Professional Documents
Culture Documents
Bomba 330C
Bomba 330C
Bomba 330C
Page 1 of 11
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 330C L EXCAVATOR CAP01546
Configuration: 330C L & 330C LN Excavators CAP00001-UP (MACHINE) POWERED BY C-9 Engine
i01801873
S/N - BTM1-UP
S/N - CAP1-UP
S/N - CGZ1-UP
S/N - CYA1-UP
S/N - DKY1-UP
S/N - GAG1-UP
S/N - GKX1-UP
S/N - HAA1-UP
S/N - JAB1-UP
S/N - JCD1-UP
S/N - JNK1-UP
S/N - KDD1-UP
S/N - MCA1-UP
S/N - MKM1-UP
S/N - RBH1-UP
Removal Procedure
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 6/3/2024
330C L & 330C LN Excavators CAP00001-UP (MACHINE) POWERED BY C-9 En... Page 2 of 11
Table 1
Required Tools
Tool Part Number Part Description Qty
6V-9508 Face Seal Plug 4
6V-9829 Cap As 4
6V-9509 Face Seal Plug 2
6V-9830 Cap As 2
A 6V-9511 Face Seal Plug 1
6V-9832 Cap As 1
6V-9512 Face Seal Plug 3
6V-9833 Cap As 3
5H-4020 Face Seal Plug 5
B 4C-8359 Eyebolt 1
Start By:
A. Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic
System Pressure - Release" in this manual.
B. Remove the hood. Refer to Disassembly and Assembly, "Hood - Remove".
C. Remove the muffler. Refer to Disassembly and Assembly, "Muffler - Remove".
NOTICE
NOTICE
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 6/3/2024
330C L & 330C LN Excavators CAP00001-UP (MACHINE) POWERED BY C-9 En... Page 3 of 11
Remove the filler cap only when the engine is stopped and the filler cap
is cool enough to touch.
Note: A hydraulic oil sample should be obtained before any maintenance is performed in order to
establish the system contaminant level. Refer to Fluid Analysis Laboratory Guide, SEBF3116,
"Obtaining an Oil Sample for S·O·S Analysis". Refer to Operation and Maintenance Manual,
"Sampling Interval and Location of Sampling Valve" for the correct location.
1. Start the machine, and fully extend the stick and the bucket. Lower the stick and the bucket
to the ground.
2. Drain the oil from the hydraulic oil tank into a suitable container for storage or disposal.
The capacity of the hydraulic oil tank is 175 L (46 US gal).
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 6/3/2024
330C L & 330C LN Excavators CAP00001-UP (MACHINE) POWERED BY C-9 En... Page 4 of 11
Illustration 1 g00902748
Illustration 2 g00902749
Illustration 3 g00902750
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 6/3/2024
330C L & 330C LN Excavators CAP00001-UP (MACHINE) POWERED BY C-9 En... Page 5 of 11
Illustration 4 g00902752
Illustration 5 g00902754
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 6/3/2024
330C L & 330C LN Excavators CAP00001-UP (MACHINE) POWERED BY C-9 En... Page 6 of 11
Illustration 6 g00902757
Illustration 7 g00902761
Illustration 8 g00903018
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 6/3/2024
330C L & 330C LN Excavators CAP00001-UP (MACHINE) POWERED BY C-9 En... Page 7 of 11
Illustration 9 g00903019
Illustration 10 g00903020
15. Remove bolts (21). Bolts (21) secure bracket (22) to the main hydraulic pump.
Illustration 11 g00903022
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 6/3/2024
330C L & 330C LN Excavators CAP00001-UP (MACHINE) POWERED BY C-9 En... Page 8 of 11
17. Remove bolt (26). Bolt (26) secures harness assembly (27) to the main hydraulic pump.
Illustration 12 g00903024
18. Disconnect harness assembly (28). Remove bolts (29) from the bracket of the harness
assembly.
Illustration 13 g00903026
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 6/3/2024
330C L & 330C LN Excavators CAP00001-UP (MACHINE) POWERED BY C-9 En... Page 9 of 11
Illustration 14 g00903043
21. Remove the remaining bolts (30). Bolts (30) secure the pump housing to the engine.
22. Remove the main hydraulic pump from the machine. The weight of the pump and pump
housing is approximately 220 kg (485 lb).
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 6/3/2024
330C L & 330C LN Excavators CAP00001-UP (MACHINE) POWERED BY C-9 ... Page 10 of 11
Illustration 15 g00903047
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 6/3/2024
330C L & 330C LN Excavators CAP00001-UP (MACHINE) POWERED BY C-9 ... Page 11 of 11
Illustration 16 g00905234
Illustration 17 g00905273
Copyright 1993 - 2024 Caterpillar Inc. Wed Mar 6 13:03:49 EST 2024
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 6/3/2024