Professional Documents
Culture Documents
Kbe - Fire Damper
Kbe - Fire Damper
MODEL K75
TYPE B
UL CLASSIFIED 1-1/2 HOURS RATING
ORDER HEIGHT
FEATURES.
*Each damper is marked with a 1-1/2 hours UL 555
MODEL K75 BH Classified fire damper label.
*Meets all UL and NFPA criteria for primary fire
dampers in walls and floors with fire resistance ratings
OVERALL HEIGHT of less than 3 hours.
D A M P E R
APPLICATION ORDER HEIGHT
DAMPER SUPPLIED 1/4" (6mm)
MODEL K75 IS APPROVED FOR USE IN WALLS, LESS THAN ORDER HEIGHT
F I R E
HEIGHT LESS 1/4" (6mm).
DA
ER OR
MP
FRAME. TH SUPP DE
AN LI R
OR ED WI
DE 1/4” DT
4-1/4" (108mm) Maximum X 22 (0.85mm) gauge R W (6
ID mm)
TH LE
H
SS
Galvanized steel channel.
BLADES.
22 (0.85mm) gauge Galvanized steel curtain type out of
the air stream.
VARIATION.
FINISH. All UL Classified fire dampers must be fabricated in
Mill. accordance with UL procedures. Available variation are
limited to those incorporated in the approved procedures.
CLOSURE SPRINGS. Approved variations available at additional cost are :
301 Stainless Steel Spring. (For Horizontal mount only, *Factory furnished sleeves.
optional on vertical mount) Sleeves are available in 10 (3mm) through 20 (1mm)
gauge steel and in lengths required for the specific
FUSIBLE LINK.
4-1/4"
(108mm) application.
Standard 165° F ( 74° C). Other available.
NOTES.
MOUNTING.
O VERALL D AMP ER HEI G HT
MODEL
than given duct dimension
MINIMUM SIZE. K75 BV * Refer to the KBE Installation Instruction and supple-
Vertical & Horizontal Installation: ments for complete installation details.
4"Wx 4"H (100 x100mm).
(V) VERTICAL MOUNT
MAXIMUM SIZE.
SSIF
Single Section Vertical & Horizontal Installation: LA IE UNDERWRITERS LABORATORIES (UL 555)
CLASSIFIED FIRE DAMPERS.
UL
D
C
"P"
"O" "H"
"O" Over-all
MODEL K75 TYPE (B) Duct
"H" Height Conection
(Order
Height)
www.kbeinternational.com
Ref : FD ALL STATED SPECIFICATION ARE SUBJECTED TO CHANGE WITHOUT NOTICE OR OBLIGATION. KBE 2018