Asbestos - Free
Fl Good Mechanical Strength
High Resistant To Heat Transfer
Stable At High Operating Temperature
8 Non-Corrosive ae. :Insalation.
Asbestos Free
I Noasbestos fiberisused inthe manufacture of ECO-LITE Calcium Silicate. Itmeets with
safety and health standards. fo .
Good Mechanical Strength
2 Available in densities of 170 ke/nt, 200 kg/mand 220 kg/m’.
All of which exhibit high flexural and compressive strengths.
High Resistant To Heat Transfer
3 ‘Thermal conductivity of ECO-LITE is in the range of 0.060 to 0,065 Wim at the mean
temperature of 70°C+5°C for the 3 densities of material.
Stable At High Operating Temperature
4 Will remain stable at sustained service temperature of upto 650°C.
: Non-Corresive
5 ‘Low in firee chloride and does not cause corrosion to steel surfaces,
ECO-LITE is an ashestos-free calcium silicate insulation material predveed
strict quality control in accorance with Japaness standard.
oa Siete nl
[iatPhysical Properties of 'Eco-Lite' Calcium Silicate
Properties
Density (kg/m?) 170 200 -220 .
‘Thermal conductivity
(Mean temperature 70°C+5°C) 0.050, Max 0.062, Max 0.065, Max.
(wim.k)
Flexural Strength, min, (kgflent) 3.60 310 3.10
Compressive strength, (kgticm’) 4.10 5.10 S10
Linear shrinks
sex m0 mm ew) 2.00 Max, 2.00 Max 2.00 Max
Service eget oO 650 650
Asbestos Content)
‘Compliance with:Description
*Quik-Cote” is a mineral fiber hydraulio-setting ther-
mal insulating and finishing cement. Itis a dry mixture of
mineral fier pellets and other-insulating fillers blended
with hydraulic setting binders and corrosion inhibitors,
When water is added, a highly plastic cement is formed
< with excellent trowelling and palming characierssties.
‘The wet cement takes a hydraulic set in about 2 hours
and, upon drying, provides a smooth, off-white, mono-
lithic finish on the applied surface.
Uses
“Quik-Cote”is used to form a hard, monolithic finish
over fibrous insulation products. Also, to seal joints and
point cracks on compound type (calcium silicate) insula-
tion materials. It is commonly used to insulate valves,
fitings and other complex shapes.
Application
“Quik-Cole” insulates and finishes in a single opera-
tion. It is applied by trowelling or palming to a single
desired thickness and should not be applied in more than
one coat. A metal fabricis recommended when trowelling
over fibrous materials. When. applied indoors *Quik-
Cote" requires no further treatment and may be painted
ifdesired. However, for outdoor applications, itis manda-
tory that a permanent protective coating be applied 24 to
48 hours after the cementis set.
Properties
Service Temperature ..
Coverage
Adhesion
Shrinkage
Green Set
Fire Resistane
Corrosion (Steel)
Shelf Life
Packaging ..
to 1200° F
approx. 30 BF/100 bs
“QUIK-COTE”
INSULATING
& FINISHING CEMENT
ASBESTOS FREE
Properties (continued)
“Thermal Conductivity
- 200° F Mean Temperature...
400° F Mean Temperature
600° F Mean Temperature
Applicable Specifications
FEDERAL SS-C-160
ASTM C-449
ASTM C-795"
NRC-AG 1.36°
MIL-124244*
*Special order requiring lot testing and chemical
analysis for product cerification.
‘This informations acura and reabe tothe best of cur Knowledge and
wil vay with manufacting and tasting tolerances. We have no conta
over insation workmanship, accassory mataals application cont
Sore and make no rpeesonaton er oxpossoderipiod waraniy,sihor
2510 machantably or finass, bayond te descrpon borin.
— MANUFACTURED BY —
PO BOX 281
JOPLIN, MO 64802 *
RK. INSULATION MFG. CO., INC.
417-781-6380 (MO)
800-641-4296
: 417-781-8335 (FAX)
— SINCE 1974 — 10C80