Professional Documents
Culture Documents
Prioritaria Direccion
Prioritaria Direccion
Prioritaria Direccion
Page 1 of 2
Cerrar SIS
Pantalla anterior
Pruebas y Ajustes
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Número de medio -SENR1272-01 Fecha de publicación -01/03/1999 Fecha de actualización -09/10/2001
i01076245
1. Install one 6V-4143 Coupler Assembly to each end of each 6V-3014 Hose Assembly .
Illustration 1 g00564071
(1) Tap for the system pressure.
2. Install one 8T-0852 Gauge with a range of 0 to 40000 kPa (0 to 5800 psi) to the hose. Install the
hose to the tap for the system pressure (1) .
3. Start the engine. Keep the machine in NEUTRAL. Keep the parking brake engaged.
5. Turn the steering wheel in both directions until the relief valve opens. Note the indication on the
gauge. The correct relief pressure setting is 17250 ± 350 kPa (2500 ± 50 psi).
Note: There may be air in the signal network, if there is a hesitation before reaching the relief
pressure. Purge the signal lines of the air.
https://127.0.0.1:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 03/11/2009
416C Backhoe Loader Center Pivot, Parallel Lift 1WR00001-08115 (MACHINE) POWE... Page 2 of 2
Note: The inlet check valve for the metering pump prevents steering kickback. Steering kickback
requires replacing the inlet check valve.
6. If the relief pressure is correct, then go to Step 7. If the relief pressure is not correct, then the
steering relief valve needs adjusting.
Illustration 2 g00564095
(2) Steering Relief Valve. (3) Locknut. (4) Adjustment screw.
c. Turn the adjusting screw (4) clockwise in order to increase the pressure. Turn the adjusting
screw (4) counterclockwise in order to decrease the pressure.
Copyright 1993 - 2009 Caterpillar Inc. Tue Nov 3 18:32:56 EST 2009
Todos los derechos reservados.
Red privada para licenciados del SIS.
https://127.0.0.1:8443/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 03/11/2009