Professional Documents
Culture Documents
Product Manual IS 17397P 1
Product Manual IS 17397P 1
June 2022
www.bis.gov.in
उत्पाद मै नुअल
पी-जाइललन - विशिष्ट
IS 17370 : 2020 के अनस
ु ार
This Product Manual shall be used as reference material by all Regional/Branch Offices &
licensees to ensure coherence of practice and transparency in operation of certification under
Scheme-I of Bureau of Indian Standards (Conformity Assessment) Regulations, 2018 for various
products. The document may also be used by prospective applicants desirous of obtaining BIS
certification licence/certificate.
1. उत्पाद :
IS 17370 : 2020
Product
शीर्ष क : पी-जाइशिन - विशिष्ट
Title p-XYLENE - SPECIFICATION
:
संशोधनों की संख्य ा 0
No. of amendments NIL
2. नमूना लदशालनदे श
Sampling Guidelines
कच्चा माल
a) : No specific requirement
Raw material
b) समूहीकरण लदशालनदे श :
NA
Grouping Guidelines
c) नमूने का आकार :
500 ml
Sample Size
PM/ 17370/ 1
June 2022
Sampling guidelines for During operative period of one year, only one Factory sample
d) and one Market sample to be drawn for independent testing
surveillance
for all requirements.
3. परीक्षण उपकरणों की सूची : कृपया Annex-A दे खें
List of Test Equipment
Please refer Annex-A
लनरीक्षण और परीक्षण की स्कीम
4. : कृपया Annex-B दे खें
Scheme of Inspection
and Testing Please refer Annex-B
5. एक लदन में सं भालित परीक्षण
Possible tests in a day
All tests are possible in a day
6. लाइसेंस का दायरा /Scope of the Licence:
Licence is granted to use Standard Mark as per IS 17370 : 2020 with the following
Scope :
Name of the product p-XYLENE
ANNEX – A
LIST OF TEST EQUIPMENTS
TO THE PRODUCT MANUAL FOR
p-XYLENE - SPECIFICATION
ACCORDING TO IS 17370 : 2020
The list above is indicative only and may not be considered as exhaustive
PM/ 17370/ 1
June 2022
ANNEX B
SCHEME OF INSPECTION AND TESTING
TO THE PRODUCT MANUAL FOR
p-XYLENE - SPECIFICATION
ACCORDING TO IS 17370 : 2020
1. LABORATORY-A laboratory shall be maintained which shall be suitably equipped (as per the
requirement given in column 2 of Table 1) and staffed, where different tests given in the
specification shall be carried out in accordance with the methods given in the specification.
1.1 The manufacturer shall prepare and implement a calibration plan for the test equipment.
2. TEST RECORDS- The manufacturer shall maintain test records for the tests carried out to
establish conformity.
3. PACKING AND MARKING - The Standard Mark as given in the Schedule of the licence shall
be marked on each container provided always that the material so marked conforms to each
requirement of the specification.
3.1 Packing and Marking shall be done as per Cl. 5 of the Indian Standard. In addition, the
following details shall be marked on each container:
4. CONTROL UNIT – For the purpose of this scheme, a control-unit is defined as the entire
quantity of p-Xylene produced under similar condition of manufacturing in a day.
5.1 All the production which conforms to the Indian Standards and covered by the licence should
be marked with Standard Mark.
3 Requirements
Purity 3 ASTM D5917 or R One Each Control unit
i D7504
m-Xylene 3 ASTM D5917 or R One Each Control unit
ii D7504
o-Xylene 3 ASTM D5917 or R One Each Control unit
iii D7504
Sulphur 3 ASTM D7183 R One Each Control unit
iv
Toluene 3 ASTM D5917 or R One Each Control unit
v
D7504
Ethylbenzene 3 ASTM D5917 or R One Each Control unit
vi D7504
Note-1: Whether test equipment is required or sub-contracting is permitted in column 2 shall be decided by the Bureau and shall be
mandatory. Sub-contracting is permitted to a laboratory recognized by the Bureau or Government laboratories empanelled by the
Bureau.
Note–2: Levels of control given in column 3 are only recommendatory in nature. The manufacturer may define the control unit/batch/lot and
submit his own levels of control in column 3 with proper justification for approval by BO Head.