Download as pdf or txt
Download as pdf or txt
You are on page 1of 24

University of Guyana

School of Pharmacy

PHM 1107- Pharmaceutical Organic Chemistry

Aromatic, Benzenoid and Heterocyclic Chemistry

Many derivatives of benzene were originally isolated from the fragrant balsams obtained from
trees and plants, and these compounds were therefore described as being aromatic in reference to
their pleasant odors. Over time, chemists discovered that many derivatives of benzene are, in
fact, odorless. Nevertheless, the term ―aromatic‖ is still used to describe all derivatives of
benzene, regardless of whether they are fragrant or odorless. All of the following top-selling
drugs contain the benzene-like aromatic ring (highlighted in red).

Prepared by: Mr. Kevin Corridus Page 1


Structure of Benzene

The molecular formula of this compound is C6H6: a hydrocarbon comprised of six carbon atoms
and six hydrogen atoms. In 1866, August Kekulé used his recently published structural theory of
matter to propose a structure for benzene. Specifically, he proposed a ring comprised of
alternating double and single bonds.

Kekulé described the exchange of double and single bonds to be an equilibrium process. Over
time, this view was refined by the advent of resonance theory and molecular orbital concepts of
delocalization. The two drawings above are now viewed as resonance structures, not as an
equilibrium process

To avoid drawing resonance structures, benzene is often drawn like this:

Prepared by: Mr. Kevin Corridus Page 2


Nevertheless, these drawings should be avoided when proposing reaction mechanisms, which
require scrupulous bookkeeping of electrons.

Aromatic compounds are those that meet the following criteria:

1. The structure must be cyclic, containing some number of conjugated pi bonds.

2. Each atom in the ring must have an unhybridized p orbital. (The ring atoms are usually sp2
hybridized or occasionally sp hybridized.)

3. The unhybridized p orbitals must overlap to form a continuous ring of parallel orbitals. In
most cases, the structure must be planar (or nearly planar) for effective overlap to occur.

4. Delocalization of the pi electrons over the ring must lower the electronic energy.

The tendency of benzene to react by substitution rather than addition gave rise to another concept
of aromaticity. For a compound to be called aromatic meant, experimentally, that it gave
substitution reactions rather than addition reactions even though it was highly unsaturated.

Benzenoid Aromatic Compounds

In addition to those that we have seen so far, there are many other examples of aromatic
compounds. Benzene is not the only compound that exhibits aromatic stabilization.
Representatives of one broad class of benzenoid aromatic compounds, called polycyclic
aromatic hydrocarbons (PAH) are shown below:

Prepared by: Mr. Kevin Corridus Page 3


Benzenoid polycyclic aromatic hydrocarbons consist of molecules having two or more benzene
rings fused together. A close look at one example, naphthalene, will illustrate what we mean by
this. According to resonance theory, a molecule of naphthalene can be considered to be a hybrid
of three Kekulé structures. One of these Kekulé structures, the most important one, is shown
below. There are two carbon atoms in naphthalene (C4a and C8a) that are common to both rings.
These two atoms are said to be at the points of ring fusion. They direct all of their bonds toward
other carbon atoms and do not bear hydrogen atoms.

One kekule structure for naphthalene

NB

Compounds that do not contain a ring that comprised of continuously overlapping p orbitals are
called nonaromatic compounds.

Heterocyclic Aromatic Compounds

Almost all of the cyclic molecules that we have discussed so far have had rings composed solely
of carbon atoms. However, in many cyclic compounds an element other than carbon is present in
the ring. • Cyclic compounds that include an element other than carbon are called heterocyclic
compounds.

Heterocyclic compounds containing nitrogen, oxygen, or sulfur are by far the most common.
Four important examples are given here in their Kekulé forms. These four compounds are all
aromatic:

Prepared by: Mr. Kevin Corridus Page 4


Electrophilic Aromatic Substitution

Some of the most important reactions of aromatic compounds are those in which an electrophile
replaces one of the hydrogen atoms of the ring. These reactions, called electrophilic aromatic
substitutions (EAS), allow the direct introduction of groups onto aromatic rings such as
benzene, and they provide synthetic routes to many important compounds.

In this unit, we will see many other groups that can also be installed on an aromatic ring via an
electrophilic aromatic substitution reaction.

A noteworthy example of electrophilic aromatic substitution in nature is the biosynthesis of the


thyroid hormone thyroxine, where iodine is incorporated into benzene rings that are derived from
tyrosine.

Prepared by: Mr. Kevin Corridus Page 5


Like an alkene, benzene has clouds of pi electrons above and below its sigma bond framework.
Although benzene’s pi electrons are in a stable aromatic system, they are available to attack a
strong electrophile to give a carbocation. This resonance-stabilized carbocation is called a sigma
complex because the electrophile is joined to the benzene ring by a new sigma bond.

The sigma complex (also called an arenium ion) is not aromatic because the sp3 carbon atom
interrupts the ring of p orbitals. The sigma complex regains aromaticity either by a reversal of
the first step (returning to the reactants) or by loss of the proton on the tetrahedral carbon atom,
leading to the aromatic substitution product.

General Reaction Mechanism

Prepared by: Mr. Kevin Corridus Page 6


Halogenation

Benzene reacts with bromine and chlorine in the presence of Lewis acids to give halogenated
substitution products in good yield. The Lewis acids typically used are aluminum chloride
(AlCl3) and iron chloride (FeCl3) for chlorination, and iron bromide (FeBr3) for bromination. The
purpose of the Lewis acid is to make the halogen a stronger electrophile.

Bromination Mechanism

Sulfonation

Benzene reacts with fuming sulfuric acid at room temperature to produce benzene-sulfonic acid.
Fuming sulfuric acid is sulfuric acid that contains added sulfur trioxide (SO3). Sulfonation also
takes place in concentrated sulfuric acid alone, but more slowly. Under either condition, the
electrophile appears to be sulfur trioxide.

Prepared by: Mr. Kevin Corridus Page 7


Aromatic sulfonation is a key step in the synthesis of such compounds as the sulfa drug family of
antibiotics.

Sulfur trioxide (SO3) is a very powerful electrophile

Sulfonation Reaction Mechanism

Prepared by: Mr. Kevin Corridus Page 8


Nitration

When benzene is treated with a mixture of nitric acid and sulfuric acid, a nitration reaction
occurs in which nitrobenzene is formed.

Concentrated sulfuric acid increases the rate of the reaction by increasing the concentration of
the electrophile, the nitronium ion (NO2+). The nitronium ion is formed from HNO3 by
+
protonation and loss of water and which reacts with benzene in much the same way Br does.
Attachment of an amino group to an aromatic ring by the two-step nitration/reduction sequence
is a key part of the industrial synthesis of many dyes and pharmaceutical agents

Nitration Reaction Mechanism

Prepared by: Mr. Kevin Corridus Page 9


Friedel- Crafts Reactions

Friedel–Crafts reactions provide a method for the preparation of alkylbenzenes (ArR)


and acylbenzenes (ArCOR). These reactions are called Friedel–Crafts alkylation and Friedel–
Crafts acylation.

Friedel- Crafts alkylation

 The mechanism for the reaction starts with the formation of a carbocation.
 The carbocation then acts as an electrophile and is attacked by the benzene ring to form
an arenium ion.
 The arenium ion then loses a proton.

The following is a general equation for a Friedel–Crafts alkylation reaction:

Reaction Mechanism

Prepared by: Mr. Kevin Corridus Page 10


Friedcrafts- Acylation

A reaction that installs an acyl group is called an acylation. Two common acyl groups are the
acetyl group and the benzoyl group. (The benzoyl group should not be confused with the benzyl
group, −CH2C6H5

The Friedel–Crafts acylation reaction is often carried out by treating the aromatic compound
with an acyl halide (often an acyl chloride). Unless the aromatic compound is one that is highly
reactive, the reaction requires the addition of at least one equivalent of a Lewis acid (such as
AlCl3) as well. The product of the reaction is an aryl ketone:

Mechanism

Prepared by: Mr. Kevin Corridus Page 11


Friedel–Crafts acylations can also be carried out using carboxylic acid anhydrides. For example:

Substitution Effect in Electrophilic Aromatic Substitution

Only one product can form when an electrophilic substitution occurs on benzene, but what would
happen if we were to carry out an electrophilic substitution on a ring that already has a
substituent? A substituent already present on the ring has two effects:

 Substituents affect the reactivity of an aromatic ring- Some substituents activate a


ring, making it more reactive than benzene, and some deactivate a ring, making it less
reactive than benzene.
 Substituents affect the orientation of a reaction- The three possible disubstituted
products—ortho, meta, and para—are usually not formed in equal amounts. Instead, the
nature of the substituent already present on the ring determines the position of the second
substitution. An OH group directs further substitution toward the ortho and para
positions, for instance, while a CN directs further substitution primarily toward the meta
position.

Prepared by: Mr. Kevin Corridus Page 12


NB

Substituents can be classified into three groups, as shown below: meta-directing deactivators,
ortho- and para-directing deactivators, and ortho and para-directing activators. There are
no meta-directing activators. Note how the directing effect of a group correlates with its
reactivity. All meta directing groups are deactivating, and all ortho- and para-directing groups
other than halogen are activating. The halogens are unique in being ortho and para-directing but
deactivating.

An Explanation of Substituent Effect

Activating and deactivating effects in aromatic rings

What makes a group either activating or deactivating? The common characteristic of all
activating groups is that they donate electrons to the ring, thereby making the ring more electron-
rich, stabilizing the carbocation intermediate, and lowering the activation energy for its
formation. Conversely, the common characteristic of all deactivating groups is that they
withdraw electrons from the ring, thereby making the ring more electron-poor, destabilizing the
carbocation intermediate, and raising the activation energy for its formation.

Orienting Effects in Aromatic Rings: Ortho and Para Directors

Let’s look at the nitration of phenol as an example of how ortho- and para directing substituents
work. In the first step, reaction with the electrophilic nitronium ion (NO2) can occur either ortho,
meta, or para to the OH group, giving the carbocation intermediates.

Prepared by: Mr. Kevin Corridus Page 13


The ortho and para intermediates are more stable than the meta intermediate because they have
more resonance forms—four rather than three—including a particularly favorable one that
allows the positive charge to be stabilized by electron dona tion from the substituent oxygen
atom. Because the ortho and para intermediates are more stable than the meta intermediate, they
are formed faster.

In general, any substituent that has a lone pair of electrons on the atom directly bonded to the
aromatic ring allows an electron-donating resonance interaction to occur and thus acts as an
ortho and para director.

Prepared by: Mr. Kevin Corridus Page 14


Orienting Effects in Aromatic Rings: Meta Directors

The influence of meta-directing substituents can be explained using the same kinds of arguments
used for ortho and para directors. Look at the chlorination of benzaldehyde, for instance. Of the
three possible carbocation intermediates, the meta intermediate has three favorable resonance
forms, while the ortho and para intermediates have only two. In both ortho and para
intermediates, the third resonance form is particularly unfavorable because it places the positive
charge directly on the carbon that bears the aldehyde group, where it is disfavored by a repulsive
interaction with the positively polarized carbon atom of the C=O group. Hence, the meta
intermediate is more favored and is formed faster than the ortho and para intermediates.

In general, any substituent that has a positively polarized atom directly attached to the ring
makes one of the resonance forms of the ortho and para intermediates unfavorable, and thus acts
as a meta director.

Prepared by: Mr. Kevin Corridus Page 15


Determining the Directing Effects of other Substituents

Both activators and deactivators can be classified as strong, moderate, and weak.

Activators

Strong activators are characterized by the presence of a lone pair immediately adjacent to the
aromatic ring.

All of these groups exhibit a lone pair that is delocalized into the ring, as can be seen in their
resonance structures. For example, phenol has the following resonance structures:

Many of these resonance structures have a negative charge in the ring, indicating that the OH
group is donating electron density into the ring. This electron-donating effect strongly activates
the ring.

Moderate activators exhibit a lone pair that is already delocalized outside of the ring.

Prepared by: Mr. Kevin Corridus Page 16


In the first three compounds, there is a lone pair next to the ring, but that lone pair is
participating in resonance outside of the ring.

This effect diminishes the capability of the lone pair to donate electron density into the ring.
These groups are activating, but they are moderate activators. The lone pair of an alkoxy group
(OR) is not participating in resonance outside of the ring, and we might therefore expect that it
would be a strong activator. Nevertheless, alkoxy groups belong to the class of moderate
activators. Alkoxy groups are generally more activating than other moderate activators but less
activating than strong activators (such as amino groups).

Alkyl groups are weak activators, because they donate electron density by the relatively weak
effect of hyperconjugation.

Deactivator

As we have already seen, many of the halogens (Cl, Br, or I) are observed to deactivate a
benzene ring:

We have seen that the electronic effects of halogens are determined by the delicate competition
between resonance and induction, with induction emerging as the dominant effect. As a result,
halogens are weak deactivators.

Prepared by: Mr. Kevin Corridus Page 17


Moderate deactivators are groups that exhibit a π bond to an electronegative atom, where the π
bond is conjugated with the aromatic ring. Below are several examples.

Each of these groups withdraws electron density from the ring via resonance. For example:

Three of the resonance structures have a positive charge in the ring, indicating that the group is
withdrawing electron density from the ring. This electron-withdrawing effect moderately
deactivates the ring.

There are a few common substituents that are strong deactivators.

The nitro group is a strong deactivator because of resonance and induction. The other two groups
are strong deactivators because of powerful inductive effects. A positively charged nitrogen atom
is extremely electronegative, and CX3 has three electron-withdrawing halogens. Do not confuse a
CX3 group with a halogen (X).

Prepared by: Mr. Kevin Corridus Page 18


Nucleophilic Aromatic Substitution

In this section, we consider reactions in which the ring is attacked by a nucleophile. Such
reactions are called nucleophilic aromatic substitution reactions. In the following example, an
aromatic compound is treated with a strong nucleophile (hydroxide), which displaces a leaving
group (bromide):

In order for a reaction like this to occur, three criteria must be satisfied:

1. The ring must contain a powerful electron-withdrawing group (typically a nitro group).

2. The ring must contain a leaving group (usually a halide).

3. The leaving group must be either ortho or para to the electron-withdrawing group. If the leaving group
is meta to the nitro group, the reaction is not observed.

Any mechanism that we propose for nucleophilic aromatic substitution must successfully explain
the three criteria.

Prepared by: Mr. Kevin Corridus Page 19


Much like the reactions we have seen thus far, this mechanism also involves two steps, but take
special notice of the resonance-stabilized intermediate, called a Meisenheimer complex. This
intermediate exhibits a negative charge that is resonance stabilized throughout the ring. This
intermediate is very different from a sigma complex, which exhibits a positive charge that is
resonance stabilized throughout the ring. The difference between these intermediates should
make sense in that electrophilic aromatic substitution involves the ring attacking E+, so the
resulting intermediate will be positively charged; nucleophilic aromatic substitution involves the
ring being attacked by a negatively charged nucleophile, so the resulting intermediate will be
negatively charged.

Summary of the three different mechanisms for aromatic substitution reactions

Prepared by: Mr. Kevin Corridus Page 20


All three mechanisms accomplish aromatic substitution, but there are a few key differences that
warrant our attention:

1. The intermediate: Electrophilic aromatic substitution proceeds via a sigma complex,


nucleophilic aromatic substitution proceeds via a Meisenheimer complex, and elimination-
addition proceeds via a benzyne intermediate.

2. The leaving group: In electrophilic aromatic substitution, the incoming substituent replaces a
proton. In the other two mechanisms, a negatively charged leaving group (such as a halide ion) is
expelled.

3. Substituent effects: In electrophilic aromatic substitution, electron-withdrawing groups


deactivate the ring toward attack, while in nucleophilic aromatic substitution, an electron-
withdrawing group is required in order for the reaction to proceed.

Pharmaceutical Application

Aromatic halogenation is a common technique used in drug design, as chemists attempt to


modify the structure of a known drug to produce new drugs with enhanced properties. For
example, consider the following three compounds:

Prepared by: Mr. Kevin Corridus Page 21


Pheniramine is an antihistamine. When a chlorine atom is installed in the para position of one of
the rings, a new compound called chlorpheniramine is obtained. Chlorpheniramine is 10 times
more potent than pheniramine and is marketed under the trade name Chlortrimeton. When a
bromine atom is installed instead of chlorine, brompheniramine is obtained, which is marketed
under the trade name Dimetane. This compound is one of the active ingredients in Dimetapp. It
is similar in potency to Chlortrimeton, but its effects last almost twice as long.

Halogenation is a critical process in the design of many other types of drugs as well. For
example, consider the antifungal agents chlotrimazole and econazole:

Both of these compounds are examples of azole antifungal agents (azoles are a broad class of
five-membered rings that contain a nitrogen atom and at least one other heteroatom, such as
nitrogen, oxygen, or sulfur). Azole antifungal agents typically contain two or three additional
aromatic rings, at least one of which is substituted with a halogen. Structure-activity studies have
revealed that the presence of a halogen is critical for drug activity. Chlotrimazole is marketed
under the trade name Lotrimin, and econazole is marketed under the trade name Spectazole.
Notice that in both of these compounds the halogens are positioned in the ortho and para
positions.

Prepared by: Mr. Kevin Corridus Page 22


The Discovery of Prodrugs

Among many other applications, azo dyes are currently used in paints, cosmetics, and food. One
such application led to a discovery that had a profound impact on the field of medicine.
Specifically, it was observed that certain bacteria absorbed azo dyes, making them more readily
visible under a microscope. In an effort to find an azo dye that might be toxic to bacteria, Fritz
Mietzsch and Joseph Klarer (at the German dye company, I.G. Farbenindustrie) began
cataloguing azo dyes for possible antibacterial properties. A physician named Gerhard Domagk
evaluated the dyes for potential activity, which led to the discovery of the potent antibacterial
properties of prontosil.

Domagk was able to demonstrate that prontosil cured streptococcal infections in mice. In 1933,
physicians began using prontosil in human patients suffering from life-threatening bacterial
infections. The success of this drug was extraordinary, and prontosil staked its claim as the first
drug that was systematically used for the treatment of bacterial infections.

Prontosil exhibited one very curious property that intrigued scientists. Specifically, it was found
to be totally inactive against bacteria in vitro (literally ―in glass,‖ in bacterial cultures grown in
glass dishes). Its antibacterial properties were only observed in vivo (literally ―in life,‖ when
administered to living creatures, such as mice and humans). These observations inspired much
research on the activity of prontosil, and in 1935, it was found that prontosil is metabolized in the
body to produce a compound called sulfanilamide.

Prepared by: Mr. Kevin Corridus Page 23


Sulfanilamide was determined to be the active drug, as it interferes with bacterial cell growth. In
a glass dish, prontosil is not converted into sulfanilamide, explaining why the antibacterial
properties were only observed in vivo. This discovery ushered in the era of prodrugs. Prodrugs
are pharmacologically inactive compounds that are converted by the body (usually the liver) into
active compounds. This discovery led scientists to direct their research in new directions. They
began designing new potential drugs based on structural modifications to sulfanilamide rather
than prontosil. Extensive research was directed at making sulfanilamide analogues, called
sulfonamides.

Some sulfonamides are still used today to treat specific bacterial infection in patients with AIDS,
as well as a few other applications. Despite their small role in current practice, sulfonamides
occupy a unique role in history, because their development was based on the discovery of the
first known prodrug.

Reference:

1. Klein, D. R. (2016). Organic Chemistry (4th ed.). John Wiley & Sons, Inc.

2. Wade, L. G. (2013). Organic Chemistry. Pearson

3. McMurry, J. E. (2010). Fundamentals of Organic Chemistry. Cengage Learning.

4. Solomons, G., Fryhle, C. B., & Snyder, S. A. (2016). Organic Chemistry. John Wiley & Sons

Prepared by: Mr. Kevin Corridus Page 24

You might also like