Professional Documents
Culture Documents
Tiva Washers Laboratory Washers 2023
Tiva Washers Laboratory Washers 2023
TIVA LAB
High-End Glassware Washer for Laboratories
Bringing over 95 years of
Professionalism
into your laboratory
Laboratory
Lab
Made with Over 95 Years of Experience
Tuttnauer's sterilization and infection control solutions sterilization solution to the healthcare and life science
are trusted by laboratories, hospitals, and clinics in industries. We are proud to have installed over
more than 140 countries. For over 95 years Tuttnauer 350,000 sterilization and infection control products
has been passionate about delivering a complete around the world.
Welcome to the
TIVA Lab Washer Series
Complete sterile processing solutions
The TIVA product line corresponds with Tuttnauer’s vision, to provide complete end-to-end solutions for
reprocessing needs to all the industries it serves, in particular for laboratories. Incorporating a glassware washer in
your lab provides for maximum flexibility, sustainability, and an efficient driven solution for glassware treatment.
Premium Performance
• Up to 40 washing programs. Preset and customized
• Water quality monitoring
• Validation of every cycle using continuous water pressure monitoring
• Quick drying phases due to a steam condenser system
• Uniform forced air drying, dust blocking (HEPA filter is optional)
• Accelerated heating time by using an integrated boiler (optional)
• Reduced program times and electricity consumption using hybrid
heating system (optional)
• Water softener system (optional)
• Conductivity probe (optional)
200 mm 200 mm
F F
20 mm 20 mm
50 mm 50 mm
600 mm
600 mm
D2 D2 E E
E E
1000 mm
1000 mm
500 mm 500 mm
845 mm
845 mm
S S
550 mm 550 mm
635 mm
635 mm
Min. 100 mm
Min. 100 mm
239 mm
239 mm
D2 D2
C2 C2
B A D H B A O GD H O G
30 mm
30 mm
1235 mm 1235 mm
Legend
A Hot water connection - male-thread G ¾" (tube G ½") F Omnipolar magneto switch with a circuit breaker
B Cold water connection - male-thread G ¾" (tube G ½") G Electrical connection box
C2 Drain Ø1" ½ (DN40) - hose connection 1" (25mm) (at floor) H Equipotential clamp
D Drain connection to the machine O Deionized water connection - male-thread G ¾" (tube G ½")
D2 Drain Ø1" ½ (DN40) - hose connection 1" (25mm) (at wall) S Steam outlet exhaust
200 mm 200 mm
F F
20 mm 20 mm
50 mm 50 mm
600 mm
600 mm
D2 D2
E E
E E
1000 mm
1000 mm
500 mm 500 mm
845 mm
845 mm
S S
550 mm 550 mm
635 mm
635 mm
Min. 100 mm
Min. 100 mm
239 mm
239 mm
C2 C2 D2 D2
B A D HB A D
OH O G G
30 mm
30 mm
1235 mm 1235 mm
Legend
A Hot water connection - male-thread G ¾" (tube G ½") F Omnipolar magneto switch with a circuit breaker
B Cold water connection - male-thread G ¾" (tube G ½") G Electrical connection box
C2 Drain Ø1" ½ (DN40) - hose connection 1" (25mm) (at floor) H Equipotential clamp
D Drain connection to the machine O Deionized water connection - male-thread G ¾" (tube G ½")
D2 Drain Ø1" ½ (DN40) - hose connection 1" (25mm) (at wall) S Steam outlet exhaust
Standard Features
Certified according to 2006/42/EC, 2014/35/EU,
2011/65/EU, 2014/30/EU, EN61010-1, EN 61326-1
Pluming system, designed to isolate the potable
water pipeline system (water gap) as prescribed
by EN 1717
Wash chamber made of high quality stainless steel,
AISI 316L (EN 1.4404)
Manual door with interlock
Optional Features
HEPA H14 filter + + / + /
Conductivity probe + + + + +
Max pump flow rate 370 L/min 370 L/min 370 L/min 370 L/min 370 L/min
Max drying fan flow rate with filter 180 m³/h 180 m³/h - 180 m³/h -
The reference values are based on a voltage of 230 V between Phase and Neutral (between Phase and Phase in three-phase
versions without Neutral) with a possible variance between -5 and +10%.
* Max absorbed power varies for each voltage. Please check the configuration data-sheet for exact figures
Lab
TIVA8-1ML | TIVA8-X-1ML | TIVA8-XE-1ML
TIVA8-WD-1ML | TIVA8-WD-XE-1ML
RACKS
400 400
400 400
600 ml
APPROX. VOL.
600 ml
APPROX. VOL.
600 ml
APPROX. VOL.
600 ml
APPROX. VOL.
300 300 300
300
200 200
200 200
100 100
100
100
9
8
7
6
5
4
3
2
5ml
AS
0,1
0,1
250 mm 535 mm
0
BULB PIPETTES
Ex 20°C
AS
0,02
10
ml
10
PASTEUR PIPETTES
Ex20°C
AS
ml
3
0
4
5ml
AS
0,1
0,1
5
0
All 290 mm
BULB PIPETTES
Ex 20°C
AS
0,02
10
ml
10
PASTEUR PIPETTES
Ex20°C
AS
ml
3
0
4
119905126 500
400
500
400
500
400
500
400
600 ml
APPROX. VOL.
600 ml
APPROX. VOL.
600 ml
APPROX. VOL.
600 ml
APPROX. VOL.
Machine equipped with a manual opening and closing door made of double tempered glass, for laboratory
glassware with 4 independent levels. The upper levels are removable for washing large materials. Is equipped
with a system that filters, electrically heats and forces, with a powerful blower, the air in the wash chamber and
inside the hollow instruments, to obtain an excellent drying result. A wide range of racks, nozzles and accessories
complete these machines, suitable to wash and dry a wide variety of laboratory glassware.
Dosing pumps
Up to 4 dosing pumps with level control sensors and
flow meters for monitoring the detergent quantity can
be mounted (2 dosing pumps are already mounted in
the standard machine).
Legend
Hot water connection - male-thread G
670 mm A ¾" (tube G ½")
650 mm
63 mm
Cold water connection - male-thread G
B ¾" (tube G ½")
F
1850 mm
circuit breaker
Max 1200 mm | Min. 300 mm
1400 mm
H Equipotential clamp
790 mm
D2
G
Min. 150 mm
100
Max 300 mm
mm
435 mm
280 mm
100 mm
640 mm S Steam connection G da ½” (outlet)
TIVA10-1VL
AUTOMATIC DOOR
Machine equipped with an automatic sliding door, of double tempered glass, for laboratory glassware with 4
independent levels. The upper levels are removable for washing large items. Is equipped with a system that
filters, electrically heats and forces, with a powerful blower, the air in the wash chamber and inside the hollow
instruments, to obtain an excellent drying result. A wide range of racks, nozzles and accessories complete these
machines, suitable to wash and dry a wide variety of laboratory glassware.
ATIC
Dosing pumps AUTOM R
DOO
Up to 4 dosing pumps with level control sensors and
flow meters for monitoring the detergent quantity
can be mounted (2 dosing pumps are already
mounted in the standard machine).
Legend
680 mm Hot water connection- male-thread G ¾"
A (tube G ½")
670 mm
Cold water connection- male-thread G
B ¾" (tube G ½")
Min. 300 mm
breaker
1400 mm
705 mm
G
Min. 150 mm
Max 300 mm
Max drying fan flow rate with filter: 150 m³/h 150 m³/h
Certificated plumbing system, designed to isolate the potable water pipeline system (water gap)
as prescribed by European Standard EN 1717:
Automatic door:
Wash chamber made of high quality stainless steel, AISI 316L (EN 1.4404):
Drain pump: + +
Conductivity probe: + +
The reference values are based on a voltage of 230 V between Phase and Neutral (between Phase and Phase in three-phase versions without Neutral) with a possible variance between -5 and +10%.
Lab
TIVA10-1ML | TIVA10-1VL
RACKS
119905133 500
400
500
400
500
400
600 ml
500
400
APPROX. VOL.
600 ml
APPROX. VOL.
600 ml
APPROX. VOL.
600 ml
APPROX. VOL.
300 300 300
300
200 200
200 200
100 100
100
100
9
8
7
6
5
4
3
2
5ml
AS
0,1
0,1
pipettes
0
250 mm 760 mm
Bulb
Ex 20°C
AS
0,02
10
ml
10
pipettes
Pasteur
Ex20°C
AS
ml
pipettes
3
0
4
5ml
AS
0,1
0,1
pipettes
0
10
ml
10
pipettes
Pasteur
Ex20°C
AS
ml
pipettes
3
0
4
5ml
AS
0,1
0,1
pipettes
5
0
10
pipettes
ml
10
Pasteur
Ex20°C
AS
pipettes
ml
3
0
4
119905128 500
400
500
400
500
400
600 ml
500
400
APPROX. VOL.
600 ml
APPROX. VOL.
600 ml
APPROX. VOL.
600 ml
APPROX. VOL.
300 300 300
300
200 200
200 200
100 100
100
100
9
8
7
6
5
4
3
2
119905129
500 500
500 500
400 400
400 400
600 ml
APPROX. VOL.
600 ml
APPROX. VOL.
600 ml
APPROX. VOL.
600 ml
APPROX. VOL.
300 300 300
300
200 200
200 200
100 100
100
100
9
8
7
6
5
4
3
2
Machine equipped with an automatic sliding door, of double tempered glass, for laboratory glassware with 4
independent levels. The upper levels are removable for washing large materials. On request, it can be equipped
with a system that filters, electrically heats and forces, with a powerful blower, the air in the wash chamber and
inside the hollow instruments. A wide range of racks, nozzles and accessories, suitable to wash and dry a wide
variety of laboratory glassware.
ATIC
Dosing pumps AUTOM R
D O O
Up to 5 dosing pumps with level control sensors and
flow meters for monitoring the detergent quantity
can be mounted (2 dosing pumps are already
mounted in the standard machine).
890 mm
90 mm
1000 mm B O A G
D2
680 mm
Max 1200 mm
1900 mm
Min. 300 mm
1400 mm
R Q
865 mm
D2
Min. 150 mm
Max 300 mm
50 mm
C2 C2
H H
100 mm 439,5 mm
40 mm
392 mm 608 mm
Standard + Optional / Not available
The reference values are based on a voltage of 230 V between Phase and Neutral (between Phase and Phase in three-phase versions without Neutral) with a possible variance between -5 and +10%.
Legend
H Equipotential clamp
RACKS
119911025
500 500
500 500
400 400
400 400
600 ml
APPROX. VOL.
600 ml
APPROX. VOL.
600 ml
APPROX. VOL.
600 ml
APPROX. VOL.
300 300 300
300
200 200
200 200
100 100
100
100
9
8
7
6
5
4
3
2
119911024 500
400
500
400
500
400
500
400
600 ml
APPROX. VOL.
600 ml
APPROX. VOL.
600 ml
APPROX. VOL.
600 ml
APPROX. VOL.
5ml
AS
0,1
0,1
5
pipettes
0
250 700 mm
Bulb
Ex 20°C
AS
0,02
10
ml
10
pipettes
Pasteur
Ex20°C
AS
ml
pipettes
3
0
4
NOZZELS
450
400
900 900
350
800 800
APPROX. VOL.
APPROX. VOL.
500 500 200
500 ml 1000 ml 1000 ml
400 400
APPROX. VOL.
400
150
300 300
30 0 100
200 200
200
50
100 100
9
8
7
6
5
4
3
2
P00001008
A093 NOZZLE Ø6 C H=120
External dimensions WxH: 75x120 mm.
P00001009
A094 NOZZLE Ø6 C+S H=140
External dimensions WxH: 75x140 mm.
500 ml
450
400
350
300
250
200
150
100
250 ml 50
P00001011
A096 NOZZLE Ø6 C+S H=230 HIGH CAPACITY GRADUATED
FLASKS CYLINDERS
External dimensions WxH: 75x230 mm.
P00001012
A097 NOZZLE Ø6 C+S H=280
External dimensions WxH: 75x280 mm.
Code Image Description Additional Description
900
800
700
500 600
APPROX. VOL.
500
500 ml 1000 ml
400
APPROX. VOL.
400
300
30 0
200
200
450
400
350
300
500 250
200
500 ml
APPROX. VOL.
400
500 ml 150
30 0
100
200
50
P00001021
A106 NOZZLE Ø4 C H=76
External dimensions WxH: 54x76 mm.
STANDARD NOZZLES - Ø 4 mm
P00001022
A107 NOZZLE Ø4 C+S H=111 Suitable for washing the following glassware:
External dimensions WxH: 54x111 mm.
500 ml
450
400
350
300
250
200
150
100
250 ml 50
P00001023
A108 NOZZLE Ø4 C+S H=176
External dimensions WxH: 54x176 mm.
P00001024
A109 NOZZLE Ø2.5 P H=81
External dimensions WxH: 15,5x81 mm.
P00001025
A110 NOZZLE Ø2.5 P+S H=81
External dimensions WxH: 15,5x81 mm.
P00001027
A112 NOZZLE Ø2.5 C H=81 50 ml
P00001028
A113 NOZZLE Ø2.5 C H=156
External dimensions WxH: 32x156 mm.
TIVA LAB LINE
ACCESSORIES
Code Image Description
119905072
TEST TUBES
PETRI DISHES
External dimensions WxDxH: 470x240x77 mm.
D00570100
A115 BOTT. RIGID SUPPORT Ø33
Bottle holder Ø 33 mm for nozzles with rigid inside Ø 6 mm
D00570300
A116 BOTT. RIGID SUPPORT Ø45
Bottle holder Ø 45 mm for nozzles with rigid inside Ø 6 mm
467010017
A128 ADAP. MALE LUER TO M8X1 MALE THREAD
Luer-Lock attachment adapter
467010018
A129 PVDF FEMALE LUER TO 3/16" HOSE BARB
Hose holder for Luer-Lock attachment
467010019
A131 PVDF MALE LUER TO 3/16" HOSE BARB
Hose holder for Luer-Lock attachment
467010020
A132 PVDF FEMALE LUER TO 1/4" HOSE BARB
Hose holder for Luer-Lock attachment
467010021
A133 PVDF MALE LUER TO 1/4" HOSE BARB
Hose holder for Luer-Lock attachment
467010022
A134 PVDF ELBOW FITTING 1/4" HOSE BARB
Hose holder for Luer-Lock attachment
Did you know?
Laboratories in 142 countries around the world, are using Tuttnauer autoclaves.
Boasting 95 years of industry experience, Tuttnauer delivers state-of-the-art solutions
for all laboratory types, with a product line that comes in a wide range of sizes and
precise, top-level sterilization capabilities, covering all laboratory requirements.
Distributed by: