Professional Documents
Culture Documents
Wqip d3 Mir Mec 0005, V0
Wqip d3 Mir Mec 0005, V0
Wqip d3 Mir Mec 0005, V0
This is to Certify that the items listed below have been released for shipment
NOTE: This Certificate does not relieve the Seller / Manufacturer/ fabricator of their contractual responsibilities with
regard the quality of structural items delivered. The items shall be fit for the use and purpose intended.
PIPES
Recommended By:
__________________
Name: Binu Thankachan
Title: Quality Inspector
Note: This report is issued by the Company under its General Conditions for Inspection and Testing Services (copy available upon
request). The issuance of this report does not exonerate buyers or sellers from exercising all their rights and discharging all their
liabilities under the Contract of Sale. Stipulations to the contrary are not binding on the Company. The Company’s responsibility
under this report is limited to proven negligence and will in no case be more than ten times the amount of the fees or commission.
Except by special arrangement, samples, if drawn, will not be retained by the Company for more than three months.
© SGS Société Générale de Surveillance SA – 2021 – All rights reserved - SGS is a registered trademark of SGS
Société Générale de Surveillance SA
Page 1 of 1
INSPECTION REPORT
Inspection Report No.:S SGS-JUB-M-23-010
SGS Inspection Services Saudi Arabia Ltd.
SGS Job No.: 50027601
P.O. Box 725, Jubail - 31951
Date: 01/01/2023
Kingdom of Saudi Arabia
Tel: +966 13 340 0044 Fax: +966 13 342 0212
Inspection Details:
Witness, In-Process and Final Inspection for the production of Ductile Iron
Pipes DN 1000 C25 ZBCM. as per the ITP for the listed Quantity in section 1
Inspection scope: -Material/Equipment detailed.
Items:
Personnel on Site: • Binu Thankachan - Inspector- SGS
• Mr. Abdullah Abdulaziz Abu Madayni – QA/QC Manager – SADIP
• Mr. Noor Mohammed Abdul Rauf - Quality Control Crew Leader - SADIP
© SGS Société Générale de Surveillance SA – 2021 – All rights reserved - SGS is a registered trademark
of SGS Société Générale de Surveillance SA
Page 1 of 7
INSPECTION REPORT
Inspection Report No.:S SGS-JUB-M-23-010
SGS Inspection Services Saudi Arabia Ltd.
SGS Job No.: 50027601
P.O. Box 725, Jubail - 31951
Date: 01/01/2023
Kingdom of Saudi Arabia
Tel: +966 13 340 0044 Fax: +966 13 342 0212
The test results (Final Dimension, Mechanical testing, Pressure, Zinc coating,
Bitumen coating, internal cement mortor lining,Bore Dia after lining are in
compliance as per standards to which the materials have been manufactured.
PIPE
AS PER ITP
0020 Dimensional
Visual
External dia
Wall Thickness
Straightness Satisfactory
Length
Ovality
© SGS Société Générale de Surveillance SA – 2021 – All rights reserved - SGS is a registered trademark
of SGS Société Générale de Surveillance SA
Page 2 of 7
INSPECTION REPORT
Inspection Report No.:S SGS-JUB-M-23-010
SGS Inspection Services Saudi Arabia Ltd.
SGS Job No.: 50027601
P.O. Box 725, Jubail - 31951
Date: 01/01/2023
Kingdom of Saudi Arabia
Tel: +966 13 340 0044 Fax: +966 13 342 0212
Tensile Strength
Elongation Satisfactory
Brinell Hardness
Conclusion:
The Above-mentioned pipes is inspected as per BSEN 545, ISO 2531, Project
specification and found to be satisfactory.
inspection was carried out as per ITP and SGS scope of inspection found confirming
to the applicable specification and Purchase order requirements.
© SGS Société Générale de Surveillance SA – 2021 – All rights reserved - SGS is a registered trademark
of SGS Société Générale de Surveillance SA
Page 3 of 7
INSPECTION REPORT
Inspection Report No.:S SGS-JUB-M-23-010
SGS Inspection Services Saudi Arabia Ltd.
SGS Job No.: 50027601
P.O. Box 725, Jubail - 31951
Date: 01/01/2023
Kingdom of Saudi Arabia
Tel: +966 13 340 0044 Fax: +966 13 342 0212
• ITP
• ISO 2531
• BS EN 545.
• ISO 4179,2531
• Manufacturer pipe system Catalog
5. Activities performed
The following inspection activities were performed during inspection with following result:
As Mentioned in para-1
6. Documentation review
The following documents were reviewed during inspection:
• ITP-
• Mechanical test reports .
• Hydrotest Reports
• Coating and Lining Reports.
• Zinc/Zinc- coating Mass Report.
• Dimensional Reports
7. Deviations / Non-Conformities
The following non-conformance/deviation was found during inspection:
- None
© SGS Société Générale de Surveillance SA – 2021 – All rights reserved - SGS is a registered trademark
of SGS Société Générale de Surveillance SA
Page 4 of 7
INSPECTION REPORT
Inspection Report No.:S SGS-JUB-M-23-010
SGS Inspection Services Saudi Arabia Ltd.
SGS Job No.: 50027601
P.O. Box 725, Jubail - 31951
Date: 01/01/2023
Kingdom of Saudi Arabia
Tel: +966 13 340 0044 Fax: +966 13 342 0212
8. Conclusion
The test results (Final Dimension, Mechanical testing, Pressure testing,Zinc coating, Bitumen coating,
internal cement mortor lining) are in compliance with latest technical standards to which the materials have
been manufactured.
The Pipes and Fittings produced for the Order 11202511 are in accordance with the Manufacturer Catalog
and ISO 2531 requirements.
9. Attachments
• Attachment-01 Inspection Test Reports.
• Attachment-02 Callibration Certificates.
• Attachment-03 Inspection Release Certificate
10. Pictures
© SGS Société Générale de Surveillance SA – 2021 – All rights reserved - SGS is a registered trademark
of SGS Société Générale de Surveillance SA
Page 5 of 7
INSPECTION REPORT
Inspection Report No.:S SGS-JUB-M-23-010
SGS Inspection Services Saudi Arabia Ltd.
SGS Job No.: 50027601
P.O. Box 725, Jubail - 31951
Date: 01/01/2023
Kingdom of Saudi Arabia
Tel: +966 13 340 0044 Fax: +966 13 342 0212
© SGS Société Générale de Surveillance SA – 2021 – All rights reserved - SGS is a registered trademark
of SGS Société Générale de Surveillance SA
Page 6 of 7
INSPECTION REPORT
Inspection Report No.:S SGS-JUB-M-23-010
SGS Inspection Services Saudi Arabia Ltd.
SGS Job No.: 50027601
P.O. Box 725, Jubail - 31951
Date: 01/01/2023
Kingdom of Saudi Arabia
Tel: +966 13 340 0044 Fax: +966 13 342 0212
EXPENDITURE REPORT
VISIT DATE Description TOTAL hours
Witness and Inspection for the production of Ductile Iron
01 Jan 2023 10
Pipes Timing includes travel and reporting
End of Report.
“This document is issued by the Company under its General Conditions of Service accessible at http://www.sgs.com/terms_and_conditions.htm. Attention
is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein.
Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of
Client’s instructions, if any. The Company’s sole responsibility is to its client and this document does not exonerate parties to a transaction from exercising all their
rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful,
and offenders may be prosecuted to the fullest extent of the law.
The issuance of this report does not exonerate the buyers or sellers from exercising all their rights and discharging all their liabilities under the Contract of Sale.
Stipulations to the contrary are not binding on the Company. The Company’s responsibility under this report is limited to proven negligence and will in no case be more
than ten times the amount of the fees or commission. The SGS stamp and signature are for test observation purposes only and is subject to the provisions of the SGS
General Conditions of Services (particularly article 2(d)) available at http://www.sgs.com/terms_and_conditions.htm. The company is neither an insurer nor a
guarantor and disclaims all liabilities in such capacities.”
“In accordance with Client’s instructions, the Company’s involvement has been limited to witnessing/observing a third party’s intervention(s) at the third party’s
laboratory/test house or other facilities and installations used for the intervention(s). The Company’s sole responsibility was to be present at the time of the third
party’s intervention(s) to forward the results, or confirm the occurrence, of the intervention(s). The Company is not responsible for the condition or calibration of
apparatus, instruments and measuring devices used, the analysis methods applied, the qualifications, actions or omissions of the third party’s personnel or the analysis
results.”
© SGS Société Générale de Surveillance SA – 2021 – All rights reserved - SGS is a registered trademark
of SGS Société Générale de Surveillance SA
Page 7 of 7
Factory Test
SAUDI ARABIAN DUCTILE IRON PIPE CO. LTD. Document Ref QF 23
Standard : ISO2531/BSEN545/SASO1020/SASO1019
Standard : ISO2531/BSEN545/SASO1020/SASO1019
Standard : ISO2531/BSEN545/SASO1020/SASO1019
Standard : ISO2531/BSEN545/SASO1020/SASO1019
Standard : ISO2531/BSEN545/SASO1020/SASO1019
Standard : ISO2531/BSEN545/SASO1020/SASO1019
Standard : ISO2531/BSEN545/SASO1020/SASO1019
Standard : ISO2531/BSEN545/SASO1020/SASO1019
Standard : ISO2531/BSEN545/SASO1020/SASO1019
Standard : ISO2531/BSEN545/SASO1020/SASO1019
Standard : ISO2531/BSEN545/SASO1020/SASO1019
Standard : ISO2531/BSEN545/SASO1020/SASO1019
Standard : ISO2531/BSEN545/SASO1020/SASO1019
Standard : ISO2531/BSEN545/SASO1020/SASO1019