Professional Documents
Culture Documents
MTC - Pipe Erw
MTC - Pipe Erw
SPECIFICATION &GF!ADE: EN 10219-1:2006 & EN 10219-2:2019, S355J,H,(ERW COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS) Date: 04.07.2020
AOS
S.C. No. TTP- 19-20-SO-1060003 • W'V
E
O02-D99
cu WIDTH(mm) TEMP C42 C43
ITEM TYpe of yield"' TENSILE C40
OTHER TEST
EL0N6 (°C) C31 C32
No. Pipe End PRODUCT
coi
STRESS STRENGTH COI
ao
NUMBER OF CAST / HEAT No C02 A VALUES AVE.
Rm= C02
PIECES DIMENSIONS(mm) CIO Ro= 5.65
TEST TYPE
U) (J)
(N/mm') (N/mm') (%)
PL
WELD SEAM 100% EDDY CURRENT TESTED TO EN
27 BL KV 7.5 -20 64,66,68 66
10246-3,
CHST 323.90 X 10.00 X 12.00 20401275 BLS 449 543
BPE 12
Acceptance Level E4.
Visual And Dimension Acceptance Criteria EN10219
2Tabel 2 & 3
CEV
Cu Nb Sn
Cr Mo Ni Al
C7i<si ANALYSIS % Mn
M
0.002 0.017 0.048 0.012
0.170 0.016 1.277 0.017 0.006 0.017
20401275
Legend :
1) L=Ladle analysis. P= Product analysis.
SA
2) CE=C+Mn/6+(Cr+Mo+V)/5+{Ni+Cu)/15
3) L=Longitudinal,T=Transeverse,B= Body, KV=Charpv V, HAZ=Heat Affected Zone,S=5trip section,F=Full section,
4) YS = Yield Strength(0.5% proof strength), TS = Tensile Strength, El = Elongation
5) BPE= Black Plain End Square Cut. BPEB= Black Plain End Beveled
6) SHST/RHST/CHST=Square/Rectangular/Circular Hollow Sections Tube Dubai
04-8648221
7) Intended Use: Cold formed steel hollow sections for building and civil engineering.
We hereby certify that the material ERW Hollow section tube has been manufactured and inspected according to European Standard
EN 10219-1&2 and found satisfactory.