Professional Documents
Culture Documents
ETAP 21.0.2 RT Installation & MongoDB Configuration Rev2
ETAP 21.0.2 RT Installation & MongoDB Configuration Rev2
Purpose: This document walks through ETAP 21.0.2 RT installation and provides instructions for
ETAP RT configuration.
Server 2019
You need to check if .NET Framework 3.5 Feature is enabled. If not, then check .NET Framework
3.5 and install it.
ETAP SOFTWARE INSTALLATION
The ETAP RT installer is available in .ISO & .ZIP formats; installation process is similar for both.
1. Installer file: ETAPRT2102RTEN.zip; decompress it before step 2.
2. Launch the ETAP 21.0.2 RT Installation Manager executing EtapInstaller.exe.
3. Select Installation option: “Software”.
Note: the images and steps below belong to the “Software” option. If License Manager installation is
required, then it can be installed separately.
ETAPRT2102EN folder; executable. ETAP 21.0.2 RT Installation Manager
4. Check on “I agree to the license terms and conditions, then click on “Install” button.
5. Click on Next at System Requirements for ETAP 21.0.2 RT window.
6. Click on Next at MongoDB Setup information window; leave the default settings at this window.
7. Click on “Install” button at Choose Destination Location or change its path to desired location.
8. Installation takes a few minutes to complete.
9. Once installation is completed a shortcut is created at the desktop.
LICENSING & RUNNING ETAP
1) Launch and Test ETAP:
After Installation, Click on Windows “START” menu > “ETAP 21.0.2 Real Time” Folder > And click on “ETAP
21.0.2 Real Time”. Or from the shortcut on the Desktop.
2) ETAP will start. At the License Path Selection, choose the 2nd row and enter the License Server IP address or
computer name. Then OK. Note: Internet Connection is required.
3) Once ETAP is connected to the License Server, the following screen will prompt for Activation Code.
Note: When ETConfig is launched for the first time, it opens at MongoDB tab, the Manage Connection
Strings button may be disabled.
c. After executing step 12.b, all ETConfig tabs should get enabled. However, “Manage
Connection Strings” button may still be disabled.
d. Close ETConfig and reopen it; “Manage Connection Strings” button should be enabled now.