Professional Documents
Culture Documents
A Density
A Density
E – STP – 01 – 01
Lab Ref. No: ____________ FOAR innovative Technologies (Pvt) Ltd.
Apparatus: -
Density container
Weight balance
Water bath
Thermometer
Test Procedure: -
Weight the density container and record as tare weight.
Check the temperature of emulsion by using thermometer.
If it is above the 25 ºC, stir the emulsion specimen and place in the 25 ºC water bath for
minimum 2 hrs. until the specimen temperature reaches at 25 ºC.
After that remove the specimen from water bath and stir until homogeneous.
Avoid trapping air in the specimen during stirring.
Carefully fill the density container with the emulsion, avoiding the entrapment of air.
Vibrate the cup until no further change in volume occurs and remove the excess emulsion
with clean rag.
Weight the density container with emulsion and record as weight of emulsion.
Calculation: -
Weight of Container (W1) = _________________kg.
Density = _______________kg/liter.
Result: -
Density =__________________kg/liter.
Compliance: -
Lab In-Charge:
Test Performed By:
Test Date: