Professional Documents
Culture Documents
AOI21357
AOI21357
TO252 TO-251A
DPAK IPAK
TopView
D
Bottom View Top View Bottom View
D
D
G
D G S
D S S G
D D
S G S
G
Orderable Part Number Package Type Form Minimum Order Quantity
AOD21357 TO-252 Tape & Reel 2500
AOI21357 TO-251A Tube 3500
Thermal Characteristics
Parameter Symbol Typ Max Units
Maximum Junction-to-Ambient A t ≤ 10s 15 20 °C/W
RqJA
Maximum Junction-to-Ambient A D Steady-State 40 50 °C/W
Maximum Junction-to-Case Steady-State RqJC 1.3 1.6 °C/W
A. The value of R qJA is measured with the device mounted on 1in 2 FR-4 board with 2oz. Copper, in a still air environment with T A =25°C. The Power
dissipation P DSM is based on R qJA t≤ 10s and the maximum allowed junction temperature of 150 °C. The value in any given application depends on
the user's specific board design.
B. The power dissipation P D is based on T J(MAX)=150°C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation
limit for cases where additional heatsinking is used.
C. Single pulse width limited by junction temperature T J(MAX)=150°C.
D. The RqJA is the sum of the thermal impedance from junction to case R qJC and case to ambient.
E. The static characteristics in Figures 1 to 6 are obtained using <300 ms pulses, duty cycle 0.5% max.
F. These curves are based on the junction-to-case thermal impedance which is measured with the device mounted to a large heatsin k, assuming a
maximum junction temperature of T J(MAX)=150°C. The SOA curve provides a single pulse rating.
G. The maximum current rating is package limited.
H. These tests are performed with the device mounted on 1 in 2 FR-4 board with 2oz. Copper, in a still air environment with T A=25°C.
APPLICATIONS OR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT
ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE
PRODUCT DESIGN,FUNCTIONS AND RELIABILITY WITHOUT NOTICE.
80 80
-10V -4.5V VDS=-5V
-4V
60 60
-ID (A)
-ID (A)
40 -3.5V 40
125°C
20 20
25°C
VGS=-3V
0 0
0 1 2 3 4 5 1 2 3 4 5
15 1.6
Normalized On-Resistance
12 VGS=-4.5V VGS=-10V
1.4 ID=-20A
RDS(ON) (mW)
9
1.2
6 VGS=-4.5V
ID=-18A
1
3 VGS=-10V
0 0.8
0 5 10 15 20 25 30 0 25 50 75 100 125 150 175
25 1.0E+01
ID=-20A
1.0E+00
20
125°C
1.0E-01
RDS(ON) (mW)
15
-IS (A)
125°C 1.0E-02
10
1.0E-03 25°C
5 25°C 1.0E-04
0 1.0E-05
2 4 6 8 10 0.0 0.2 0.4 0.6 0.8 1.0
-VGS (Volts) -VSD (Volts)
Figure 5: On-Resistance vs. Gate-Source Voltage Figure 6: Body-Diode Characteristics
(Note E) (Note E)
10 4000
VDS=-15V
ID=-20A 3500
8 Ciss
3000
Capacitance (pF)
2500
-VGS (Volts)
6
2000
4
1500
1000
2 Coss
500
Crss
0 0
0 10 20 30 40 50 60 0 5 10 15 20 25 30
1000.0 500
TJ(Max)=150°C
TC=25°C
100.0 10ms 400
RDS(ON)
limited 100ms
Power (W)
300
-ID (Amps)
10.0
1ms
DC 10ms 200
1.0
TJ(Max)=150°C
TC=25°C 100
0.1
0
0.0 0.0001 0.001 0.01 0.1 1 10 100
0.01 0.1 1 10 100
Pulse Width (s)
-VDS (Volts) Figure 10: Single Pulse Power Rating Junction-to-
-VGS> or equal to -4.5V Case (Note F)
Figure 9: Maximum Forward Biased
Safe Operating Area (Note F)
10
D=Ton/T In descending order
ZqJC Normalized Transient
RqJC=1.6°C/W
1
Ton
T
0.01
1E-05 0.0001 0.001 0.01 0.1 1 10 100
Pulse Width (s)
Figure 11: Normalized Maximum Transient Thermal Impedance (Note F)
80 80
60 60
Power Dissipation (W)
20 20
0 0
0 25 50 75 100 125 150 0 25 50 75 100 125 150
10000
TA=25°C
1000
Power (W)
100
10
1
1E-05 0.001 0.1 10 1000
10
ZqJA Normalized Transient
1 RqJA=50°C/W
0.1
PDM
0.01 Single Pulse
Ton
T
0.001
0.0001 0.001 0.01 0.1 1 10 100 1000
Pulse Width (s)
Figure 15: Normalized Maximum Transient Thermal Impedance (Note H)
Ig
Charge
td(on) tr td(off) tf
Vgs
-
Vgs DUT VDC
Vdd 90%
Rg
+
Vgs 10%
Vds
Id Vds
- BVDSS
Vgs
Vgs VDC
Vdd
Rg
+ Id
I AR
DUT
Vgs Vgs
Vds + Q rr = - Idt
DUT
Vgs
t rr
Vds - L -Isd -I F
Isd dI/dt
+ Vdd -I RM
Vgs VDC
Vdd
Ig
- -Vds