CH570 and CH670 Sugarcane Harvester Replacement Parts Guide

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

REPLACEMENT PARTS GUIDE

CH570,CH670 Sugarcane Harvesters

CAB ENGINE
AIR CONDITIONING FUEL FILTER
FRESH AIR FILTER RE525523
1
RE284091 5 Change as require or when Diagnostic
1
Remove and Install as Required. Trouble Code (DTC) is generated.

AIR CONDITIONING
BREATHER
RECIRCULATING FILTER 2 2 1
H216169
L214634 5
3
6 6
Clean every 500 hours & replace
Remove and Install as Required. as required.
ENGINE 8
7

PRIMARY AIR FILTER


OIL FILTER HXE11090
DZ101884 4

3 Replace every 500 hours.


Change Engine oil and replace 7

filter in first 100 hours and Every AIR SAFETY FILTER


500 hours. HXE11091
Replace Every 1500 hours.
FUEL PRE-FILTER
AT365869 RESERVOIR
4
Check and Clean Every 250 CB01505351
hours. 8
Change Hydraulic oil in Every 3000
hours and Filter in every 1500 hours.

CLICK PART NUMBER TO BUY


Mar 2022. Release Date. For Company Use - NW528851
CAPACITIES
CH570,CH670 Sugarcane Harvesters

CAPACITIES (Approximate):
Fuel Tank:
......................................................................605 L (160 gal) Final Drive:
John Deere Synthetic 80W/140 API GL5 EP
Engine Oil: ...........................................................................3 L (0.8 gal)
John Deere Plus-50™ II
Pump Drive Gear Case :
......................................................................33.3 L (8.8 gal) John Deere 85W-140 API GL-5
......................................................................7.1 L (1.87 gal)
Hydraulic Reservoir:
John Deere Torq-Gard™ Basecutter Gear Case:
......................................................................405 L (107 gal) John Deere 85W-140 API GL-5
CH570..............................................................7 L (1.85 gal)
Radiator (Coolant): CH670...........................................................13.5 L (3.5 gal)
Cool-Gard™ II
....................................................................69.6 L (16.5 gal) Chopper Gear Case:
John Deere 85W-140 API GL-5
.........................................................................13 L (3.4 gal)

Return to Filter Overview

*Parts located in front with respect to model image.

Mar 2022. Release Date. *See operator’s manual for addional details.
REPLACEMENT PARTS GUIDE
CH570,CH670 Sugarcane Harvesters
PRIMARY & SECONDARY EXTRACTOR TOPPER & CROP DIVIDER
PRIMARY HOOD LINERS SIDE KNIFE BLADE
LH CXT25750 22 CXT33665
1
RH CXT25751 Cuts Tangled Cane.
REAR CXT25794 OUTER SCROLL BEARING
Protects the External Hood From Wear. 21 0121378786
Allows Outer Scroll to Rotate Easily.
PRIMARY EXTRACTOR HUB
CXT18530
2
INNER SCROLL BEARING BEARING WITH
Supports the PE Fan Blades. 20
HOUSING CB01480304
BEARING CB01437484
PRIMARY EXTRACTOR BLADES Allows Inner Scroll to Rotate Easily.
AXT16378
3
CROP DIVIDER TOE PLATE
Extracts the Leaf From Billets. 19 CXT26420
Lifts Cane onto Scroll.
SECONDARY EXTRACTOR BLADES
4 4 TOPPER BLADE
1190286278
CXT33665
Extracts the Leaf From Billets. 5 18
BOLT 03M7608,NUT 14M7722
SE WEAR RING Cuts the Cane Tops.
5
1190286278 6
Protects the SE Housing from Wear.
3
BIN FLAP RUBBER
2

0191372460
6 1
BASE CUTTER & CHOPPER
7
Directs Cane Into the Wagon. 8
BASE CUTTER DISK
9 CH570 24” AXT16364
PRIMARY EXTRACTOR VANE 10
12
CH570 22” AXT16365
CB01422414
7
11 18 17
CH570 SCALLOPED AXT16366
Controls Chamber Air Flow. 22
CH670 32” LH AXT16367
PRIMARY EXTRACTOR WEAR RING 13
14 CH670 32” RH AXT16368
PREMIUM PLATE 0291363721 Supports Base Cutter Blades.
STANDARD CB01432582
16
8
15
17 21 20
BASE CUTTER BLADE
19
Protects the PE Housing From Wear. 4mm, 4 EDGE CXT25406
5mm, 2 EDGE CXT25405
DEFLECTOR LOUVER 16
5mm, 4 EDGE CXT25404
CXT17652 9
6mm, 2 EDGE CXT25403
Deflects Cane into Elevator Basket. 6mm, 4 EDGE CXT25402
Cuts Cane Stalks at Base.
BASE CUTTER LEG KICKER
BASE CUTTER & CHOPPER CH570 CXT23194
15 CH670 CXT18360
CHOPPER BLADE Facilitates Feeding Into Butt Lifter.
CXT23276
10
BOLT 19H3188, WASHER T83426 FEED ROLLER BEARING WITH HOUSING
Chops Whole Stalk Cane into Billets.
14
CB11469977, BEARING CB01437484
Supports the Feed Rollers.
CHOPPER BLADE CLAMP PLATE FEED ROLLER HUB AND ADAPTER
STANDARD CXT13010 10 ADAPTER AXT11319
13
EXTREME OVERLAP CXT12137 HUB CXT13073
Attaches Chopper Blade to Drum. Drives Feed Rollers.

FLYWHEEL DISK, LINING, BUSHING CHOPPER SWIPE PLATE


DISK 0621305006 11
12 CXT19774
LINING CXT17072 Cleans the Top Chopper Blade Of Any Billet Frag-
ments and Prevents Carry Over From Top Drum.
BUSHING 0621305008
Protects the Gear Box.
*Parts located in Front.
CLICK PART NUMBER TO BUY
Mar 2022. Release Date. *Parts located Behind.
REPLACEMENT PARTS GUIDE
CH570,CH670 Sugarcane Harvesters ELEVATOR
STANDARD ELEVATOR FLOORS
ELEVATOR CB11433962 Top Floor Section RH, 34in
STANDARD ELEVATOR SPROCKETS CB11423838 Top Floor Section LH, 34in
CXT18155 Drive 17 Tooth CB11473168 Top Floor Section LH, 24in
1
CB11421303 Idler 17 Tooth CB11473169 Top Floor Section RH, 24in
CB11414708 Idler 11 Tooth CB11472908 Top Floor Section RH, 12in
1
F40206SS Idler Bearing CB11472906 Top Floor Section LH, 12in
Guides Elevator Chain. CB11472890 Top Floor Section LH, Standard
9
XWEAR™ ELEVATOR SPROCKETS 1
CB11472888 Top Floor Section RH, Standard
CXT28884 Drive 17 Tooth 1
3
9 CB11472870 Middle Floor Long Section, LH
CXT28880 Idler 17 Tooth CB11472871 Middle Floor Short Section, RH
CXT28864 Idler 11 Tooth CB11472869 Bottom Floor Curve
AKK15137 Idler Bearing
XWEAR™ ELEVATOR FLOORS
Guides Elevator Chain.
AXT18250 Top Floor Section RH, 34in
2 AXT18249 Top Floor Section LH, 34in
ELEVATOR CHAIN
2 AXT18155 Top Floor Section RH, 24in
CB01433201 Chain - Std
AXT18968 Top Floor Section LH, 24in
CB01445090 Chain w/ 12 in ext.
AXT18248 Top Floor Section RH, 12in
CB01445095 Chain w/ 24 in ext.
AXT18247 Top Floor Section LH, 12in
CB01434471 Chain w/ 34 in ext.
Drives the slats that carry the billets.
1
AXT18245 Top Floor Section LH, Standard
11 AXT18244 Top Floor Section RH, Standard
AXT17867 Top Floor Curve RH/LH
ELEVATOR SLAT 10
AXT17866 Middle Floor Long Section, RH/LH
CB11464244 3
AXT17865 Middle Floor Short Section, RH/LH
Carries cane billets to infield transport.
AXT17594 Bottom Floor Curve, RH/LH
AXT17863 Bottom Floor Section, RH
AXT17864 Bottom Floor Section, LH
TRACK Supports cane billets that are being carried to
infield transport.
CARRIER ROLLER
CXT27948 4 STANDARD CHAIN WEAR STRIPS
Guides and Carries Tracks. CB01423968 Top Section, 34in
CB01454809 Top Section, 34in
TRACK CHAIN CB01439640 Top Section, 24in
AXT10767 Track Chain w/o Shoes CB01439641 Top Section, 24in
AXT16508 Track Chain Sealed and Lub. w/o 10
CB01445087 Top Section, 12in
Shoes 11
CB01445088 Top Section, 12in
AXT10745 Track Chain w/o Shoes 5 CB01423961 Top Section
AXT10744 Track Chain w/o Shoes CB01423920 Middle Section
AXT10792 Track Chain w/o Shoes CB01423925 Bottom Section
AXT10791 Track Chain w/o Shoes CB01479032 Bottom Section
Supports and Propels the Machine. CXT16270 Bottom Section
CB01430578 Bottom Section Curve
TRACK IDLER XWEAR™ CHAIN WEAR STRIPS
AXT17632 6
CXT29913 Top Section, 34in
Guides and Tensions Chain.
6
4 CXT29914 Top Section, 34in
BOTTOM ROLLER
5 7 8 12 CXT23317 Top Section, 24in
CXT25180 Bearing Position 1, 2, 7, 8 CXT23318 Top Section, 24in
CXT29356 Bushing Position 3, 4, 5, 6
7
CXT29911 Top Section, 12in
Guide and Carry Tracks. 12
CXT29912 Top Section, 12in
CXT29909 Top Section
CXT29910 Top Section
TRACK SPROCKET CXT29907 Middle Section
CXT30406 8
CXT23314 Bottom Section
Drives the Track Chain. CXT23315 Bottom Section
CXT23316 Bottom Section
*Parts located in Front. CXT29908 Bottom Section
CLICKCurve
PART NUMBER TO BUY
Mar 2022. Release Date. *Parts located Behind. Supports elevator chain.

You might also like