Professional Documents
Culture Documents
mc316 Démontage Pompe Hyd
mc316 Démontage Pompe Hyd
mc316 Démontage Pompe Hyd
11. Remove bolt (34) and lever (35) from valve group (2).
Illustration 9 g00902827
13. Remove clutch hub (38) from the pump drive shaft.
14. Remove bolts (36). Remove flange (39) fr om the main hydraulic pump.
Illustration 10 g00902833
15. Remove O-ring seal (40) from the bac side of flange (39).
Illustration 11 g00902844
Illustration 12 g00902845
3TYJ The seat adustment gr oups (43) and (44) ill come apar t as pump adapter (41) is being
removed from the main hydraulic pump. To prevent mixing of parts, sloly r emove pump
adapter (41).
16. Remove bolts (42). Remove pump adapter (41).
Illustration 13 g00902859
Illustration 14 g00902860
17. Remove seat aduster gr oup (43). Remove rod (47), piston (46), and spring (45).
Illustration 15 g00902869
Illustration 16 g00902872
18. Remove rod (51) from piston (49).
Illustration 17 g00902888
20. Mar the position of por t plate (52) in relation to the pump adapter. Remove port plate (52) from
pump adapter (41).
Illustration 18 g00902892
Illustration 20 g00902898
23. Remove bolts (56) from plate (57). Remove plate (57) from main hydraulic pump (1).
Illustration 21 g00902909
24. Mar the position of the maximum angle st op scre (58) prior t o removal from the main
hydraulic pump (1). Remove maximum angle stop scre (58). Repeat for the opposite side of
the main hydraulic pump.
Illustration 22 g00902972
25. Remove O-ring seal (61). Remove sashplate (60) and barr el assembly (59) as one piece.
Illustration 23 g00902981
Illustration 24 g00903667
3TYJ Mar barr el (66), pistons (61), and sashplate (60) for orientation.
26. The sashplate must be heated in or der to melt the thread loc . Remo ve bolts (65) from
sashplate (60).
3TYJ olts (65) should be r eplaced ith ne bolts.
Illustration 25 g00903053
Illustration 27 g00903180
Illustration 28 g00903181
32. Remove cup springs (68) and shims (69) from barrel (66).
3TYJ Mar orientation of cup springs (68) and shims (69) for installation.
Illustration 29 g00903182
33. Remove plugs (70) and slotted pins (71).
Illustration 30 g00903209
Illustration 31 g00903210
Illustration 33 g00903222
Illustration 34 g00903243
42. Remove bearing (80) from shaft (78). Use a suitable press to remove bearing (80).
PPI-0002D077
2023/02/24
16:21:46+01:00
i01854097
© 2023 Caterpillar Inc.