Professional Documents
Culture Documents
Roof Mounted - Power Bushing Brochure II
Roof Mounted - Power Bushing Brochure II
Cantilever Test
Top Transverse Force Bottom Transverse Force
HV Bushing Reference
Static Values (lbf) Static Values (lbf)
8.7kV - Power Bushing Series 200 - Passed 200 - Passed
15kV - Power Bushing Series 200 - Passed 200 - Passed
23kV - Power Bushing Series 200 - Passed 200 - Passed
H-J Enterprises, Inc.
34.5kV - Power Bushing Series 200 - Passed 200 - Passed
3010 High Ridge Blvd High Ridge, Missouri USA 63049
46kV - Power Bushing Series 200 - Passed 200 - Passed Tel: (636) 677-3421 Fax: (636) 376-1915
Conclusion www.h-jenterprises.com
The H-J Enterprises bushings provided acceptable test results exceeding the parameters as specified in ANSI/IEEE
C57.19 and could be used for their respective voltage classes in liquid filled Transformers, Reclosers, Voltage
Regulators, Switchgear and other special power apparatus.
H-J Enterprises, Inc. H-J Enterprises, Inc. 3010 High Ridge Blvd High Ridge, Missouri, USA 63049 Rev: 1 Dated: 05/29/2007
File: NEW Power Bushing Brochure II Tel: (636) 677-3421 Fax: (636) 376-1915
Web: www.h-jenterprises.com
5KV – 46KV CLASS POWER APPARATUS BUSHINGS Hardware & Accessories for Power Class Bushing Assemblies
higher voltage ratings apply. the bushing gasket surface. The bush- torque values
Line Terminal Caps Gaskets
Terminal Caps are available in Tin Plated Replacement gaskets are
8.7kV Class Power Bushing Assemblies Bronze with eyebolt or spade type configu- available in highly resilent
rations. They are installed on the top of Buna-N and Viton rubber
8.7kV 95kV BIL bushings where the primary feeder line material.
Creep 10.50” Strike 6.13” comes into the equipment.
Recommended Tank Hole Diameter 4.0”
Eyebolt Style Terminals Conductor Studs
Eyebolt style terminals are cast from elec- Replacement conductor
trical Bronze and can be furnished with or studs are supplied in Full
without Tin Plating. Primarily designed to Hard C110 Copper and Alu-
connect a cable with vertical or horizontal minum material. Tin or Sil-
takeoff to the bushing stud. The eyebolt pro- ver Plating is available.
vides an expedient way to make a connec- Sizes range from ¼” to 4.00"
tion while providing a high pullout resistance. in diameter and multiple
lengths. Studs can be ma-
chined to the customers
specification or to
Lead Blocks accomidate one of the
Lead Blocks are available in Copper and avaliablebrass terminals.
Aluminum with and without hardware; they
can also be made with a threaded center
hole to match the threads on the bottom of
the bushing. These lead blocks create a
good contact surface for welding or bolting
leads to be perpendicular to the center con-
ductor on the bushing.