Professional Documents
Culture Documents
HAhaha
HAhaha
HAhaha
INTEGRATED LEVEL
TEACHER LORENZ FAULINE LEARNING TLE –
EVANGELIO AREA Technical
Drafting
TEACHING Nov 30- Dec 1, 2023 QUARTER 2nd Quarter
DATES & TIME
TEACHING DATES & TIME November 30, 2023 Dec 1, 2023
Einstein: 12:20-1:10
Rutherford: 1:10-2:00
Roentgen: 2:00-2:50
Darwin: 2:50-3:40
Edison: 5:00-5:50
I. OBJECTIVES
A. Content Standards The learners demonstrate understanding of concepts and underlying
principles in the preparation of CAD.
B. Performance Standards The learner shall be able to prepare CAD based on established industry
and/or job requirements.
C. Learning Competencies/ LO 1. Operate CAD software and computer hardware.
Objectives A. Demonstrate basic understanding about draw commands/ Basic Tools
(Hatch)
B. Familiarize the flow of commands for each draw tool
C. Draw basic shapes through the use of draw command
II. CONTENT Explore CAD working environment: Operate CAD software and identify
features according to the software Provider.
III.LEARNING RESOURCES
A. REFERENCES
1.Teacher’s Guide Pages ICT-TD GRADE 10
First Quarter- Module 1 and 2
2. Learner’s Materials Pages
3.Textbook Pages
4.Additional Materials from
Learning Resource (LR)
portal
B. Other Learning Pen, notebook, Computer Desktop with AutoCAD Application
Resources/Materials
IV.PROCEDURES TEACHER’S ACTIVITY STUDENTS’ ACTIVITY
A. Preparatory Before we start, _________, please
Activity/Reviewing previous lead us in prayer. Classmate are you ready to pray?
lesson or presenting the new
lesson Yes, we are.
*Prayer*
B. Establishing a purpose for the At the end of the lesson, you are
Prepared By: Checked By: