Professional Documents
Culture Documents
Mde-088 Man en
Mde-088 Man en
Mde-088 Man en
TYPE MDE-088
INSTRUCTION AND USER MANUAL
- 8 INPUTS
- 8 OUTPUTS }
Two groups of 4 with common
connected to negative or positive
• Continuous or alternate power
PARMA ® ITALY
24Vac ± 10%
up to 32Vdc
Common
Common
32 VDC
DIP 4 Description
32 Vdc
Rs485
Power
Inputs
Input
up to
up to
configuration OFF If no data is received
or
it maintains the
DIP 3 Data format 1 2 C3 4 5 6 7 C8 9 10 11 12 outputs unvaried
OFF E, 8, 1
ON N, 8, 1 Power ON If no data is received
after 1 second it
DIP 2 DIP 1 baud-rate switches off the
OFF OFF 4800 Led
OFF 9600 outputs
ON 4 5 6 7 9 10 11 12
ON OFF 19200
ON ON 38400 ON
Baud-rate Power powered
1234 Rx reception
Module address Serial
configuration address Tx transmission
16 17 18 19 21 22 23 24
Led
RS 485
+ -
84 85 C15 16 17 18 19 C20 21 22 23 24
Common
Common
1A MAX
1A MAX
Output
Output
Shielded
cable
CONTROL UNIT
connect)
GND (Do not
RS 485 +
RS 485 -
84 85 86
2 MDE-088 EN
RS485 CONFIGURATION
The RS485 port is used to communicate with other RS485 devices and create a network that
can be reconfigured to suit installation needs. The baud rate is set by two dip switches (1 and 2).
It is possible to select (even) or no (none) parity from dip switch 3. Default settings are: 9600, e, 8, 1.
The settings can be modified at any time, it is not compulsory to switch the module off.
The protocol used is ModBus / RTU.
MDE-088 EN 3
ORDERING INFORMATION
TYPE
MDE-088 Code 00242269
4 MDE-088 EN