Professional Documents
Culture Documents
MNP DS 4023
MNP DS 4023
DS 4023
OFFSHORE DATA SHEET FOR
BATTERY & BATTERY Rev. No. 0
DESIGN
CHARGER
SECTION Discipline Elect
Page 1 of 6
A. BATTERIES
1.0 SITE CONDITIONS
1.1 Location : *
1.2 Installation : *
1.3 Design Ambient Temperature : as per general design criteria
1.4 Altitude : as per general design criteria
1.5 Relative Humidity : as per general design criteria
1.6 Presence of H2S in atmosphere : No
2.0 TECHNICAL PARTICULARS
2.1 Tag No : *
2.2 Make/type :
2.3 Terminal voltage of battery bank
i) Nominal (open ckt. voltage) :
ii) Maximum (at the end of :
boost discharge)
iii) Minimum (at the end of discharge) :
2.4 Capacity at 5 hr rate of discharge
(at 16°C/27°C/40°C) :
2.5 Number of cells in the Bank :
2.6 Type of construction-
i) Positive Plate :
ii) Negative Plate :
2.7 No. of Positive Plates per cell :
2.8 No. of Negative Plates per cell :
2.9 Type, material & thickness of separators :
2.10 Internal resistance of each cell :
2.11 Electrolyte-
i) Quantity :
ii) Specific gravity (at full charge :
& at end of discharge
2.12 Charging rate for each cell-
a) Float voltage/current :
b) Boost voltage/current :
c) Equalise voltage/current :
2.13 Time for Boost charging : 10 hours
(0 to 100% capacity)
2.14 Permissible ripple content : < 5%
in charging voltage
2.15 Maximum permissible
Electrolyte temperature-
SPEC. No. DS 4023
OFFSHORE DATA SHEET FOR
BATTERY & BATTERY Rev. No. 0
DESIGN
CHARGER
SECTION Discipline Elect
Pages 2 of 6
i) Continuous :
ii) Short time :
2.16 Temperature correction factor :
for charging voltage
2.17 Cycle life of cell :
(for 70 and 100% DOD)
2.18 Temp. sensor provided inside the cell: Yes/No
2.19 No. of cells in which temp. sensor :
provided
2.20 Size of each cell (LxWxH) :
2.21 Weight of each cell with Electrolyte :
2.22 Battery rack-
a) No. of rows & tiers :
b) Dimensions (LxWxH) :
c) Weight (Rack & Batteries) :
2.23 Inter cell/ Inter row connectors-
a) Numbers :
b) Material :
B. BATTERY CHARGERS
NOTES
1. DATA MARKED WITH ASTERISK (*) SHALL BE FILLED UP BY
CONTRACTOR.ALL OTHER DATA SHALL BE FILLED UP BY VENDOR
AND FURNISHED ALONGWITH THE BID.
A 110 V DC
B 24 V DC
NOTES:
1. DATA MARKED WITH ASTERISK (*) SHALL BE DECIDED BY
CONTRACTOR & FURNISHED TO VENDOR.
SPEC. No. DS 4023
OFFSHORE DATA SHEET FOR
BATTERY & BATTERY Rev. No. 0
DESIGN
CHARGER
SECTION Discipline Elect
Pages 6 of 6