Professional Documents
Culture Documents
Anya Zoe Patterns - Wall-E ENG
Anya Zoe Patterns - Wall-E ENG
Materials: #anyazoepatterns
3.75mm crochet hook, poly-fil, scissors, plastic yarn needle, metal yarn needle, hot
glue gun with glue, brown acrylic paint, white acrylic paint, black acrylic paint,
green acrylic paint, stiff black felt, stiff brown felt, dark gray felt, red felt, reddish
brown (rust color) chalk, paintbrush, gold yarn, brown yarn, jewelry wire,
TRESemme freeze hold hair spray (to seal the chalk)
2
Wheels: Back of eye:
*Rows; brown yarn *Rounds; brown yarn
1. Ch 24 (24) 1. Create a ring with 8 sc (8)
2-4. 1 sc (24) 2-6. 1 sc (8)
*Cut three rectangle pieces of the stiff brown felt 7. Dec three times (5)
for each wheel; six pieces total. Use hot glue to *Make two of these; one for each eye. Fill with
attach. You should now be able to fold the wheel small amount of polyfil, then hot glue to back of
into a triangle shape, then stitch ends together eyes. See photos.
and hot glue to body.
Eye center:
Wheel gears: *Rounds; brown yarn
*Rounds; brown yarn 1. Create a ring with 4 sc (4)
Large gear: 2-6. 1 sc (4)
1. Create a ring with 6 sc (6) 7. Dec one time (3)
*Make one for each wheel, total of two. Use hot *Hot glue to top part of neck, then glue one eye
glue to attach to inside of wheel toward the front, to each side. Make sure to use enough glue or
bottom corner. else it will be wobbly. See photos.
Small gear:
1. Create a ring with 3 sc (3) Wires:
*Make two for each wheel, total of four. Use hot *Rows; brown yarn
glue to attach to inside of wheel in the remaining 1. Ch 8 (8)
corners. *Make two of these; Stitch or use hot glue to
attach to back of head. See photos.
Bottom corner edges:
*Rows; brown yarn Hands:
1. Ch 5 (5) *Rows; brown yarn
2. 1 sc (5) Fingers:
*Make four of these. Hot glue one to each 1. Ch 8 (8)
bottom corner of the body panel. There will be 2-3. 1 sc (8)
two in the front of his body and two in the back. *Make two of these for each hand, total of four.
Cut two rectangle pieces from the stiff brown felt
Eyes: for each finger, then hot glue. See photos.
*Cut the eye shape out from the felt (page 8), Finger center:
four from the stiff black felt and two pieces from 1. Ch 2 (2)
the dark gray felt. Glue each of the gray pieces 2. 1 sc (2)
to two of the stiff black pieces. You should now *Make two of these, one for each hand. Hot glue
have four pieces total; the glued paires and the in between each finger. See photos.
other two stiff black pieces. Thumb:
*Rows; brown yarn 1. Ch 4 (4)
1. Ch 16 (16) 2-3. 1 sc (4)
2-4. 1 sc (16) *Make two of these, one for each hand. Hot glue
*Make two of these. Use hot glue to attach the to inside of hand. See photos. Once you have
felt eye pieces. You will have to stretch the yarn completed this step, your hand is finished and is
to make sure it fits all the way around, then stitch now ready to be glued to the arm. Make sure to
the ends together where they meet at the top, use enough glue, so that it isn’t wobbly.
inside part of the eye. The black pieces will be
the back of the eye and the gray pieces will be
the front of the eye. See photos.
3
*Body panels; I used stiff white
felt, but you can use any color.
*Computer panels
*Rim
*Neck
4
*Shoulder
*Arm
*Wrist
*Wheels
5
*Eyes
*Wires
*Back of eye
6
*Fingers
*Fingers
*Finger center
*Thumb
*Hand
Shave off some of the rust colored chalk, then use a paintbrush to brush it all over the gold areas
of his body. Use a reference photo if you need to for what areas have more rust on them. Use hair
spray to seal it.
7
Felt pieces:
*Please note, these pieces were made specifically for my amigurumi. You may have to alter
the size of your pieces if your amigurumi ends up being larger or smaller than mine.
*Don’t forget to paint “Wall-e” on the front body panel. Use the black acrylic paint for the “wall”
and the white acrylic paint for the “e”. The “e” will be painted over top of the red felt and the
“wall” will be painted directly onto the front panel. See photos.
*Eye; (x4) stiff black felt, (x2) dark gray felt; hot glue two
of the dark grey felt pieces to the stiff black pieces. The
other two black pieces will be the back part of the eye
and the two grey/black pieces will be the front part of the
eye.