnetting
LABORATORY EXPERIMENT 5
Presented to
In Partial Fulfillment
Of the Requirements for the Degree in
Bachelor of Science in Electronics Engineering
Armones, Ronald
Billano, Joshua
Illorin, Lindell
Ramos, Princess
Conclusion:
Routing and sub-netting are 2 different things. Through the experiment we had few hours ago,
we have learned that we should properly connect each and every IP addresses correctly, manually. In
line with this, a mere mistake in encoding the IP address will lead to an unsuccessful delivery of
message/s. We need to encode the proper IP address, proper subnet masks and device connections. For
instance, proper router to router connection needs right IP address and subnet mask with respect to the
range of its subnet. We learned it the hard way by troubleshooting and we also did not forget to add the
right Ethernet porting. To add to this, the router’s routing must also be done correctly, for instance, in
the “ROUTING”, the static route must be done correctly. Right network address and mask is needed in
Thank you for reading all the way here and have a good day! <3