Professional Documents
Culture Documents
E-17-16130-VFD-Version 2.0
E-17-16130-VFD-Version 2.0
E-17-16130-VFD-Version 2.0
TECHNICAL SPECIFICATIONS
1.0 Reference Standards
Specification Standard 1.01 BS EN/IEC/UL 61800-2/61800-3/UL508C
1.02 Motor in Hazardous Area? (BS EN/IEC 60079-
14 applies) (Y/N)
1.03 Utilisation Category – “Pumps”
1.04 CE – Marking (Y/N)
2.0 Test Certificates
Certificate Numbers and 2.01 ASTA / KEMA / DNV / LRS / GL / BV / UL / CSA
Date of Issue / TUV
2.02 Routine Tests / Factory Tests
2.03
3.0 Electrical Data
VFD (Open) 3.01 Location – Tag No.
3.02 Rated Insulation Voltage (Ui)
3.03 Rated Operating Voltage (415V/3Phase)
3.04 Rated Impulse Voltage (Uimp)
3.05 Rated Operating frequency (50Hz)
3.06 Rated Current at 50°C – AC3/415V (Ie)
3.07 Control Supply Voltage (110V/50Hz)
3.08 Type 2 co-ordination (Y/N)
3.09 Aux. Contacts configuration – NO/NC
3.10 I/O configuration
3.11 Current limit (0-100% Adjustable)
VFD (Standalone) 3.12 Overload capacity (110%)
3.13 Acceleration Rate
3.14 Deceleration Rate
3.15 Minimum speed (0-100% adjustable)
3.16 Maximum speed (0-100% adjustable)
3.17 Speed Regulation (Open/Close loop)
3.18 Transient/Voltage surge protection (Type)
3.19 RC Snubber network protection (Y/N)
3.20 Serial Communication
3.21 Communication protocol
3.22 IP Rating (IP42/IP54)
3.23 Method of Cooling
3.24 Overload and Short-circuit protection devices